my mobile player only plays KVCDs at 352x240?
I finally finished converting Shrek to KVCD and found that my mobile player plays KVCDs @ 352x240. Now what I did with my script was size it to 720x480 and set TMPGEnc's video arrange method to "full screen (keep aspect ratio)" and used the KVCD-CQ-352x240-_NTSCFilm_-PLUS.mcf template. Outcome was fantastic. :D
Now I was wondering, is it possible to use the KVCDx3-MPEG-1-NTSCFilm.mcf template, modify the size to 352x240 and use that same script and the "tweeks" mentioned above :?: The reason being is that KVCDx3 is suppose to be way better. Thanks |
Hey TCC,
What makes the KVCDx3 template look so darn good is the higher resolution (528x480). So if you take the KVCDx3 template and modify the resolution down to 352x240, you really wouldn't be gaining that much because what you're doing is exactly the same as simply using the KVCD-CQ-352x240-_NTSCFilm_PLUS template with a higher Maximum Bitrate of 2500kbps versus 1800kbps (sure this might help a bit on some high-action scenes, but using a higher resolution would raise quality moreso than raising bitrate). Those are the only 2 differences between the 2 templates you're talking about....the resolution and max-bitrates (aside from the "default" CQ levels of course, which are there only as a guideline and should be changed in conjunction with file-prediction so you get the maximum quality out of the allotted space on your cdr). If you haven't already, I'd recommend downloading and testing the KVCD Compatibility Test CD Image found in the "What's Happening" Forum and seeing which templates will play properly on your player....then use the template you like best. :wink: Happy encoding, :) -d&c |
Quote:
What exactly am I suppose to see when I play the compatability cd? |
What you should see is a mini menu with 6 options, one for each Template. I have found on some players this may not show up, if not just try to press each "number" with your remote or the keypad on the player example press 1, see if anything plays then press 2, the ones that play will be the ones that will work in your player. I had to do this on a firends Sharp portable player. We found three of the six that would play.
Hope this helps Bud |
In addition to trying what Bud said, the problem might be that you don't have "PlayBack Control" (PBC) enabled on your player. This is what allows you to view vcd 2.0 menu information. Many players have a "PBC" button (or "Menu","Title" or some other name) on their remotes that lets you toggle this functionality on and off (though why anyone would want it off, I don't know). See if your remote has any of these types of keys and also take a look through any onscreen setup menus your player might have. Glancing through your owner's-manual for any of these keywords might also be helpful. :wink:
Or it may simply be the case that your player (btw, what kind is it?) doesn't like some of the kvcd templates. :cry: For your sake, I hope not! :) Regards, -d&c |
My player is a Legacy LDVD35 (mobile). I tried looking through the menus and it doesn't have such a feature but I did notice that when I insert other vcd discs that it shows on screen that PBC is on.
I tried playing the compatability disc again and pressing 1, 2 ,3 ....on the remote but it still wouldn't play. It just ejects it after a few minutes. Just curious tho, when burning the disc do you need to finallize/close the disc? |
Quote:
-kwag |
Quote:
From these 2 screen shots, what options do I choose?? And what check boxes do I check?? |
:?:
|
NONE 8O
You're supposed to use "Burn image..." from Nero's menu :!: -kwag |
Ok, I ditched trying to burn it w/Nero and did it with the .toc/.bin file with VCDeasy.
Disc works fine on my computer (playing it as a VCD), but when I put it n the mobile player it does not recognize it and displays "No Disc" on the screen. :cry: :?: :?: So confused. |
Quote:
-kwag |
Quote:
|
Just went back and decided to try and playing the test cd again and it worked :?: :?:
Seems like my player only likes the 1st three options :cry: 4 and 5 have jumpy video and 6 is all pixelie Darn :!: |
Quote:
-kwag |
Quote:
File>burn image> select .nrg file> options box pops up |
Quote:
-kwag |
Quote:
Quote:
Heres' what my Compatibility Test results were: Code:
kvcd-ulbr =PASSED Code:
kvcd-352x480 PLUS = change framerate from 23.976 to 29.97fps in template -d&c |
I will give that a try D&C.
Where do you change those settings within the template?? What did you use as your "Video arrange method"? I'm using Nero version OEM 5.0.2.4 |
Quote:
Quote:
Everything else, you'd do the same as you did before following the Guides. You'd click on the "Advanced" Tab and set "Source Apsect Ratio" to whatever your source-material's aspect ratio is. And if you're using Sansgrip's GripCrop/Gripsize/Gripborders lines in your Avisynth script, you'd set the "Video Arrange Method" to "Center". If you're using the latest TMPG 2.510, you should also click on the "GOP Structure" Tab and make sure "Detect Scene Change" is Un-checked. There seems to be a bug in the latest version of TMPG that always selects this option. That's it! Just follow the guides....and good luck. Once again, these changes aren't guaranteed to work with your player, but hopefully they will. :wink: As a last resort, you could also try using MPEG-2 instead of MPEG-1 with those templates that don't work on your player and see if those will play. But MPEG-1 looks better @ low bitrates less than 2500kbps. -d&c |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.