KVCD: Help with Multiplex!?
 

Alright, When I try to Multiplex the video and audio. When I click on browse for Audio and open the MP2 it says "Illegal MPEG Audiostream". What did I do wrong? Any Help??

Re: Help with Multiplex!
 

How did you encode the audio :?:
With what tool :?:

-kwag

I used BeSweet. Im following this guys guide and his steps are:

a. open besweet
b. On input, select the wav
c. Check ?use MPA decoder? and ?downcovert sample rate?
d. On the output drop down menu, select MP2
e. I usually use 128 kb/s so click on copy command to clipboard, then open the command prompt, paste the command and edit the ?b? parameter to 128 and press enter
f. You should get a MP2 sound file

I do all of the steps except step E. I dont understand what he is telling me to do? If you could give me your steps that would be great!

This guy is slow and never saw that you can change the bitrate directly in the GUI (tab "2lame") so he edit manually the command line generated :-)

What? So what do i gotta do to fix my audio?

Don't know because if you really did that, the result should be okay.

can you copy the command line to the clipboard (there is a button on the GUI for that) and paste it here please ?

"C:\Program Files\Joey\BeSweet 1\BeSweet.exe" -core( -input "C:\Program Files\Joey\Movies\King Arthur\King Arthur.wav" -output "C:\Program Files\Joey\MPG's\King Arthur.mp2" -logfilea "C:\Program Files\Joey\BeSweet 1\BeSweet.log" ) -ssrc( --rate 44100 ) -toolame( -m s -b 128 -e )

There ya go...

And the section of log file of your encoded mp2?

what? Im new to all the KVCD stuff. Just last week I started to make VCDs and now Im trying to get into the KVCDs so sorry if Im going slow. but what file do you want now?

I confirm that all is okay, so show us the log file as Pro already asked.

That is this file : C:\Program Files\Joey\BeSweet 1\BeSweet.log

But please, just post the part that concern this encoding if there is more than this in the file.

C:\Program Files\Joey\BeSweet 1\BeSweet.log

But only the section related to your mp2. Or better delete it and do wav to mp2 convertion again. Then open log file copy test and post it here.

Logging start : 07/26/04 , 18:18:46.

C:\Program Files\Joey\BeSweet 1\BeSweet.exe -core( -input C:\Program Files\Joey\Movies\King Arthur\King Arthur.wav -output C:\Program Files\Joey\MPG's\King Arthur.mp2 -logfilea C:\Program Files\Joey\BeSweet 1\BeSweet.log ) -ssrc( --rate 44100 ) -toolame( -m s -b 128 -e )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : C:\Program Files\Joey\Movies\King Arthur\King Arthur.wav
[00:00:00:000] | Output: C:\Program Files\Joey\MPG's\King Arthur.mp2
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] +------ Shibatch -----
[00:00:00:000] | Source Sample-Rate: 24.0KHz
[00:00:00:000] | Dest. Sample-Rate: 44.1KHz
[00:00:00:000] | Attenuation : 0.0db
[00:00:00:000] +-------- LAME -------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | MP3 bitrate : 128
[00:00:00:000] | Channels Mode : Joint Stereo
[00:00:00:000] | Error Protection: No
[00:00:00:000] +---------------------
[01:56:51:600] Conversion Completed !
[01:56:51:600] Actual Avg. Bitrate : 127kbps
[00:23:14:000] <-- Transcoding Duration
Logging ends : 07/26/04 , 18:42:00.

There it is, Thanks!

You did nothing wrong. Your source is the guilty. Besweet can't handle that correctly.

You must do the samplerate convertion manually with SSRC. DO you know how to use it ?
Or you can do that with tmpgenc also (he can outpout wav ! Look into the "File" menu).

hmm im lost. haha. If you could just give me step by step on what I need to do from here on out. Thanks! :lol:

When you open Besweet gui you can see at the right several tabs or buttons. Press on 2lame and check following boxes:
SampleRate and in box beside write 48
Encoding Mode and in pulldown box select dual channel
Total Bitrate and in box beside write 128
Add Error Protection
Engine, I prefer mp2enc, but others toolame. Some encodings will be bad with toolame and not with mp2enc. It is up to you.
Encode again and I think that it will be ok.

Thank you much for the help. Hopefully it will work this time! THANKS!

Pro, the problem is not in the output samplerate. It is in the SOURCE one !

Besweet can't handle exotic samplerates in entry. 24 Khz is exotic :-)

@JoJoFunyan
Open tmpgenc, load the original source (I guess this is an avi) as video source; It should appear also in the "audio" source (Else you won't be abble to handle it this way :-()
No go in the 'file' menu and select "output to file -> wav file". Put the name of the wav file you want and select "PCM, 44,100 kHz; 16 bits; Stereo" as output Type. Click on "Save".

It should (I hope !) generate a wav in 44.1Khz and not 24Khz. And besweet will convert it with no problem.

Well I did what prodater said and It seems to be working now. My only question is in TMPGenc when I multiplex, For the type what do I want it on? I selected MPEG-1 Video CD(not standard). Does that work? Thanks!

Pro, you should buy a loto ticket :-). It seems that as 24 is half 48 then this work where 44.1 does not :-P.

Yes it is ! (if you encoded in MPEG1 of course).

Great, Thanks for all the help guys!!