kvcd: losing too much quality with a low cq value?
hi you all,
i did more testing (kvcdx3) with my problems and here is what i have found... 1- finally it worked with tmpgenc & bbmpeg...for tmpgenc i set cq at 60 and did not have an illegal floating point message...it gave me a file of 500 mg app....no message from bbmpeg also with this rate (it was able to write to output file)...so those settings worked finally... 2- retried everything with cq at 70 with tmpgenc and it worked again no error message but when muxing with bbmpeg it stopped at 98%...it was not able to go at 100%...can i use this file anyway... 3- tried with my real cq value (75,53)...ok with tmpgenc no error but bbmpeg is stopping at 82% with the same message...unable to write to output file... 4- tried also tmpgenc with cq value of 80 or higher and it is always giving me the illegal floating error message... 5- am i losing to much quality with a low cq value for that template (kvcdx3) or is it better for me to use only the 352 x 240 which is working? 6- since a low cq (60) value is working for me for kvcdx3, are there other settings that we could use to improve the quality or will i have better results with another template??? thx big |
a
forgot to tell you that i find the quality qiote good with that cq value...
|
Hi big,
Are these errors on the same movie (source), or can you reproduce the same errors on other sources :?: -kwag |
a
every avi source...very weird...but like i said it is working with cq at 60...
|
Re: a
Quote:
-kwag |
a
morgan multimedia...where can we get xvid??
|
Re: a
Quote:
If this is the case, have you tried capturing with the Huffy CODEC, and then processing that :idea: -kwag |
a
no i did not try huffy...
|
Re: a
Quote:
Give the Huffy codec a try :idea: -kwag |
a
if that could solve my problems...i will test everything again...i am very patient (been with the same woman for the last 11 years :):):))
where could i get that codec?? by the way you were wright for lowering my bitrate it solved my problem of jumpiness in dvd... |
Re: a
Quote:
Quote:
Quote:
-kwag |
a
will i have to change my script when huffy is installed?
LoadPlugin("C:\Program Files\NimoCodec Pack\Mpeg2dec\Mpeg2dec.dll") LoadPlugin("C:\Documents and Settings\MichelD\Mes documents\Programmes\GripFit_preview_0.0c\GripFit_ Preview.dll") LoadPlugin("C:\Documents and Settings\MichelD\Mes documents\Programmes\FluxSmooth-1.0\FluxSmooth.dll") LoadPlugin("C:\Documents and Settings\MichelD\Mes documents\Programmes\LegalClip-0.2\LegalClip.dll") LoadPlugin("C:\Documents and Settings\MichelD\Mes documents\Programmes\Sampler-0.2a\Sampler.dll") LoadPlugin("C:\Documents and Settings\MichelD\Mes documents\Programmes\DustV5\DustV5.dll") LoadPlugin("C:\Documents and Settings\MichelD\Mes documents\Programmes\TemporalCleaner\TemporalClean er.dll") avisource("C:\Documents and Settings\MichelD\Mes documents\Films\Lilo.Et.Stitch.FRENCH.DVDRiP.DiVX-Ulysse.avi") ConvertToYUY2() LegalClip() GripCrop( width=528, height=480, overscan=2) GripSize() SpaceDust() Fluxsmooth() TemporalCleaner() GripBorders() LegalClip() #Sampler(length=24) |
a
is version 1.31 ok...
do we have to change some setting once installed? |
Re: a
Quote:
Now you can do some test captures with the Huffy codec and then process them with the .avs script. Huffy and MJPEG are not compatible. -kwag |
a
what do you mean by test captures???
just for your information i am not equiped to rip dvds... |
Re: a
Quote:
After that, if you use VirtualDub, etc., to capture, you'll see the new codec installed on VIDEO compression options. -kwag |
Re: a
Quote:
|
a
it's installed and i saw it in vdub...what next?
|
Re: a
Quote:
-kwag |
a
you mean that i load my script in vdub and choose huffy in the options?
because to avoid illegal floating point in tmpgenc, i startred frameserver in vdub, save .vdr and load the .vdr in tmpgenc... excuse my dumb dumb questions... |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.