digitalFAQ.com Forum

digitalFAQ.com Forum (https://www.digitalfaq.com/forum/)
-   Restore, Filter, Improve Quality (https://www.digitalfaq.com/forum/video-restore/)
-   -   AVT-8710 vs 1T-TBC vs TBC-1000 (TBC-100) (https://www.digitalfaq.com/forum/video-restore/1995-avt-8710-vs.html)

monks19 04-15-2012 12:22 AM

The best, I think, would be for you to post some photos of your TBC & post them on this page so we can see them.

Cyclone82 04-15-2012 12:54 AM

1 Attachment(s)
They are not mine and they are photos given to me by someone so will have to ask him for permission. But its pretty basic. See the orange board in the photos above, well that is totally missing and instead that 3 legged tansistor type thing is mounted where that spare space is on the TBC100 board. Power is input to the TBC100 board in that little clear/white connector next to the molex connector for PC use.

I plan to buy a TBC1000 this week. Will be interesting to see what version i get.

Here this explains it.

Also i have seen some with the RCA nd S-video connectors on the internal TBC100 board reomved and some with them still in place.

Could not add photo to above post for some reason
http://i1105.photobucket.com/albums/...tversion-1.jpg

Would like to see the BNC connector mod mentioned by another member earlier in the thread too.

Attachment 2525

juhok 08-09-2012 07:05 AM

3 Attachment(s)
Here's my take on the TBC-1000 mod. I could've made it prettier but it's for work, not for show. :)

juhok 08-29-2012 02:24 PM

1 Attachment(s)
Attachment 2878

WIP

I got a new converter/TBC on the way so I went crazy on TBC-100 board. BNCs made a big difference compared to crappy DIN4/S-video connectors I used before. After modding is ready I probably will sell it if anyone is interested.

juhok 09-10-2012 03:24 PM

2 Attachment(s)
Final version. Had to insulate the BNCs because of Y/C - composite detection logic. Only 1 of 6 would've needed the insulation but meh. What's done is done. Also added separate ferrite cores for both Y/C in and out. TBC-100 board will pick up a lot of noise without the ferrites so I recommend every modder to keep the original or buy new ones. Cable used is RG174A.

Attachment 2892
Attachment 2893

Springsteen85 11-12-2012 02:17 AM

Sorry, I did not understand which of the 4 is better:
- Cypress / TVOne 1T-TBC
- AVToolbox / TVOne AVT-8710
- Datavideo TBC-100
- Cypress CTB-100
I have forgotten anyone?
There are cheaper?

fritolays 07-15-2016 09:27 AM

Howdy friends,

Looking for a bit more info...

What is the actual pinout for the TBC-1000 svideo & composite input/outputs ?

Going from svideo female http://www.digitalfaq.com/forum/imag.../ABVJFZK-1.gif to 4pin cd/audio plug http://www.digitalfaq.com/forum/imag.../ozstrDW-1.gif
SVideo -----------------------------------> 4pin plug
pin 1 - Ground Y ------------------------> pin # ?
pin 2 - Ground C -----------------------> pin # ?
pin 3 - Y - Intensity (Luminance) ----> pin # ?
pin 4 - C - Color (Chrominance) -----> pin # ?

And RCA female http://www.digitalfaq.com/forum/imag.../h0yo3TH-1.gif to 2pin IDC plug http://www.digitalfaq.com/forum/imag.../ub25hV3-1.gif
RCA -------------------> 2pin plug
Signal ----------------> pin # ?
Ground ---------------> pin # ?

Just wanted to confirm before I order the cables, thanks kindly,

glazuna 04-10-2017 01:45 PM

Quote:

Originally Posted by Bugs.Bunny (Post 14685)
Got my TBC-1000 and as promised here are the images:

Attachment 1303
Attachment 1304

Higher res shots:
http://img155.imageshack.us/img155/8991/tbc10001.jpg
http://img715.imageshack.us/img715/8819/tbc10002.jpg

Also got a Panasonic NV-HS 1000 and I am quite happy with the quality.
Was not very happy with my JVC HR S8960E I bought new years ago. (DNR leaves artifacts sometimes).
Only thing that's still left on my to do list is exchange the ADVC 110 to a Backmagic Intensity Shuttle well and probably do the TBC-1000 mod as well.


Mine seems to have the connectors already on the TBC-100 and even says DataVideo TBC-100 on the board...

http://www.digitalfaq.com/forum/imag...10144810-1.jpg

http://www.digitalfaq.com/forum/imag...10144810-1.jpg

JohnnyBravo99 02-08-2018 08:10 PM

Do you still have any of these modded cables for sale?

mikewren 03-11-2019 07:53 PM

1 Attachment(s)
Stumbled on a tvONE 1T-TBC from Adorama on "closeout" for a shade over $500 delivered. Despite the warns from LS about the different version logic boards wearing the 1T-TBC badge, figured I would take a shot at this and return within the 30 day window if it doesn't fit my needs.

Below is the logic board - quite a bit different layout from the board on the first page of this thread.

It passes video as expected when a tape is playing in my JVC HR-S9900, but when the VCR's default blue screen is displayed, the 1T-TBC shows a vertical scroll when watching in VirtualDub through an ATI AIW 7500.

lordsmurf 03-11-2019 08:44 PM

Quote:

Originally Posted by mikewren (Post 59990)
JVC HR-S9900, but when the VCR's default blue screen is displayed, the 1T-TBC shows a vertical scroll when watching in VirtualDub through an ATI AIW 7500.

That is a bad unit. It has frame sticking/ghosting/etc, flawed chips. It will do this during tape playback, not only during a VCR blue screen. There are good 1T units that are essentially AVT-8710 clones, but those are not easy to locate, as those are about 15 years old. The bad unit at only 5-10 old, and more in circulation, with the main reason being these are flawed junk.

At this moment, I do have some good 1T's in the marketplace. But that won't last long.

mikewren 03-11-2019 09:08 PM

Thanks - I did a bit more digging around the forums and found this thread:

http://www.digitalfaq.com/forum/vide...me-base-7.html

Which goes into further detail on the issues with more recent revisions of the 1T-TBC.

Printing the return label now!

Surly_Hotdog 12-01-2020 03:40 PM

Is there a way to know by serial number if a 1T-TBC is one of the newer models with issues?

Tuco 12-02-2020 07:10 AM

In my honest opinion, no. Its been a while since I've touched mine(early one) as I've had better success with other devices but I doubt things have changed in the years since I tried and opened several of them. If I am wrong, then someone here please correct me but as far as I know there is no "good serial number" list. I doubt they have changed anything with regards to the chipset.

I will let others chime in as I have been absent from this forum for quite a while but I've fiddled with enough of them to know it just isn't worth it unless you have a guarantee to try it and return it. You need one of the really early ones to get lucky and even those putter out every now and then..just the way it goes with tape. I got through digitizing my collection using various devices depending on the source. Unfortunately one size fits all doesn't really work in this business.

Again, this is just my own experience and opinion. My collection was done a few years ago so things may have changed but I'm still skeptical.

I wish you luck though. Feel free to ask any questions here.

lordsmurf 12-02-2020 07:42 AM

Quote:

Originally Posted by Surly_Hotdog (Post 73136)
Is there a way to know by serial number if a 1T-TBC is one of the newer models with issues?

Not exactly.

There are "questionable" (gambling) serials, and "definitely bad" serials. There's no "good" list.

For example, right now on eBay, are bad units with the 223834xxxxxx range. Those are worthless flawed units. The "4 sold" means that 4 people have pissed away $500+ on a faulty TBC. The bad chips actually caused dropped frames, the exact reason why TBCs exist!

The real test involve ... well, tests! :P And looking at the board chips.

BTW, if you want one of these, I have an extra that I'll be listing in the marketplace soon. I'm currently rotating and downsizing some of my holdings. So some minty TBCs and capture cards will soon be available!

Quote:

Originally Posted by Tuco (Post 73142)
You need one of the really early ones to get lucky and even those putter out every now and then..

That's exactly correct. Nothing has changed, nothing will ever change on these.

And welcome back, good to see you here again. :)

Surly_Hotdog 12-02-2020 08:38 AM

Thank you both! I am going to avoid eBay if I can. I got lucky with a decent deck but everything else on eBay seems so sketchy....

I'll keep watch for your post Lord Smurf, I am in need of a TBC and capture card I can trust....

latreche34 12-02-2020 12:44 PM

What is that output board that has been removed in the mod, what does it do originally?

ehbowen 12-03-2020 01:35 AM

Quote:

Originally Posted by latreche34 (Post 73152)
What is that output board that has been removed in the mod, what does it do originally?

If I'm Not Mistaken, that's the distribution amp board and outputs. It takes the signal from the TBC and amplifies and splits it into four identical signals. Very useful if you wish to, say, use a single source VCR to dub four copies of a church service or similar on four target VCRs, but essentially useless if you're just using the TBC to a single capture device.

lordsmurf 12-03-2020 01:49 AM

Quote:

Originally Posted by latreche34 (Post 73152)
What is that output board that has been removed in the mod, what does it do originally?

Do you refer to the power board, or the VP299 distro amp?

latreche34 12-03-2020 02:28 AM

Well what each board does and why removing them is better?


All times are GMT -5. The time now is 09:17 PM

Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.