digitalFAQ.com Forums [Archives]

digitalFAQ.com Forums [Archives] (http://www.digitalfaq.com/archives/)
-   Authoring VCD, DVD, Blu-ray (http://www.digitalfaq.com/archives/author/)
-   -   Video file Too big to burn? (http://www.digitalfaq.com/archives/author/3433-video-file-big.html)

Locutus 04-29-2003 10:43 AM

Video file Too big to burn?
 
The mpeg (vcd) I made is 786 MB big. This should normally fit on a 80 min CD-R.
But if I try to burn it with Nmero as as VCD it shows the file as 775MB...way too much to burn. Then I tried to make an image with VCD Easy. But the image I got is about 900MB big. Too big again.

What am I doing wrong?

el_mero_zooter 04-29-2003 12:54 PM

theoritically, one could fit about 825 +- mb's on a 700mb cd,,,as you'd be burning in Mode2 {or should be anyhow} and if you're burning a kvcd or vcd, you;d be burning video {or audio as opposed to data, which you could get about 720mb or so with overburning}


You're file sizes are good to go---will fit on a 700mb/80min cdr.
If possible try to burn at around 8x or so.


Have a quick read thru the following guides over at vcdhelp....

http://www.dvdrhelp.com/nero.htm
http://www.dvdrhelp.com/vcdeasyhowto.htm


Ztr

Locutus 04-29-2003 01:27 PM

I`ve read a bit further here and came to the conclusion that it must have to with the muxing.
The m1v is 698 MB (mpeg1), the mp2 is 80 MB.
What are the settings in BBMPEG to mux it, that I can put it on a 700MB CD-R(W)

Sykes 06-24-2003 06:49 PM

58 minute >:-) file 887 mb <:-(
 
I have a 887 mb mpeg1 kvcdx3 file that is 58 mins long will i be able ta burn to a 700mb cdr in mode 2 ?

vico1 06-24-2003 07:33 PM

Re: 58 minute >:-) file 887 mb <:-(
 
Quote:

Originally Posted by Sykes
I have a 887 mb mpeg1 kvcdx3 file that is 58 mins long will i be able ta burn to a 700mb cdr in mode 2 ?

No...The "Golden Rule" is: MaxMB = Minutes of Cdr Multiplied by 10.
(ie: 800Megs = 80min Cdr) (900Megs = 90min Cdr) (990Megs = 99min Cdr) ect.
That said...you may get a little more with "OverBurn" on each length of disc, depends
on Burner and individual Media.


*******************************
The Devil`s always.....in the Details!

Sykes 06-24-2003 07:51 PM

Sounds good vico thankx :D

Edlund 09-19-2003 03:45 AM

Quote:

Originally Posted by Locutus
I`ve read a bit further here and came to the conclusion that it must have to with the muxing.
The m1v is 698 MB (mpeg1), the mp2 is 80 MB.
What are the settings in BBMPEG to mux it, that I can put it on a 700MB CD-R(W)

I have the same problem but I don't have to open a new thread beacause here wasn't given an answer. So what do I do to mux the file right. My mpg is ~785MB but after making an image with vcdeasy it goes ~885. I think it's related to the autopadding. Here's what vcdeasy says during the image making :
Quote:

autopadding requires to insert additional 111021828 zero bytes into MPEG stream (due to 402253 unaligned packets of 402254 total)

Edlund 09-19-2003 05:59 AM

I solved the problem by encoding the audio in 224kbps (it was 320:)

WOWIEGURL 04-22-2004 07:17 AM

Quote:

Originally Posted by Edlund
I solved the problem by encoding the audio in 224kbps (it was 320:)

what did you encode the audio with ? heada3che?


All times are GMT -5. The time now is 02:48 AM  —  vBulletin © Jelsoft Enterprises Ltd

Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.