Bitrates: CQMatic issue with just flickering, TmpgEnc then closing it
 

I have tried alot of things having to do with the Source range, but I dont get any errors, I just can't use CQMatic with it. I can manually encode the video at any CQ I like. Any ideas.


Here is my TmpgEnc file.

http://www.rage-board.com/files/Opti4.tpr

You have to reset the source range anytime before to save your script

Reset is not just to uncheck it, it is to enter in the source range setting, click on defaut, reset cut editing (in the dropdown menu on the bottom left), then exit from source range and uncheck it.

Is there anything you don't know the answer too?

Thanks again.

A lot. But few people ask something about them :D

:rotf:

I am having the same problem but instead of clearing the source range, I start afresh.. load everyting back up.. use cq matic but I still have the same problem. tmgpenc flickers briefly and then creashes and the figures in the log is negatives

CQMatic Version 1.4.08
http://www.kvcd.net
Copyright KVCD.Net, 2004.
All rights reserved.
Time: 23:23:45 Date: 07/21/2006

Execute.
Movie Time: 69:30
Average Bitrate: 777.2
Full Encode mode
Executing Prediction Phase...
Process started at 23:41:38
On 07/21/2006
Preparing for calibration phase...
Calibration phase started.
Step 1 of 10.
Step 2 of 10.
Step 3 of 10.
Step 4 of 10.
Step 5 of 10.
Step 6 of 10.
Step 7 of 10.
Step 8 of 10.
Step 9 of 10.
Step 10 of 10.
Calibration phase complete.
CQ set for prediction
Setting up sampling.
Phase 1 of 7, cycle 1
Encoder started...
Process time: 0.22 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 60.000000
High fence: 90.000000
Last CQ = 60.00
Current CQ = 75.00
CQ difference = 15.000000
Phase 1 of 7, cycle 2
Encoder started...
Process time: 0.22 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 75.000000
High fence: 90.000000
Last CQ = 75.00
Current CQ = 82.50
CQ difference = 7.500000
Phase 1 of 7, cycle 3
Encoder started...
Process time: 0.22 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 82.500000
High fence: 90.000000
Last CQ = 82.50
Current CQ = 86.25
CQ difference = 3.750000
Phase 1 of 7, cycle 4
Encoder started...
Process time: 0.23 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 86.250000
High fence: 90.000000
Last CQ = 86.25
Current CQ = 88.13
CQ difference = 1.875000
Phase 1 of 7, cycle 5
Encoder started...
Process time: 0.23 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 88.125000
High fence: 90.000000
Last CQ = 88.13
Current CQ = 89.06
CQ difference = 0.937500
Phase 1 of 7, cycle 6
Encoder started...
Process time: 0.27 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 89.062500
High fence: 90.000000
Last CQ = 89.06
Current CQ = 89.53
CQ difference = 0.468750
Setting up sampling.
Phase 2 of 7, cycle 1
Encoder started...
Process time: 0.35 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 89.531250
High fence: 90.000000
Last CQ = 89.53
Current CQ = 89.77
CQ difference = 0.234375
Setting up sampling.
Phase 3 of 7, cycle 1
Encoder started...
Process time: 0.22 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 89.765625
High fence: 90.000000
Last CQ = 89.77
Current CQ = 89.88
CQ difference = 0.117188
Setting up sampling.
Phase 4 of 7, cycle 1
Encoder started...
Process time: 0.23 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 89.882813
High fence: 90.000000
Last CQ = 89.88
Current CQ = 89.94
CQ difference = 0.058594
Setting up sampling.
Phase 5 of 7, cycle 1
Encoder started...
Process time: 0.20 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 89.941406
High fence: 90.000000
Last CQ = 89.94
Current CQ = 89.97
CQ difference = 0.029297
Setting up sampling.
Phase 6 of 7, cycle 1
Encoder started...
Process time: 0.22 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 89.970703
High fence: 90.000000
Last CQ = 89.97
Current CQ = 89.99
CQ difference = 0.014648
Setting up sampling.
Phase 7 of 7, cycle 1
Encoder started...
Process time: 0.20 minutes.
Encoder end.
File size difference = -2851602.500000
Low fence: 89.985352
High fence: 90.000000
Last CQ = 89.99
Current CQ = 89.99
CQ difference = 0.007324
Final CQ value is 89.73
Encoding test sample at 89.73
Encoding set to Full encode.
Full encode start...
CQMatic complete!
Total minutes of process: 5.58
Process ended at 23:47:13
On 07/21/2006

I have already re-downloaded the cqmatic,calmatic and tmpgenc to see if the newest ones would make any diffreence but nothing worked. I don't understand what I am doing wrong

Look at there :
http://www.kvcd.net/forum/viewtopic....ht=step#118866