Go Back    Forum > Digital Video > Video Hardware Repair

Reply
 
LinkBack Thread Tools
  #1  
11-28-2015, 12:13 PM
Sparx Sparx is offline
Free Member
 
Join Date: Nov 2015
Location: Kendal, Cumbria
Posts: 25
Thanked 2 Times in 2 Posts
Hello all,

I have just purchased a Panasonic NV-HS 1000 off ebay, basically I opened it to give the heads a clean before I started and this is what I was presented with. The pinch roller was barely on. when when I gave it the smallest clean it came right off...what appeared to be holding it in place looks to be a piece of plastic tubing that has been cut to size, then crushed at one end; then pushed into place once the roller was "in"

is this normal, or is someone trying to pull a fast one on me!?!?!?!?!?!

also...erm. how do I get this the pinch roller back on?!


Attached Images
File Type: jpg IMG_3721.jpg (46.4 KB, 55 downloads)
Reply With Quote
Someday, 12:01 PM
admin's Avatar
Ads / Sponsors
 
Join Date: ∞
Posts: 42
Thanks: ∞
Thanked 42 Times in 42 Posts
  #2  
11-29-2015, 03:55 AM
Goldwingfahrer's Avatar
Goldwingfahrer Goldwingfahrer is offline
Remembered
 
Join Date: Aug 2013
Location: Switzerland
Posts: 453
Thanked 84 Times in 74 Posts
Pana NV-HS 1000 is identical to the Pana AG 4700 + Loewe OC3800.
There is an identical model of Blaupunkt, name I have forgotten but at the moment.
Service Manual is available here

http://www.digitalfaq.com/forum/vcr-...panasonic.html

Page 82 on the right side
-------------------------
addendum
had to operate brain research ;-)
image 2


Attached Images
File Type: jpg K_Deck_Pana_NV_HS_1000.jpg (91.5 KB, 23 downloads)
File Type: png Elektronik Forum.png (5.9 KB, 16 downloads)
Reply With Quote
  #3  
12-06-2015, 07:20 AM
lordsmurf's Avatar
lordsmurf lordsmurf is online now
Site Staff | Video
 
Join Date: Dec 2002
Posts: 13,509
Thanked 2,449 Times in 2,081 Posts
The seller was either clueless or dishonest. Take your pick. It's eBay, and that happens too often. Time to get a hefty partial refund from the seller, then turn around and get it fixed somewhere. Or return it at their costs. Or use the eBay buyer protection.

If this person sells lots of video hardware, you need to post who this is. This community takes a dim view of eBay con artists, and we spread the word on bad-faith sellers.

- Did my advice help you? Then become a Premium Member and support this site.
- For sale in the marketplace: TBCs, workflows, capture cards, VCRs
Reply With Quote
  #4  
12-06-2015, 10:53 AM
Sparx Sparx is offline
Free Member
 
Join Date: Nov 2015
Location: Kendal, Cumbria
Posts: 25
Thanked 2 Times in 2 Posts
I ended up having to send it back, it doesn't look as though he's sold a VHS before; hopefully he will be more careful if there is a next time!!

I got a full refund + pnp, instead I picked up a JVC HR-S8965 which appeared on ebay a few days later. it's just coming up to room temp now so looking forward to testing it out!
Reply With Quote
  #5  
12-06-2015, 10:58 AM
lordsmurf's Avatar
lordsmurf lordsmurf is online now
Site Staff | Video
 
Join Date: Dec 2002
Posts: 13,509
Thanked 2,449 Times in 2,081 Posts
I have the 7965. The 8965 is nearly identical. That's a nice unit.

- Did my advice help you? Then become a Premium Member and support this site.
- For sale in the marketplace: TBCs, workflows, capture cards, VCRs
Reply With Quote
  #6  
12-07-2015, 03:32 AM
Sparx Sparx is offline
Free Member
 
Join Date: Nov 2015
Location: Kendal, Cumbria
Posts: 25
Thanked 2 Times in 2 Posts
It was thanks to this forum (" VCR Buying Guide (S-VHS, D-VHS, Professional) for restoring video"
that I made the choice, it's like a vhs-bible that page! Very very helpful.
Reply With Quote
The following users thank Sparx for this useful post: lordsmurf (12-07-2015)
  #7  
12-07-2015, 03:36 AM
lordsmurf's Avatar
lordsmurf lordsmurf is online now
Site Staff | Video
 
Join Date: Dec 2002
Posts: 13,509
Thanked 2,449 Times in 2,081 Posts
Quote:
Originally Posted by Sparx View Post
It was thanks to this forum (" VCR Buying Guide (S-VHS, D-VHS, Professional) for restoring video"
that I made the choice, it's like a vhs-bible that page! Very very helpful.
Glad to hear it.

- Did my advice help you? Then become a Premium Member and support this site.
- For sale in the marketplace: TBCs, workflows, capture cards, VCRs
Reply With Quote
  #8  
12-13-2015, 04:26 PM
Sparx Sparx is offline
Free Member
 
Join Date: Nov 2015
Location: Kendal, Cumbria
Posts: 25
Thanked 2 Times in 2 Posts
So i have a very quick question about this 8965.

I think...I love it. I'm not sure

The Panasonic had a "sharpness" feature; this one doesn't seem to have this.
I'm hoping that somebody is about to turn around to me and say that the sharpness isn't needed, because this JVC is putting out such a beautifully raw signal that you can get the same "effect" (if that is all the panasonic was doing?) by sticking the resulting avi file through adobe preimer with a sharpness plug-in turned on....

or something to that effect.

there is no question that the output from this 8965 is far more stable and "clean" than the Panasonic ever was, but the missing "sharpness" feature concerns me. tell me I have nothing to worry about, please!!!

-- merged --

Here's a comparison of the two! It's just hard seeing past the Panasonics stupid purple lines it seemed to be inserting along with it's jaggedness....trying to imagine if they weren't there; would the picture look as "soft" as the JVCs

or as I said earlier, is it not "soft" at all and that is how it is supposed to look!
Only other thing i've noticed with the JVC is that the high frequencys seem to have been dropped out out of the sound, it's slightly more muffled than the Panasonic.

Reply With Quote
  #9  
12-13-2015, 05:48 PM
Goldwingfahrer's Avatar
Goldwingfahrer Goldwingfahrer is offline
Remembered
 
Join Date: Aug 2013
Location: Switzerland
Posts: 453
Thanked 84 Times in 74 Posts
Still try some others Recorder.
Possible that there still can save what with Avisynth / VDub. [Clip Pana]
Switch off at the Pana int.DNR and TBC.....passive..... "AI"=off
Purple lines I see rarely, but at the wrong recorder Lila and green + red dots [spots]
Reply With Quote
  #10  
12-14-2015, 04:39 AM
Sparx Sparx is offline
Free Member
 
Join Date: Nov 2015
Location: Kendal, Cumbria
Posts: 25
Thanked 2 Times in 2 Posts
Here is the full size version, you can't really see the issue very well with that small image :/


Attached Files
File Type: rar panjvc.rar (927.6 KB, 7 downloads)
Reply With Quote
  #11  
12-14-2015, 04:45 PM
Goldwingfahrer's Avatar
Goldwingfahrer Goldwingfahrer is offline
Remembered
 
Join Date: Aug 2013
Location: Switzerland
Posts: 453
Thanked 84 Times in 74 Posts
Excuse me here I would bring both recorder to the Graveyard
Make time with a good recorder a 1-minute recording on a tape from a transmitter station logo of a TV.
see similar in image 1
Then the band playing from the Panasonic.
How the picture looks ???
almost like in Figure 2, right on page 33?

Source image 2 =
Bernd Rodekurth
ISBN 3-7723-6844-1
4.Auflage


Attached Images
File Type: jpg 1.FuBK_testcard_vectorized.svg.jpg (63.9 KB, 16 downloads)
File Type: jpg 2.Fehler 33.jpg (69.0 KB, 10 downloads)
Reply With Quote
  #12  
12-19-2015, 04:50 PM
Quasipal Quasipal is offline
Free Member
 
Join Date: Jul 2014
Location: Herts, UK
Posts: 228
Thanked 98 Times in 76 Posts
Just a comment about the Panasonic roller for future readers (I realise that you sent your machine back). The correct method of holding the roller is via a small white plastic tube, which is friction fit. This splits over time (most of my machines show the start of the crack or split).

The only 'buyable' cure is to order a new roller with the metal part complete - the plastic bit is not available separately. If you have suitable tough tube you can make your own, but that must be secure or it will just drop off as you saw!

As to the sound, JVC machines are more muffled than Panasonic. I don't know why this is - even the HiFi soundtrack is more muffled on the JVC (and the low frequencies are down a bit too). As to picture quality for PAL machines the Panasonic decks do seem better - my experience only.
Reply With Quote
  #13  
12-21-2015, 04:01 AM
Sparx Sparx is offline
Free Member
 
Join Date: Nov 2015
Location: Kendal, Cumbria
Posts: 25
Thanked 2 Times in 2 Posts
Bizzare!

Many thanks for the reply though! I think I'm happy with the player overall so I will be keeping it; it's certainly miles ahead of the standard VHS player I used to have.
Reply With Quote
  #14  
12-26-2015, 07:43 AM
lordsmurf's Avatar
lordsmurf lordsmurf is online now
Site Staff | Video
 
Join Date: Dec 2002
Posts: 13,509
Thanked 2,449 Times in 2,081 Posts
The JVC is not really "soft" in most cases, but it's that the Panasonics have the sharpness artificially pumped up.

Only JVC linear/mono is more muffled. I also have no idea why this happens. The stereo/HiFi on both Panasonic and JVC is fine. In fact, JVC tends to be better, as the Panasonics often distort it from too loud a volume. Again, not sure why. It's just a design flaw, I guess.

- Did my advice help you? Then become a Premium Member and support this site.
- For sale in the marketplace: TBCs, workflows, capture cards, VCRs
Reply With Quote
  #15  
12-26-2015, 09:01 AM
Sparx Sparx is offline
Free Member
 
Join Date: Nov 2015
Location: Kendal, Cumbria
Posts: 25
Thanked 2 Times in 2 Posts
I was hoping you would say something like that, lordsmurf! Loving this jvc!
Reply With Quote
Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Drum speed a little bit fast on a Panasonic AG-W1 VCR. Tracking issue? normende General Discussion 0 09-27-2015 05:39 AM
Panasonic NV-HS960 - sharpness issue hysteriah Video Hardware Repair 8 03-19-2015 08:14 PM
How to change pinch roller on Panasonic NV-HS1000? Mejnour Video Hardware Repair 2 01-04-2015 11:11 AM
Wanted: Panasonic NV-FS 200 or Panasonic NV-HS 1000 in the UK [DONE] sandy Marketplace 1 11-07-2012 01:51 PM
Which S-VHS VCR suggested? Panasonic HS 1000 vs NV-FS200 sangia Capture, Record, Transfer 1 11-12-2011 12:54 PM

Thread Tools



 
All times are GMT -5. The time now is 08:19 AM