digitalFAQ.com Forums [Archives]

digitalFAQ.com Forums [Archives] (http://www.digitalfaq.com/archives/)
-   Video Encoding and Conversion (http://www.digitalfaq.com/archives/encode/)
-   -   checking the anamorphic output box when FitCD determines source is anamorphic? (http://www.digitalfaq.com/archives/encode/995-checking-anamorphic-output.html)

mpierce 08-27-2002 03:22 PM

checking the anamorphic output box when FitCD determines source is anamorphic?
 
Kwag,

Boy am I eager to check this out. Curious though. When I have used the other templates I have been checking the anamorphic output box when FitCD determines that the source is anamorphic. You have not (per your attached screen shot). Also, I usually use no cropping, but you have used accurate. Should this be the case with the new X3 template if one wished to retain the same AR as the source?

Thanks.
100571

kwag 08-27-2002 03:34 PM

Re: kvcdX3
 
Quote:

Originally Posted by 100571
Kwag,

Boy am I eager to check this out. Curious though. When I have used the other templates I have been checking the anamorphic output box when FitCD determines that the source is anamorphic. You have not (per your attached screen shot). Also, I usually use no cropping, but you have used accurate. Should this be the case with the new X3 template if one wished to retain the same AR as the source?

Thanks.
100571

I never use anamorphic destination on KVCD's, because many TV's don't understand the aspect when playing from a VCD.
Try the other values as they are. You'll be surprised at the results. Like the sample provided :wink:

-kwag

dragonballyobaz 08-27-2002 04:20 PM

what video arrange mode is good to use with the kvcdx3 ,in tmpgenc and what is the dif between full screen keep aspect ratio 2 and 1

ale 08-27-2002 04:29 PM

KVCDx3-MPEG-2-PAL
 
Hi kwag!

I've just tested your brand new templates on two standalone:

the mpeg2 one works very well on a cheap Cybercom 4931 and
the quality is very good.
On the some player the mpeg1 gives some troubles
(a copy shifted on the diagonal of the screen) only on
titles over black background playback.

Sadly enough when played on the Grundig GDV130 the some
clips are both scrambled blocks.

On the some player, the 704x576 'plus' template worked as DVD
(apart little sound problems then solved) but produced shifted copy
when played on the Cybercom 4931 I bought as bargain for my
parents!!

Hope this is useful for other people when choosing players.

Many thanks again for your work! :)

ciao
Ale

p.s.: your 'matrix' sample mpeg1 gives the same results:
plays very well on Cybercom and as a bunch of blocks
on the Grundig

PlaiBoi 08-27-2002 04:31 PM

Is there any REAL differance between the mpeg1 and the mpeg2 version besides the fact that one is mpeg2 and one is mpeg1? Will they both give the EXACT SAME outcome?

kwag 08-27-2002 04:43 PM

Quote:

Originally Posted by dragonballyobaz
what video arrange mode is good to use with the kvcdx3 ,in tmpgenc and what is the dif between full screen keep aspect ratio 2 and 1

Use FitCD, and leave the templates full screen, as they are set.
The proper aspect is then provided by the FitCD script.

-kwag

kwag 08-27-2002 04:53 PM

Quote:

Originally Posted by PlaiBoi
Is there any REAL differance between the mpeg1 and the mpeg2 version besides the fact that one is mpeg2 and one is mpeg1? Will they both give the EXACT SAME outcome?

Quality wise, they're almost the same. File size is larger with the MPEG-2. About 1MB more per minute. So the MPEG-1 is the best for space savings.

-kwag

Nico 08-27-2002 05:40 PM

By the way, how many minutes can I expect from X3???

kwag 08-27-2002 06:20 PM

Quote:

Originally Posted by Nico...
By the way, how many minutes can I expect from X3???

....The average time per 80 minute CD-R is 60 to 65 minutes.
http://www.kvcd.net/forum/viewtopic.php?t=1041

-kwag

Bud 08-27-2002 09:13 PM

New Template
 
Just tested with a DVD-RAM VRO file and it played back great on a Panasonic E20, Panasonic LV55, Panasonic RV32 and a Pioneer DV343, JVC 36 standard TV and a Sony Rear Projection 61", picture was great. Started with Digital Cable, no changes were made to your template.

Aloha
Bud

Bud 08-27-2002 09:59 PM

New Template x3
 
Kwag

Ditto on the GREAT picture with all the samples, all played back on my Panasonic LV55, Panasonic RV32, Panasonic E20, Pioneer DV343, Sony 61" Rear Projection TV, Standard 36" JVC. I just don't have any problems with any templates.


Aloha
Bud

kwag 08-27-2002 10:15 PM

This is good news Bud :D ,
Seems the x3 is the most compatible of all 8O
I'm getting the same results 8O
Thanks for the data. Just updated the DVD models page :wink:

-kwag

aderunn3r 08-28-2002 02:33 AM

i just downloaded the kvcdx3 samples and they r great. i just had one question im one of the few ppl who dont use fit cd and avisynth i just wanted to know if the same results could be acheived just by encodeing the .d2v file in tmpgenc with the kvcdx3 template.

gopalkk 08-28-2002 02:52 AM

Tried in APEX 600A. MPEG-2, its playing but not aligned in TV showing only part of the picture and left half is hidden. Could it be due to no audio as I did not put audio in it?

MPEG-1 sample seems to play but I cant see it at all as its huge colored blocks in between some picture blocks. Donno why, can I do something here.

I will try again but as of now only SKVCD works in APEX 600A.

BTW, today I found that even SKVCD video skips now and then but not horrible like other formats.

Should we all try to stick with compatible DVD players, then.

obrigado 08-28-2002 03:26 AM

why X=528 ?
 
hi KWAG

thanx for informing us about the new
x3 templates.

I took a look into the template and I wonder
why X=528 is choosen for Video.width.

All lower res X width are multiples of
32, so 320, 352, 480, 704 are all valid
sizes conforming to EIA or CCIR
standard. 528 is totaly undefined anywhere.

Maybe some S/A players will agree to work
but the more you stand appart to standards
to more likely you'll be left on your own
somedays.

So what's the resaon for X=528 ?

Obrigado

m0rdant 08-28-2002 05:05 AM

Bud,

The sample you played on the Pioneer 343, did you burn it as a VCD or SVCD?

I just tried the Matrix sample burned as an xVCD and I got the half screen effect.

kwag 08-28-2002 07:02 AM

Re: why X=528 ?
 
Quote:

Originally Posted by obrigado
hi KWAG

thanx for informing us about the new
x3 templates.

I took a look into the template and I wonder
why X=528 is choosen for Video.width.

All lower res X width are multiples of
32, so 320, 352, 480, 704 are all valid
sizes conforming to EIA or CCIR
standard. 528 is totaly undefined anywhere.

Maybe some S/A players will agree to work
but the more you stand appart to standards
to more likely you'll be left on your own
somedays.

So what's the resaon for X=528 ?

Obrigado

There are a few reasons. First, the quality is superior to CVD and SVCD. So now we won't get comments such as "It's softer than a SVCD" from some people, because it's sharper than the best SVCD.
Second, the resolution is called 3/4 DVD. If you use FitCD, you'll see it in the aspects settings. Actually there are two: 3/4 DVD large, and 3/4 DVD small. The small ( 528x480 ) works best. I tried in all my 5 S/A DVD players, and plays flawlessly. As I commented earlier, even the Panasonic RP-56 plays the MPEG-2 version of the x3, burned as a SVCD 8O .
And this player is not supposed to play SVCD. Actually, if you try to play a standard SVCD, it jumps and skips everywhere. The same applies to the Panasonic DMR-E20. This one, plays SVCD for like 2 seconds, then loops back and stays in a loop, playing the same section over and over again. But again, it plays the x3 correctly! Both MPEG-1 and MPEG-2.
Third, it's the best resolution/quality/bitrate combination of all. Lower resolutions you start to loose quality. Higher resolutions, you start to see some blocks on very high speed scenes. So really, this is the cross over point, or the peak resolution, in combination with the Q. Matrix and long GOP.
Fourth, I love non-standards 8) ( Maybe that's why my favorite programming language is FORTH 8O )

-kwag

m0rdant 08-28-2002 07:22 AM

I de/remultiplexed the Matrix sample to SVCD with TMPGEnc and burned as SVCD with VCDeasy. This played on my pioneer 343 and looks really good.

So Kwag, are we better off encoding as mpeg 1 and then multiplexing to mpeg 2, or just use the mpeg 2 template?

Pike 08-28-2002 07:25 AM

kwag could you possibly post an mpeg2 sample so I can try it on my panny RA71.

mpeg1 looks absolutely amazing on it.

kwag 08-28-2002 08:57 AM

Quote:

Originally Posted by Pike
kwag could you possibly post an mpeg2 sample so I can try it on my panny RA71.

mpeg1 looks absolutely amazing on it.

Hi Pike,
For a quick and dirty test, just take any of the samples and re-encode it with the KVCDx2 MPEG-2 template :wink:

-kwag


All times are GMT -5. The time now is 03:59 AM  —  vBulletin © Jelsoft Enterprises Ltd

Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.