Testing blank DVD before burning?
I've had a batch of DVD-R that do not burn - error code that the burn was not successful. Are there programs to allow testing of DVD quality before trying to burn?
|
No. DVD have to be burned or pressed to be tested.
If none of them burn, it could be an indication of the DVD burned dying. Or possibly a compatibility issue. What is the media ID and brand of the disc. (Give both.) |
Problem was burning speed
The discs were Verbatim. After a lot of trying, I reduced the burn speed to 4x and have no further problems. Thanks for getting back to me.
|
I still would like to know the media.
Verbatim brand now uses some low-end CMC junk, and not just the quality Mitsubishi discs from their parent company. |
Verbatim
All I can tell you is that these were Verbatim 4.7, 16x speed, AZO DVD-R that I got from Amazon.
|
Anything on the packaging, such as a part number or where they were made?
Can you check the Manufacturer ID on the discs? DVD Identifier or Nero Media Info are a couple free tools that can give that information. I have some Verbatim DataLifePlusDVD+R DL, P/N 98319, that are labeled as "made in United Arab Emirates" with a MKM003 media ID. |
DVD Info
Mfg. is Mitsubishi Chemical Co. ID is 03RG20
|
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.