KCD: TMPGENC has odd colors and ghosted figures?
Hi all,
I dont know if anybody can help me but I am having exreme problems trying to encode a KVCD. I was hoping to recode a ripped second Disc of a DVD that I own but didnt want to put it onto a DVDR. I am currently following REDMANS guide KVCD FROM SCRATCH. All was going fine until I came to do the Video Part. The MovieStacker in the Guide is 1.1.1 and since Ive found out this has now been replaced by a 2.0 Beta version which I have installed. I am new at this and have not been able to encode not one KVCD yet to show for the 7Days I have now been on this. I fear I am about to give up. My problem specificly is that When I create a Script in Movie Stacker and load it into TmpgEnc it greys out and all I can see from the Result is a Grey Screen Interspread with some partial colours in the backround and ghosted figures. I have read the problems in the MovieStacker Forum and applied Some of the changes mentioned there such as turning of a function in TmpEnc and using the Mpeg2Dec2.Dll but none of these has made any difference whatsoever. Can anybody please help. I was so Excited about the concept when I discovered it but now I fear I may have to give it up, too dumb I guess. Anyway enclosed is the Newbie Template as requested in the forum and my Script. Thank you :( SOURCE: - Filetype (divx/xvid/mpeg/mjpg - so what says Gspot??) ? : VOB - interlaced(means combing on fast moving scenes) or not interlaced ? : INTERLACED - Framerate (29.97, 23.976, 25.000) ? : 25.000 - Resolution ? : PAL - Audiosamplerate (44.1 khz, 48 khz)? : 48 khz - Audio Type (AC3, mp3, mp2) ?: AC3 - Is Audio VBR or CBR ? CBR (some answers you get if using Gspot on the source!) DESTINATION: - KVCD, K(S)VCD or KDVD ?: KVCD - Mode (mpeg1 or mpeg2) ?: MPEG1 - Framerate (29.97, 23.976, 25.000) ? : 25.000 - Resolution ? PAL - Audiosamplerate (44.1 khz or 48 khz) ? : 44.1 - Audio Enc Type (mp2, AC3) ?: MP3 - Encoding Appl. (CCE or TmpgEnc) ?: TmpgEnc - muxing Appl. (TmpgEnc, BBmpeg, etc.) ?: BBMpeg - Authoring Appl. (Vcdeasy, VCDgear, Nero) ?: Nero6 - Burning Appl. (Vcdeasy, Nero, etc.) ?: Nero6 If Avisynth is used: - Which Version of Avisynth Do you use? 2.08 - Post your last state of your script here!: #================================================= =====# # -= AviSynth script by MovieStacker v2.0.0 (beta3) =- # #================================================= =====# LoadPlugin("C:\Program Files\MovieStacker\Filters\MPEG2Dec.dll") LoadPlugin("C:\Program Files\MovieStacker\Filters\TomsMoComp.dll") LoadPlugin("C:\Program Files\MovieStacker\Filters\GripFit_preview.dll") LoadPlugin("C:\Program Files\MovieStacker\Filters\LegalClip.dll") LoadPlugin("C:\Program Files\MovieStacker\Filters\Sampler.dll") Mpeg2Source("C:\Documents and Settings\Steve Grant.STEPHEN-GRANT\Desktop\Great Eascape2 recoded\Great Escape Movie2.d2v") LegalClip() TomsMoComp(1, 15, 1) GripCrop(352, 288, overscan=1) GripSize(resizer="BilinearResize") TemporalSmoother(1, 2) MergeChroma(blur(1.58)) MergeLuma(blur(0.2)) GripBorders() LegalClip() Sampler(100, length=24) ## MPEG size = ((Total frames/MovieTimeInMinutes)/24) * MPEG sample file size * .98 ## Steve. |
HI ,first all i can say is don't give up i have tried to get so many people here from ither forums and they all give up because it seems difficult at the start.
If i can get it, anyone can-i have no computer knowledge and just ask here specific questions and get wonderful help I'm sure you will get help from more knowlegeable people but is there a reason you are still using avisynth 2.08 :?: try loading the script into virtual dub or WMP and see if it givs you an error just don't give up man |
You should use Mpeg2Dec3.dll
|
Hi,
I can understand your frustration. I have been there :( and got everything working after going through following setps There are many ways to configure your system for video encoding. Here are the steps I follow. 1. Install and configure you choice of operating system with latest service pack and updates. I use WinXP 2. Install the latest 2.5.X avisynth from www.avisynth.org 3. Install the Gordian Knot Rip and Codec pack. As you are doing KVCD's you can uncheck DivX 5.x and DivX 3.x from Rip pack and also Avisynth as you have already installed. You can download from http://gordianknot.sourceforge.net/ 4. Install the DVD2SVCD and again cancel avisynth installation. You can download from www.dvd2svcd.org 5. Install you choice of encoder (TMPGEnc or CCE) 6. Install the filters as needed. Minimally you need MPEG2DEC or MPEG2DEC3, Undot, STMedian, Asharp, Decomb510, Sampler-2.5, Gripfit. Use DVD2AVI and Besweet from DVD2SVCD. Moviestacker does't give you a script compatiable with Avisynth 2.5.x. You should use Moviestacker only to get resizing parameters and use the same with "Optimal Script" I don't claim the above steps are perfect in all sense. But, they work for me :) |
Thanks peeps but still confused
:? Thanks for the reply's peeps, but I am still in the Dark'. Are you Saying not to use the Guide Now or what then? I have tried the Mpeg2Dec3.Dll as well and this didnt help either. I dont know what is Gordian Knot', Is there instructions how to use that? I have downloaded the tools from the Instructions in the Guide....Recomends Avisynth 2.08 etc as Moviestacker does not apparently recognise 2.5. Can anybody figure out what I am doing wrong if in my scripts at all, from the template I posted.....Oh Dear.
Thanks Steve. |
I have the same if I use DVD2AVI 1.77 and avisynth 2.0 with mpeg2dec. Then use mpeg2dec3 with avisynth 2.5x or DVD2AVI 1.76.
|
If you let mpeg2dec.dll do the original d2v, remove it and redo you yourself with dvd2avi.
|
@Phil
I didn't use for quite long time mpeg2dec, then the things might change. Are you sure that mpeg2dec can create d2v? I ask because I know there is another decoder Mpegdecoder.dll IIRC from Nic (doom9 place) which can do d2v. So I have wonder what is what :) |
Re: Thanks peeps but still confused
Quote:
Quote:
You need to change the following lines of optimal script for avisynth-2.5. You can copy over the lines from Moviestacker.
|
It is not quiet true as nor DVD2SVCD neither GKnot will provide GripFit for Avisynth 2.5x.
|
Quote:
I am sorry for the confusion. |
Thanks members - A few more questions please.
:roll: Hi people,
Thanks for all your reply's they were all gratefully received. The thing is if i can equate myself to the 5 year old when it comes to KVCD, you guys are the adults. Im kind of lost in all the opinions I have received. could anyone please give me some solid step by step directions on other ways to try and encode or adjustments to make to the way I am doing things at the moment. Is there anything wrong with my script I submitted ? Do I have to make any changes there perhaps? Sorry to be so dumb peeps but I am new and this is all kind of like rocket science to me at the moment. I know you guys are very knowledge - able in this area but please bear in mind I am new and dont understand all the concepts and stuff. I am not critisizing, quiet the contrary I am so pleased you people have kindly taken the time to help me, but I was wondering If you could simplify things a bit. For instance where do I go from here and what should I try first Etc. Thanks Peeps, Sorry for being such a dumb ass!! Many thanks, Steve. |
Hi Steve,
Have you tried any of the other guides available on the main page ( www.kvcd.net ) :?: -kwag |
:roll: Hi Kwag,
Yes I have tried some of the other guides, which were very good. Unfortunatly as you can probably see from this post I was using REDMANS Guide but hit problems when it came to encoding the D2V file. I followed it to the letter although the only difference was that I had to replace the 1.1.1 version of MovieStacker with the new 2.0 Beta Version which kind of made things difficult with settings etc. I have had so much good advice from the members but as in everything in life everybody has different ways and means of achieving the goal. As a complete begginer I am finding it mighty confusing trying to A and B together to get answer C if you know what I mean, Hence asking for some solid advice. I have included the Template of my Code as requested and was basicly waiting for any feed back or help from this. This KVCD thing aint as easy as it looks mate. Thanks, Steve. |
Just About all out of ideas
Hi All,
I have been experimenting for the last few days and have taken your comments on board, but I have not been able to get this thing right. I tried using the MovieStacker guide and Avisynth 2.5 after encoding the Vobs from a DVd file to D2V file and AC3 file. I ran my Script in the media viewer and get error entry's in red. It refers to Mpgdec2dec3.dll unable to locate,but I placed this in the Avisynth folder and checked it was there. Enclosed is my script: ## DLL Section ## # LoadPlugin("C:\Filters25\MPEG2Dec3.dll") LoadPlugin("C:\Filters25\GripFit_YV12.dll") LoadPlugin("C:\Filters25\STMedianFilter.dll") LoadPlugin("C:\Filters25\asharp.dll") LoadPlugin("C:\Filters25\unfilter.dll") LoadPlugin("C:\Filters25\undot.dll") # #### ## Main section and static filters ### # Mpeg2Source("Your_D2V_Source_Here") # undot() asharp(1, 4) GripCrop(Your_GripCrop_Parameters_Here) GripSize(resizer="BicubicResize") STMedianFilter(3, 3, 1, 1 ) MergeChroma(blur(1.5)) MergeLuma(blur(0.1)) # # ## Linear Motion Adaptive Filtering ## # # ( Portions from AviSynth's manual ) # This will apply variable temporalsoften # and variable blur. # Both filters are active at all times, and work inversely proportional to the # activity, measured from current frame to next frame. ScriptClip(" nf = YDifferenceToNext()" +chr(13)+ "unfilter( -(fmin(round(nf)*2, 100)), -(fmin(round(nf)*2, 100)) ).TemporalSoften( fmin( round(2/nf), 6), round(1/nf) , round(3/nf) , 1, 1) ") # # # GripBorders() #LetterBox( Your_Values_Here ) # Depends on situation. Use MovieStacker! # # ## Functions ### function fmin( int f1, int f2) { return ( f1<f2 ) ? f1 : f2 } Mpeg2Source("C:\Documents and Settings\Steve Grant.STEPHEN-GRANT\Desktop\DVD2KVCD Encode\The Great Escape Disc2.d2v") GripCrop(704, 576, source_anamorphic=false) GripSize(resizer="BilinearResize") GripBorders() I am getting very frustrated with this now as I even tried the automated programs and they would only include one of the short films from the folder not the other or the Photo's included. I havnt been able to make one KVCD now its been a while since I started this and Im getting no where. I intended to encode the video/DVd on the LBR template as the DVd is 2Hrs 10Mins long complete. Am I right choosing this Template or could I use something else? I have no idea. Any help would be most appreciated. Thanks :( , Steve. |
amendment
:oops:
Sorry that should read KWAG's Script Template which I used from the site, Thanks KWAG, Steve. |
Your script is wrong :!:
Look at this: Mpeg2Source("Your_D2V_Source_Here") You have to edit that line, and there's where you put the source to your .d2v. Also this line: GripCrop(Your_GripCrop_Parameters_Here) And this one: #LetterBox( Your_Values_Here ) # Depends on situation. Use MovieStacker! Not at the bottom of the script where you added the lines : Code:
Mpeg2Source("C:\Documents and Settings\Steve Grant.STEPHEN-GRANT\Desktop\DVD2KVCD Encode\The Great Escape Disc2.d2v") |
Hi KWAG,
Thanks for the reply although sorry to be a dummy, I dont understand what you are saying. In the source line thats were the file is :? Not quite with it about the rest. Where do I find the values to input there?? Thanks, Steve. |
Quote:
[quote] Quote:
Also if you are using cq matic i think you might want to shorten that source line that thing is huge :D |
Totally Lost
Hi Bigggt,
I have tried what I have seen previously. When I try to load the Script into media player, red writing comes along the top of the screen saying various .dll's wont load. these change as I change the sript so they are different all the time. When I load this script into TMPGEnc it just comes up with a distorted Red writing along the screen and doesn't even load the video. I dont understand the whole thing. I have tried using the guides but they are out of date and use different tools no longer available. This Is why I am asking all these questions. I have been at this for ages now and cant get the system to work, I dont know what to do next. I might as well pack this in I cant understand all this script stuff. Thanks for the reply though. :? Steve. PS. It would be Ideal For Newbie's to have a Sample Script to work from to understand the settings etc. |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.