Go Back    Forum > Digital Video > Video Hardware Repair

Reply
 
LinkBack Thread Tools
  #1  
02-20-2016, 03:49 PM
jawasmell jawasmell is offline
Free Member
 
Join Date: Feb 2011
Posts: 8
Thanked 1 Time in 1 Post
Hi I have just purchased this vcr with this odd fault. When you plug the unit in, the video head drum spins up and does not stop. Has anyone heard of this problem and how it may be repaired? Thanks.
Reply With Quote
Someday, 12:01 PM
admin's Avatar
Ads / Sponsors
 
Join Date: ∞
Posts: 42
Thanks: ∞
Thanked 42 Times in 42 Posts
  #2  
03-01-2016, 11:57 PM
lordsmurf's Avatar
lordsmurf lordsmurf is online now
Site Staff | Video
 
Join Date: Dec 2002
Posts: 13,661
Thanked 2,461 Times in 2,093 Posts
Bad caps on Panasonic VCRs make the unit do all kinds of kooky things.

- Did my advice help you? Then become a Premium Member and support this site.
- For sale in the marketplace: TBCs, workflows, capture cards, VCRs
Reply With Quote
  #3  
03-02-2016, 02:33 PM
jawasmell jawasmell is offline
Free Member
 
Join Date: Feb 2011
Posts: 8
Thanked 1 Time in 1 Post
Finally managed to fix it, stripped down again removed every ribbon cable to clean the contacts removed the front display dioxit was used on the switches capacitors checked all good on front panel, suspect solder joints were repaired. Power supply caps replaced and all bad solder joints repaired. 9 out 0f 15 of the caps were reading high esr. So now she is working well. but because of all that I cannot say for sure what the problem was but its results that count. Right? Thanks for your help everyone.


Attached Images
File Type: jpg 1.jpg (118.9 KB, 29 downloads)
File Type: jpg 2.jpg (90.4 KB, 28 downloads)
File Type: jpg board internals 1.jpg (78.2 KB, 31 downloads)
File Type: jpg board internals 2.jpg (98.5 KB, 25 downloads)
File Type: jpg underneather the machanism.jpg (97.4 KB, 31 downloads)
File Type: jpg power supply.jpg (81.6 KB, 42 downloads)
Reply With Quote
Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Panasonic AG-1980 head-switching noise on top of image? premiumcapture Video Hardware Repair 25 06-04-2017 04:28 PM
Drum speed a little bit fast on a Panasonic AG-W1 VCR. Tracking issue? normende General Discussion 0 09-27-2015 05:39 AM
Panasonic NV-HS1000 VCR does not operate? Berryscope Video Hardware Repair 2 03-15-2015 05:23 PM
Panasonic AG-5700E vs Panasonic NV-HS1000 for transferring tapes? tsakodim Capture, Record, Transfer 8 12-31-2014 10:00 AM
Problem with JVC HR-S9600U, drum seem to be inactive! Mejnour Capture, Record, Transfer 5 02-17-2012 12:30 PM




 
All times are GMT -5. The time now is 09:32 AM