Kvcd lose audio and video sync?
Help This is what I have been doing......
Please tell me what I am doing wrong (step-by-step) or point me in the direction of a guide to follow, PLEASE !!!!!! Here is what I have been doing: 1) downloaded .avi file from p2p service this is at 23.976fps 2) use virtualdub to seperate the audio from video 3) use TMPG with videocd(ntscfilm) template - Load video and audio files 4) goto settings and select source range to cut files into 2 parts (to fit on 2 cd-r) 5) after I get my 2 mpeg files I load them into VCDEasy and burn to medium under vcd 2.0 as the type. 6) PLAY IN MY APEX 1100W and I LOOSE AUDIO AND VIDEO SYNC - Looks like a Bad chinees film dub.. PLEASE HELP Someone with success with a APEX 1100W, please give this new guy step-by-step of what I did wrong or what I need to change. Thanks. When do I demux/re-mux, etc???? Confused....... |
I had that problem myself
check in the Audio if its set to 44100 and not 48000 KHz Apex dont like 48000 |
Thanks for the reply Movie,
I forgot to mention that the audio is set at 44100....No compression on the extraction from virtualdub. |
~up
|
Try encoding a small clip at 29.97fps for the Apex. Not at 23.976.
-kwag |
Thanks for the help, I have made a playable copy at 29.9 fps.
Now here is another question...... I am using a 80min 700mb blank media, using this template, what length movie can I fit onto a single media with the movie encoded at 29.9 ?? I have done a 1hr 32min feature under 700mb. Thanks for taking time to answer my newbie questions >....... |
Quote:
ex: 90 * .75 = 67.5 minutes More or less :wink: -kwag |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.