Fairlight CVI and framemeister sync problems?
 

Hello.
i hope its ok to post this question here ..
i have this problem ..
https://www.youtube.com/watch?v=mr9W...2RfLav7h-U3pPg

im trying to output RGBs from a fairlight cvi into a framemeister and capture it with a PC. Fairlight RGBs > Framemeister > Gamecaptur > pc
when the fairlight is working standalone (with no external video going in to it) it works great and i can capture beautiful crisp footage from the Fairlight but when i feed the fairlight with any external video (from VCR or PC) the output footage jumps all around as it has some sync problems (i assume)
now the problem is not with the fairlight because when i output the fairlight RGBs to a CRT monitor everything works great
also when i output a composite video from the fairlight into the framemeister all is good but i want to use the RGB as it looks much better!

i attached the FairlightCVI specs if it helps in any way
im trying to find a solution for this problem for a few years now with no success .. any help would be much appreciated
thank you

Couldn't be a simpler and better way to capture RGB other than those bulky equipment?
It looks like a frame rate problem, Is that framemeister device frameware up-gradable?

tnx for the replay.
not that i know of :hmm:
the framemeister is with the newest firmware .. if thats what you meant ..

Try feeding it footage from the live output of a camcorder. Something tells me this device doesn't like unstable output from VCRs. PC output can't always be trusted either. For something like this you usually need a genlockable TBC to synchronize on the inputs since its an analog mixer. Looks like this device is similar to the Video Toaster in that it gets its signal timing from the 1st composite input and every other source needs to be genlocked to that signal as well.

Hey thank you for the help
What eventually worked was
feeding the fairlight with composite from pc but using the loop thrugh output as sync thru a sync separator and the RGB from RGB output ..
im so happy :yahoo1:

Seems......convoluted, but it works. Wonder if the composite sync output on the back of the unit is broken? Also surprised that the Framemeister couldn't directly accept composite video as a sync source.