digitalFAQ.com Forums [Archives]
Page 8 of 9 « First 34567 8 9
Show 40 post(s) from this thread on one page

digitalFAQ.com Forums [Archives] (http://www.digitalfaq.com/archives/)
-   Video Encoding and Conversion (http://www.digitalfaq.com/archives/encode/)
-   -   Paranoia: Bug reports (http://www.digitalfaq.com/archives/encode/13823-paranoia-bug-reports.html)

Prodater64 10-29-2005 10:46 AM
Quote:
Originally Posted by rds_correia
ffvfw MPEG-4?
You should try to make XviD your YV12 main decoder.
Try to uninstall FFdshow and (re)install XviD.
Now see if you still run into problems.
I quit using FFdshow because of some issues just as the one you are complaining but with other tools instead of PARanoia.
Cheers
You have a ffdshow configuration where you can select if you want that ffdshow or xvid manages xvid streams.

incredible 10-29-2005 11:03 AM
No, Rui is almost right.

Do install BESIDE FFdshow xvid, and do set in FFdshows dshow and vfw codec sections "RAW" at off. This forces XVID to be the one to handle RAW YV12 Bitstreams.
Cause if its set to true, the yv12 RAW output of the mpeg2 decoder again will be "filtered".
You also can avoid that by changing in the options how many ffdshow filter instances in the system chain are allowed to be called. I always do set it to one filter call.

Anerboda 10-29-2005 03:30 PM
I uninstalled ffvfw, and that did the trick.

In Vdub it says it is using xvid for decompressing, and the preview in PARanoia is now working. Thanks a lot. :)

What would be the benefits of having ffdshow installed?

I did a major cleanup of codec packs a while ago and I don't want to have anything installed I don't need...

The cleanup was a nightmare, and I had to clean the registry a few times to remove them all. I don't even know if I got them all out. I was only a couple of minutes from a clean install, but right now it looks ok...

-Anerboda

incredible 10-29-2005 09:09 PM
Only three things u need to install manually to your system:

1. Xvid (for XVID and RAW YV12 decoding)
http://www.koepi.org/xvid.shtml

2. FFdshow for the rest (set to NO RAW decoding)
http://www.afterdawn.com/software/vi...rs/ffdshow.cfm

3. Haali Media Splitter (for mp4, mkv and btw. avi also)
http://haali.cs.msu.ru/mkv/

And if needed ...
4. VSfilter for Subs playback (mp4, mkv)
http://www.videohelp.com/tools?tool=589

In regular, Haali Mediasplitter and FFdshows "embedded" subtitle option enabled are enough.


I use these on my HTPC and all works nice.

For shure, if installing WinDVD or NeroDigital etc. ... these also do install/register "their" splittes and decoders, so watch out! ;)



Quote:
What would be the benefits of having ffdshow installed?
The benefit is that youre independant from video- AND audio- codecpacks which do come with separated filters decoders etc. FFdshow is ONE engine which keeps the a/v decoders under control and the supported decoders are easely to handly by just switching off/on.
Also advanced filtering while playback is a nice bonbon.

Prodater64 10-30-2005 04:21 AM
Quote:
Originally Posted by incredible
2. FFdshow for the rest (set to NO RAW decoding)
Sorry, im lost now. Where you disable RAW? (post a pic please)

incredible 10-30-2005 07:52 AM
go into the codec support section of ffdshow, very low is "RAW" and here do uncheck, also in the FFvfv codec support section

Prodater64 10-30-2005 08:01 AM
Quote:
Originally Posted by incredible
go into the codec support section of ffdshow, very low is "RAW" and here do uncheck, also in the FFvfv codec support section
I can't uncheck, but disable.
I don't found FFvfv section.

http://www.digitalfaq.com/archives/i...2005/10/10.png

So hard is for you post a pic?

incredible 10-30-2005 11:11 AM
Look under "Programs", "ffdshow" and there the vfw configuration appliktion

Prodater64 10-30-2005 11:16 AM
Quote:
Originally Posted by incredible
Look under "Programs", "ffdshow" and there the vfw configuration appliktion
Thanks.

incredible 11-02-2005 05:08 PM
Boulder,

what happened to your mjpeg importing issue?
Solved?

I made some tests using diff. encoders and decoders used.
I kept my eye on proper playback and framecount info:

Code:
captured: Picvideo 2.10 mjpeg ---> Decoding: PicVideo 2.10
captured: Picvideo 2.10 mjpeg ---> Decoding: FFdshow
captured: ffdshow mjpeg ---------> Decoding: PicVideo 2.10
captured: ffdshow mjpeg ---------> Decoding: FFdshow

captured: Xvid Quant2 -----------> Decoding: Xvid
captured: 3vix Quant2 -----------> Decoding: 3vix
captured: HuffYUV ---------------> Decoding: HuffYUV
No Problems ..... can you "now" duplicate that? Or still Problems?

Thanx :)

Boulder 11-03-2005 08:46 AM
The image (clip encoded with ffdshow mjpeg) shows in correct size but the framecount is still wrong. The build is from 13.10.2005, built by CelticDruid.

incredible 11-03-2005 09:13 AM
Means you did also let ffdshow mjpeg decoder decode your picVideo streams before?

Means on ONLY mjpeg-avis no matter if decoded by ffdshow or PicVideo or ALSO other types of encoded avis (xvid,3vix, Huffy etc)?

Boulder 11-03-2005 10:27 AM
Quote:
Originally Posted by incredible
Means you did also let ffdshow mjpeg decoder decode your picVideo streams before?
The PicVideo streams had an incorrect framecount when decoded with either PicVideo or ffdshow. When decoded with PicVideo, the image was also shown incorrect although it was detected as 696x576. When decoded with ffdshow, the image was correct.

The ffdshow stream (decoded with ffdshow) shows a correct image but the framecount is still wrong.
Quote:
Means on ONLY mjpeg-avis no matter if decoded by ffdshow or PicVideo or ALSO other types of encoded avis (xvid,3vix, Huffy etc)?
At least DivX5 and XviD appear to be correctly identified.

incredible 11-03-2005 11:02 AM
Hmmmmmm... maybe then a XP issue?! Im on Win2000.
I dont know if there has been a significant change in the vfw API since XP.

incredible 11-05-2005 07:41 PM
New release, watch the changelog :)

Prodater64 11-05-2005 09:18 PM
Quote:
Originally Posted by incredible
New release, watch the changelog :)
Thanks.
OT
When you post an update, could you add the link to the program thread.
It wouldn't be so hard for you and would be useful for us.
Tip: When you post your program thread update, before come here and post the new, copy the link or your first post from the little image on its left top: "http://www.digitalfaq.com/archives/error.gif Posted: Sun 06 Nov, 2005 3:17 am Post subject:"
END OT

incredible 11-05-2005 11:04 PM
Did I catch something wrong?
The Link in the main Appl. Thread is also updated in the same minute I do post the announcement in here.


@Generall

Probably tomorrow I'll release a Version where MUCH more sources are supported, like ... mp4, mkv, wmv.

kwag 11-05-2005 11:09 PM
Get some sleep Andrej :lol:
Great work :cool:

-kwag

Prodater64 11-05-2005 11:41 PM
Quote:
Originally Posted by incredible
Did I catch something wrong?
The Link in the main Appl. Thread is also updated in the same minute I do post the announcement in here.
Nevermind it, the link is in your signature.

:douh:

incredible 11-20-2005 01:42 PM
Update,

watch the changelog. :)


All times are GMT -5. The time now is 02:23 AM  —  vBulletin © Jelsoft Enterprises Ltd
Page 8 of 9 « First 34567 8 9
Show 40 post(s) from this thread on one page

Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.