My next project!
I think this is what I'm going to install next week :mrgreen:
http://www.mythtv.org/modules.php?name=MythFeatures http://www.mythtv.org/ -kwag |
That looks great but it's only for Linux platform right?
ren |
Quote:
Yes it's only for Linux. But I wouldn't want to run something like that on Windows :!: Imagine, you're in the middle of a recording, and CRASH :mrgreen: Then, you'll be :banghead: all night :lol: -kwag |
I'm seriously considering switching to Linux but will I still be able to encode and burn KVCD's? I really want that PVR setup :D
|
Quote:
You can do something better :idea: Because MythTV runs on Linux, you can run "Samba" on the Linux machine ( http://us1.samba.org/samba/samba.html ), and connect your Windows machine to the linux machine, either directly, or better yet, through a small hub. This way, you'll have a small network. Now you can access the drive on the Linux machine from the Windows machine as a network drive :D So you can just copy your encoded/captured MPEG files from Linux to Windows, and encode them to KVCD on your WIN box. It opens up a lot of possibilities :cool: And yes, I want that setup too :mrgreen: -kwag |
Hello kwag:
First of all, let me just say that I know nothing about Linux :oops: I guess that I need to read a lot about linux, as someone suggested. Ok, now that I have that out of the way :) , let me ask a question: As you perhaps have gathered by some of my posts, I have downloaded the Linux Cd, and my idea was to use this Linux CD to run the OS, and then save the files in drive D, which is a partition drive, can I do that? or, can I save the Linux files on my external e drive? If the answer is yes, then can I acces such files from drive c:? Thanks for the help Totonho03 |
Linux is abble to see (we call that "mount") any windows disk, either formated in FAT32 or NTFS.
So you can write you files from linux directly on you disc C, or D or E, and even on your windows directory if you want. |
Hi Dialhot:
Quote:
Code:
So you can just copy your encoded/captured MPEG files from Linux to Windows, and encode them to KVCD on your WIN box. Thank you Totonho03 |
Quote:
This way, Linux can read/write your "data" drive, and so can Windows. If you format that partition from Linux as EXT2/EXT3, XFS, JFS, or any other format supported by Linux, then you'll only be able to mount (read/write) that partition from Linux. Windows will not be able to see it. If you format that partition as NTFS (WinXP/Win2K), Linux can read it, but can't write to it. I believe it now does write NTFS partitions, but it's "VERY" unstable, and still considered experimental. -kwag |
Thank you Maestro:
Both, the external drive and the partition drive are FAT32, I will start this experiment next week or so........ Regards Otto |
Quote:
I will install this, probably tomorrow or so ....... :mrgreen: I already have a machine that I barely use, a Celeron 1.3Ghz, which will make an excelent PVR with the WinTV PVR-250 board. The only thing I need to get tomorrow, is a nVidia card that has TV out (S-Video/Composite). I haven't made up my mind as to what Linux distribution to use. I'll probably go for either Knoppix, or Debian. -kwag |
Update.
I've installed MythTV, and it looks really sweet :D I haven't done any capturing yet. Just looking at the menus and stuff. However, I've found another PVR software for Linux, called "Freevo", which is WAY simpler to install, and looks very promising. I've installed it too, but i'm having some problems with the program guide ( the .xml data). There are users already complainning about this too in the freevo forums and lists. Check it out here: www.freevo.org Also, take a look at where "Freevo" is being used :!: http://www.target-earth.net/xbox/page.html Cool isn't it :cool: So we really have two great PVR choices :) -kwag |
After days of fighting with MythTV and Freevo, I've dumped them both :x
It's been a nightmare, and both systems lockup constantly. These Linux based PVR software must mature, and they are FAR away of that. So I'm currently testing this: http://www.snapstream.com/Products/P...creenshots.asp Which has a broader support of hardware cards, and the user interface is just sweet and better than MythTV. Now that I have my Dish Network receiver installed, which is just EXCELENT quality, i'll play with this software and see how it works :) -kwag |
Quote:
NickSteel |
@Kwag:
how is snapstream working out? I just received my 250 at the weekend and this is a pretty impressive card. I am only able to capture of Antenna (don't have cable or a vcr) but the quality is very good. I'll be able to record some american sitcoms and take them back to ireland now! Cheers, |
Hi rhino ( and all),
I take back what I said about MythTV :!: This is what I'm currently installing: http://mysettopbox.tv/knoppmyth.html KnoppMyth As a matter of fact, KnoppMyth R4 will (should!) be released today :D It's a slim down version of Knoppix, specially tailored with MythTV. This blows away EVERY pvr software I've seen, and even snapstream. I had tried to install MythTV using the regular Knoppix 3.3 release, which meant having to download separate packages, compile, install, re-compilte, dependency problems, swear (swear again!), and I had a NIGHTMARE. It was not Knoppix fault, or MythTV's fault. It just so happens that you need a lot of binaries and libraries on your distro, to be able to install MythTV's distribution, and it's still a lot of manual work. With KnopMyth, that's all taken care of, because it's all "built-in" :D Check their site, as they should announce the download link some time today :cool: -kwag |
So Kwag whats the verdict on Knoppmyth? I have not tried it as I need to partition my HDD. It came as one 80 Gb with xp on it. I'll just get another HDD rather than partition it now.
Cheers, |
Hi rhino,
It's working :!: It was a PAIN (Yes, upper case) to set up, but I finally got it working. In my monitor, it looks just great. But not on my TV. I have to adjust some parameters on the S-Video out, because it doesn't fill the TV screen. That's what I'm doing right now. It has a couple of glitches, and some people report "segmentatin faults" (program bombs) at some points. It hasn't happened to me yet. The only problem I have is the machine I set it up, is only a P3 @500Mhz. However, because the PVR-250 is a hardware encoder, it consumes very little CPU. During playback, where the CPU must decode the MPEG stream and throw it at the video, the CPU is around 55%. Still, that's pretty good :) There are no dropped frames during playback, probably because the graphics card I'm using is a Viper 550 ( nVidia based chipset with TV out). My livingroom looks like a mad scientist lab right now :lol: ( my wife doesn't like me today :mrgreen: ) with pieces of computer laying around the floor ( keyboard, monitor, etc ) :lol: I'll see if I can finish setting the TV screen problem ( on my 60" Magnavox TV ) I'll take a quick picture, hopefully tonight, of the livingroom and the MythTV setup ( as it currenty is :lol: ) and I'll post it here :cool: -kwag |
Quote:
Cheers, |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.