Hwo to connect Panasonic FS200 to EH55 DVD recorder?
Hello
I need a help how to connect properly for record vhs to dvd from panasonic nv fs200 to the dvd recorder panasonic eh-55 On the back of the fs200 there are 2 scarts Then there is av3 svideo in and out Cannot make it work how to show the signal On the back of the dvd recorder there is av1 out and av4 in And on front of it Av3 in How i can connect everything properly to show and record the signal on the disc? |
Is it this or this on you have?
Normall it should just be to connect the S-Video output from the NV-FS200 to one of the S-Video inputs on the dvd-recoder. You can use either the front or back one. Then select the the same input on the dvd-recorder. Note that the dvd-recorder will turn off the output if there is no input, so you have to play back something on the FS200 to get any signal from the outputs of the dvd-recorder. It's also possible to use the scart inputs, though then you have to make sure to set both the vcr and dvd-recorder to use s-video on the scart input/output you are using. |
Yea
Quote:
Now i make it works thanks But talking about quality is not so good The eh55 make some lpixels The elegato video capture connected with svideo to fs200 is far way more better Maybe i should use the jvc dr-10 as encoding? |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.