KVCD Template 352x576 with TMPENC makes too big FILES!!
 

Hi Every Body I tried my OWN DVD From Dusk Till Dawn and this Movie is 104 Min and I look at the filessize and its 50 MB for 5 Minutes, thats too MUCH!
10 Min 100 MB
80 Min 800 MB <= CD FULL

SO I don't encode it to the end but what did I wrong, please help, Dary

Dary,

Dude, I've got the same problem. I can do anything under 80 minutes, but anything over I get huge files. It's like the dang templates don't work. I haven't figured it out yet, but will let you know as soon as I figure something out. Please do the same for me.

I'm using VirtualDub for capturing AVIs. PowerVCR and AverTVstudio for capturing MPEGs. SmartRipper to rip DVDs and DVD2AVI to make the files for TMPEGenc.

What have you tried?

I tried TMPENC with the 1st VOB from the DVD

Read Q-9 here: http://www.kvcd.net/forum/viewtopic.php?p=326#326

-kwag

DARY,

load the kVCDx3 template and bump the CQ between 65-70 with a max bitrate of 2500, and select the default Q-Matrix.
do you use AVIsynth? is you do, end the script with a smoother to help soften block noise as well as lowering filesize. here is an example:

LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\MPEG2DEC.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\decomb.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\fluxsmooth.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\blockbuster.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\legalclip.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\sampler.dll")
mpeg2source("E:\XXXX\xxxx.d2v")
LegalClip()
FluxSmooth()
TemporalSmoother(1,2)
LegalClip()
ConvertToRGB()

if all else fails, try lowering the resolution to maybe 352x480, or if need be, 352x240.
hope this helps... good luck!!!

BSBECK,

you use powerVCR? i cant get mine to work properly. everything is cool, but my audio sync is so terrible. any ideas?

Dary,

Hooray!!! I got it to work. I just made a 120 minute movie into 720 meg MPEG file. I had to change the stream type from MPEG-1 Video CD to MPEG-1 System (VBR). If I use MPEG-1 Video CD (non-standard) it doesn't work. Now the KVCD templates seem to be working just fine.
I didn't notice when I ran the file through VCDEasy, it said the file needed padding. Should I always enable padding in TMPEGEnc ???


DeltaBoy,

I've got an AverMedia TVStudio TV tuner/capture card. It works just fine with PowerVCR. What capture board do you have?

Thanks,
bsbeck

BSBECK,

ive got an aOpen MX400-A card. its great and i can capture AVIs easily. oh... you know what, i bet it is my sound card. gotta turf the soundblaster live! apparently its nothing but problems.

or unless there is a patch im missing. i dunno.

Deltaboy,

I doubt it's the SoundBlaster Live. I've got one and it works great. My brother has an Aopen TI4200 with a SoundBlaster and he uses PowerVCR also. We are both running Asus A7V266E motherboards with AMD Athlon XP 1800+.

bsbeck

i guess the world hates me! ill figure something out.
thanks tho...

where down the dll?
 

LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\MPEG2DEC.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\decomb.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\fluxsmooth.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\blockbuster.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\legalclip.dll")
LoadPlugin("D:\==Appz==\Video Editing\AVIsynth\sampler.dll")
:roll:

KVCD Plus Template 352x576 with TMPENC makes to big FILES!!
 

I'm new to the forum but I am tearing my hair out!!!!
I am trying to encode farscape using the KVCD plus 352x576 (PAL) template and I am producing video with an average size of 15 MB per minute! I recorded the video on a Panasonic DMR-E20, I'm frameserving from AVIsynth and encoding with TMPGEnc Plus 2.59. I am using the folowing avs script:

LoadPlugin("C:\WINDOWS\system32\MPEG2DEC.dll")
LoadPlugin("C:\WINDOWS\system32\fluxsmooth.dll")
LoadPlugin("C:\WINDOWS\system32\blockbuster.dll")
LoadPlugin("C:\WINDOWS\system32\legalclip.dll")
Mpeg2Source("C:\Documents and Settings\Paul\My Documents\My Videos\farscape.d2v")
LegalClip()
LanczosResize(352,576,0,0,704,576)
FluxSmooth()
TemporalSmoother(1,2)
Blockbuster(method="noise", variance=.5, seed=1)
Blockbuster(method="sharpen", detail_min=20, detail_max=90, strength=8 )
LegalClip()
ConvertToRGB()

Help! Does anyone know where I am going wrong. :?

Hi mycroft,

If you're on TMPEG 2.59, make sure that on your stream type you are encoding as "ES (Video only)"

-kwag

First of all, get rid of 'sharpen' . It doesn't do much good and increases the filesize a lot.

Secondly, read the guide black prince wrote. It's a step-by-step one so you should be able to create fine KVCDs using that.

Thanks kwag and Boulder. I'll give it a try! :)