Success with 1.1.06
 

Just completed my test on the latest version of CQMatic. movie was 105 min, used KVCDx3 528x480 template came up with a total file size of 800,708, CQ was 65.53. Audio was 86,499 (112 Bitrate) video w/o audio was 704,045. See below
http://www.kvcd.net

CQMatic Version 1.1.06
Copyright Softronex Corporation, 2003.
All rights reserved.
Time: 12:01:27 Date: 08/09/2003
Ready!
Project: C:\Sleepy Hollow.tpr

Creating: CQMatic.tpr

C:\HOLLOW\VIDEO_TS\Sleepy Hollow.m1v
Project resolution: 528x480
Execute.
Movie Time: 105
Average Bitrate: 929
Full Encode mode
Executing Prediction Phase...
Process started at 12:01:40
On 08/09/2003
CQ set for prediction
Setting up initial sampling.
Using CQ of 60.00
Prediction cycle #1
Encoder started...
Process time: 3.40 minutes.
Encoder end.
File size difference = 1.105478
Low fence: 60.000000
High fence: 90.000000
Last CQ = 60.00
Current CQ = 66.33
CQ difference = 6.328674
Using CQ of 66.33
Prediction cycle #2
Encoder started...
Process time: 3.27 minutes.
Encoder end.
File size difference = 0.994033
Low fence: 60.000000
High fence: 66.328674
Last CQ = 66.33
Current CQ = 63.16
CQ difference = 3.164337
Using CQ of 63.16
Prediction cycle #3
Encoder started...
Process time: 3.28 minutes.
Encoder end.
File size difference = 1.063723
Low fence: 63.164337
High fence: 66.328674
Last CQ = 63.16
Current CQ = 64.75
CQ difference = 1.582169
Using CQ of 64.75
Prediction cycle #4
Encoder started...
Process time: 3.27 minutes.
Encoder end.
File size difference = 1.012106
Low fence: 64.746506
High fence: 66.328674
Last CQ = 64.75
Current CQ = 65.53
CQ difference = 0.783821
Using CQ of 65.53
Prediction cycle #5
Encoder started...
Process time: 3.25 minutes.
Encoder end.
Encoding set to Full encode.
Full encode start...
CQMatic complete!
Total minutes of process: 16.48
Process ended at 12:18:09
On 08/09/2003

Will try with other templates and resolutions. But if I can get the reuslts I got above, Kwag has done it again.


Bud[/IMG]

Another result of version 1.1.06
 

Just finished encoding my DivX of IceAge with the full MA script :D
Here's the log ;)

Wanted file size by (Moviestacker) : 747,415.65KB
Final encoded file size: 756,344KB
For a difference of +1.18% :D
I would like to say: "Mission accomplished" ;)
:drink: :drink:

Edit: Forgot to mention that I used a MIN bitrate of 300, MAX of 2,500 on this one :!:

-kwag

Ahh finally success
Movie 120 minutes at 704x480
Avg Bitrate 1658

Encode done Wanted File Size: 1,486,543
Encoded File Size: 1,497,569
Accuracy of +.74% 8O 8O :D :D

However the bad news is that when multiplexed it spilt over by 5MB onto a 3rd CD, so Moviestacker is definetly screwy in its file size prediction.

I feel good about prediction now...I just need to work out the kinks on 'Wanted File Size' and leave more buffer room. Especially cause I like to add a simple menu or two which adds 1 or 2MB.

Oh and I tried the bitrate calculator and it came out to the exact avg bitrate as the adjusted time in Moviestacker I came up with (Moviestacker 78mins 35 seconds), using 1Kb = 1000bits, but when I change the Bitrate Calc to 1Kb=1024 it drops my avg bitrate by 39.

Which should I be using? 1Kb = 1024 right?

now is "my time"
:wink:

a few days ago i needed the final size with 290mb cos
i divide the movie in 3 parts.
the full time of the movie is 88 minutes 46 seconds.
the first part have 31 minutes and 22 seconds.
i don't got the perfect CQ to my 290mb target
and i use some differents CQs to test.
first was CQ60...247mb,too short.
CQ65.....303mb,too big.
CQ64.....297mb,too big too.
:arrow: then i encode using CQ63,20 and got 287mb final size. :wink:
and i think:
:arrow: the perfect CQ is between 63,3 to 63,5 for 290mb target!
it was before Kwag start to develop CQMatic.
i try all versions and sometimes the CQ was too big or too short.

a big history,don't?

now the results using CQMatic 1106:
i did the project again....
min 300, max 2500, same source, same script....everything equal :!:

result of my first prediction with CQMatic 1106 and
i send in pm to Kwag this first test,he have this full log(inbox)
i don't have no more...:
:arrow: CQ 63,54
8O
then i think:
what?
perfect!
:D

BUT, to remove doubts i did ALL again cos my movie is 29,97 ntsc:
new project, min 300, max 2500, same source, same script,
reboot the system....everything again.

:arrow: see the log:

http://www.kvcd.net
CQMatic Version 1.1.06
Copyright Softronex Corporation, 2003.
All rights reserved.
Time: 05:43:28 Date: 08/09/2003
Ready!
Project: C:\CQMatic\1106.tpr

Creating: CQMatic.tpr

D:\La Luna\ToK\2\VIDEOKwagPhilpred2.m2v
Project resolution: 480x480
Execute.
Movie Time: 31
Average Bitrate: 1074
Prediction Only mode
Executing Prediction Phase...
Process started at 05:43:44
On 08/09/2003
CQ set for prediction
Setting up initial sampling.
Using CQ of 60.00
Prediction cycle #1
Encoder started...
Process time: 6.75 minutes.
Encoder end.
File size difference = 1.078564
Low fence: 60.000000
High fence: 90.000000
Last CQ = 60.00
Current CQ = 64.71
CQ difference = 4.713860
Using CQ of 64.71
Prediction cycle #2
Encoder started...
Process time: 6.38 minutes.
Encoder end.
File size difference = 0.965298
Low fence: 60.000000
High fence: 64.713860
Last CQ = 64.71
Current CQ = 62.36
CQ difference = 2.356930
Using CQ of 62.36
Prediction cycle #3
Encoder started...
Process time: 6.67 minutes.
Encoder end.
File size difference = 1.076409
Low fence: 62.356930
High fence: 64.713860
Last CQ = 62.36
Current CQ = 63.54
CQ difference = 1.178463
Using CQ of 63.54
Prediction cycle #4
Encoder started...
Process time: 6.47 minutes.
Encoder end.
File size difference = 0.990764
Low fence: 62.356930
High fence: 63.535393
Last CQ = 63.54
Current CQ = 62.95
CQ difference = 0.589233
Using CQ of 62.95
Prediction cycle #5
Encoder started...
Process time: 6.40 minutes.
Encoder end.
File size difference = 1.029363
Low fence: 62.946159
High fence: 63.535393
Last CQ = 62.95
Current CQ = 63.24
CQ difference = 0.294617
Using CQ of 63.24
Prediction cycle #6
Encoder started...
Process time: 6.60 minutes.
Encoder end.
File size difference = 1.008766
Low fence: 63.240776
High fence: 63.535393
Last CQ = 63.24
Current CQ = 63.54
CQ difference = 0.294617
Using CQ of 63.54
Prediction cycle #7
Encoder started...
Process time: 6.05 minutes.
Encoder end.
File size difference = 0.990764
Low fence: 63.240776
High fence: 63.535393
Last CQ = 63.54
Current CQ = 63.39
CQ difference = 0.147308
CQMatic complete!
Total minutes of process: 45.32
Process ended at 06:29:03
On 08/09/2003

:arrow: final CQ63,54 for 290mb target.
IS PERFECT.....TWICE :!:
exact the same result that i need TWICE!
:arrow: no more words.....don't need!

Kwag and all...
CQMaic 1106 version is a pot of gold!


:ole: :encore: :mnkypile: :yippie: :rotf: :umbrella: :team: :cid:

Bad News:

I encoded the Movie "Fulltime - Killer" with a CQ 45,61. I used CQMatic 1104 for the prediction. The Final Size was 735 MB. The Wanted Size was 720 MB.

So I decided to make a prediction with the newest Version 1106. But the Final CQ was only around 40. That CQ is too low.

Bchteam,
how do you choose your 720mb size target?

i have "my way" but want to know how you do it!
:wink:

800 MB - Audio Size ( 80 MB in this Case ) = 720 MB*1024 = 737.280 KB

Just finished another movie
The Replacement Killers 528x480 @ 1 80Min CD
Avg Bitrate = 1092
Movie Length 87min 37 seconds

Wanted Video Size: 717,575
Actual Encoded Video Size: 716,081
Difference -.2% 8O 8O 8O :!: :!:

Wow Hope my accuracy streak continues. Going to try some of my Sex and The City DVDs next. They are hybrid material which use Telecide and Decimate to convert 29fps NTSC to 23fps NTSC..

We'll see how that goes

oh thanks my friend Bchteam,now i see.
i'm stup cos i was thinking that your 720mb
target was for audio and video,not only for video!

:)

my results using CQMatic 1107 here:

http://www.kvcd.net/forum/viewtopic.php?p=38566#38566

8)

That's not bad news at all :!:
That's 2%, and that's tolerable :)
Also, from 40 to 45, you're working on the almost "flat range" of TMPEG, where a large change in CQ barely produces a file size change, so it seems that 40 is really the correct CQ :D

-kwag

You might be right...

I will try the 40 CQ on that Movie today and report the result... :wink:

I must not caught on to any of this, I have a Divx file of 765mb, I tried to use the headac3he-moviestacker-tok way without any luck, I was told that my CQ was off, don't really know how to check what my CQ is other than in tmpegnc.

ok so I have been reading about the name progrma that Kwag has done, now I try to follow Avalon's guide, but he used DVD rips for that, so I have to try to figure out how to go about it with looking around the fiorums to where to start,

I am holding the divx file in one hand and cqmatic in the other a I don't understand how the puzzle works, I have seen where people say they only use tmpegnc and select a kvcd template and it works for them, I find that hard to believe since I have tried different files, some go out of range and others just are way to big, I know that you must compress the files(audio+video) to make all of this work, It sucks to be new and try to walk before I crawled,

When I open Cqmatic and try to open the project what is it I am trying to open?, there must be something before this step to do, and it asks for a TEXT project, is this the script that we made up in the moviestack before?

Can you say lost, I know I can, I can read all whatt everyone is saying but I just can not take it in, is there a simple guide around or maybe in the near future to convert Divx to kvcd using CQmatic?


it seems that alot of people are really using the KVCD that Kwag designed and there is a ton of different ways people are using them, but I like to to the real source for the ones who really know what all is involved in this...

Thanks as always

HeyJoe!!