A Cooler AV Toolbox TBC! (custom cooling mods!)
3 Attachment(s)
After reading about some AV Toolbox units getting hot, (I'm a big fanatic about keeping everything cool!),I was using a laptop cooler under the unit, until I found this one at my local PC shop. I removed the installed top wire-mesh screen that it comes with, for maximum air-flow...Just hope the close proximity of the cooler fan/magnets to the AV Toolbox doesn't introduce any video noise?...In past use it didn't seem to be a problem. And it is USB powered.Attachment 4362
Attachment 4363 Attachment 4364 |
Without good cooling, the AVT-8710 overheats in a bout 6 hours (one EP tape worth), and weird stuff starts to happens. The chips on the DataVideo TBCs never did this.
My cooling mod was to attach a small bit of removable cooling tape and a filed-down heatsink. Yours is a bulking solution, but probably cooler yet. :cool: ... just hope it doesn't emit too much fan noise. I need absolute quiet when working with audio (for restoration). |
This particular cooler fan is real quiet! don't even notice it.
|
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.