Best setting for Source Aspect Ratio in TMPGEnc?
i'm quite new to kvcd and have a short question concerning the source aspect ratio.
in the beginning i thought tmpg would handle this correctly itself, since the output looked fine, when i used x>y resolutions like 352x288 in my avs-script. in this case tmpg set the source aspect ratio to 4:3 625 lines (pal, 704x576). but when i tried 352x576 tmpg set the source aspect ratio to 4:3 display and the output was horizontally streched/vertically crushed. so, what do i have to set in tmpg's advanced options? is the source aspect ratio correct but something else needs to be changed? or is there anything wrong in the script? many, many thanks in advance! b >>> newbie template... 8) SOURCE: - Filetype (divx/xvid/mpeg/mjpg - so what says Gspot??) ? : dvd - interlaced(means combing on fast moving scenes) or not interlaced ? : not - Framerate (29.97, 23.976, 25.000) ? : 25 - Resolution ? : probably 720x576..!? - Audiosamplerate (44.1 khz, 48 khz)? : 48 - Audio Type (AC3, mp3, mp2) ?: ac3 - Is Audio VBR or CBR ? cbr (some answers you get if using Gspot on the source!) DESTINATION: - KVCD, K(S)VCD or KDVD ?: kvcd - Mode (mpeg1 or mpeg2) ?: mpeg1 - Framerate (29.97, 23.976, 25.000) ? : 25 - Resolution ? 352x576 - Audiosamplerate (44.1 khz or 48 khz) ? : 48 - Audio Enc Type (mp2, AC3) ?: mp2 - Encoding Appl. (CCE or TmpgEnc) ?: tmpg - muxing Appl. (TmpgEnc, BBmpeg, etc.) ?: bb - Authoring Appl. (Vcdeasy, VCDgear, Nero) ?: vcdeasy - Burning Appl. (Vcdeasy, Nero, etc.) ?: nero If Avisynth is used: - Which Version of Avisynth Do you use? 2.54 - Post your last state of your script here!: Quote:
|
Re: Question concerning "Source Aspect Ratio"...
Quote:
What did you use to display your encoded mpeg file :?: If you used WMP, that's probably why it didn't display correctly. Try previewing with WinDVD or PowerDVD Edit: Also, make sure you encoded with input aspect set to "Full Screen". AviSynth (GripFit) will take care of the correct input resizing. -kwag |
thanks for the quick reply, kwag!
quick kwag... hehe :mrgreen: i'm using the latest version of gabest's media player classic. but my main concern is that it looks that strange on tv... have to go to bed now, cause it's 6 o'clock in the morning over here. edit ok, i'll check that full screen option later today. didn't read about that in any of the guides i saw..!? |
ok, full screen solved the problem. thanks again!
three questions to clarify...
1. load the avs 2. load the template 3. settings 4. gop structure... check output bitstream for edit (closed gop) 5. advanced... video arrange method: full scream 6. video... set cq edit I guess by... Quote:
|
Always load the template and then the avs file. Let avisynth handle resizing.
|
thanks for the hint, kev! but are you sure about that?
red-m does it the other way round... http://www.kvcd.net/guides/kguide/kvcdguide.htm |
Quote:
|
ah, i see...
any comments to the three questions (especially the third) in my second last post? i'd really appreciate your help! |
Quote:
2 - Open template. 3 - Open your avs. 4 - Check don't change resolution in status bar. If change, fix your avs. 5 - Settings. If you downloaded template from kvcd.net, only check if you are using kvcd notch matrix (configure - quantize matrix tab, check last values for intrablock, non-intrablock, it should be 79 and 44 respectively.) If not you must to write correct values there . 6 - You only have to change an unique value. This is in configure - video tab - rate control mode - settings - quality. This is the CQ value, adjust it according with prediction, to fill your movie in your media. 7 - KVCD Official Specifications recommend that don't close gop. Code:
K Video Compression Dynamics (KVCD) Official Specifications |
Quote:
video arrange method: full screen Quote:
|
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.