Quantcast Your Opinion Please. can I Post this? - digitalFAQ.com Forums [Archives]
  #1  
05-09-2005, 03:18 PM
Prodater64 Prodater64 is offline
Free Member
 
Join Date: Mar 2003
Location: Palma de Mallorca - España
Posts: 2,925
Thanks: 0
Thanked 0 Times in 0 Posts
Hi: I have been playing with DIKO, FreeEnc, HC and Nuenc and resulting of this, it borns a new app, very simple but useful. I developed it only to work with DVD sources. Not even tested avi sources.
What do you think, can I post this here?

Quote:
Originally Posted by Prodater64
Minor Update: MAY/09/2005: When you install the pack, BK Replacem will be run. Do configure it as in the following pic. After that you can close it. You have not to run it again neither configure it.



Update: MAY/08/2005 v 0.9.0.0: You can install it in any HD, and folder where DIKO is. It is now multilanguage, (english, portuguese, spanish). Read instructions again, please.

Update: MAY/05/2005 v 0.8.0.0: Fixed major bug. I was sending a wrong appl with the pack. I changed TextRep (bad) for BKRep (good).
Both versions, spanish and english one, will work in any XP spanish or english version, installed in any HD.

Update: MAY/05/2005: Fixed some bugs. Added individual audio and video encoding.
Update: MAY/04/2005: Fixed some bugs. Added audio encoding.
Major Update. MAY/03/2005
---------------------------

DIKO - Utilities Pro64.

First at all if your antivirus program give you an alert, just ignore it and exclude the problematics file from antivirus auto scan.
It is no a virus, but a bat file converted to exe needed to wrap command line sended by DIKO to FreeEnc




Now the app is a little bit different than the pic. I'll change the pic soon.

Quote:
Utilities for DIKO by Prodater64 v 0.9.0.0*

Characteristics:*

1 -* DIKO-UT-LAUNCHER.exe:* New launcher that reune in a single interface, all the Pro64 utilities for DIKO, including buttons to launch GUIs of DIKO, FreeEnc, HC Encoder and NuEnc, in addition to the following ones:*


2 -* Switch FreeEnc - Hc - NuEnc:*

* It allows to change between FreeEnc, HC Encoder and NuEnc, like encoder used by DIKO, when in the DIKO configuration FreeEnc encoder is selected.*

3 -* Switch FreeEnc - Hc - NuEnc:*

* It allows to choose the matrix that uses HC to codify.

B = BDVD
K = KDVD
1 = BACH1
2 = AUTOQ2
3 = MPEG
4 = HC
5 = QLB
6 = JAWOR1CD
7 = HVSGOOD
8 = HVSBETTER
9 = HVSBEST

and also the one that uses FreeEnc

B = BDVD
K = KDVD
1 = BACH1
2 = AUTOQ2
3 = MPEG
4 = HC
5 = QLB
6 = JAWOR1CD


4 -* Switch Diko CCE-FreeEnc Matrix:*

* When FreeEnc is used as encoder , (when in the DIKO configuration it is defined thus), is possible to be chosen between the matrices:*

B = BDVD
K = KDVD
1 = BACH1
2 = AUTOQ2
3 = MPEG
4 = HC
5 = QLB
6 = JAWOR1CD

If it is wanted to add some other matrix, ask it in www.vmesquita.com/forum.*

5 -* Switch Diko CCE-FreeEnc Matrix:*

* When CCE is used as encoder (when in the DIKO configuration it is defined thus), it is possible to be chosen between the matrices:*

B = BDVD
K = KDVD
1 = BACH1
2 = AUTOQ2
3 = MPEG
4 = HC
5 = QLB
6 = JAWOR1CD

If it is wanted to add some other matrix, ask it in www.vmesquita.com/forum.*


WARNING:* The GUI is simply a launcher.* IT IS NOT AN USUAL PROGRAM, NONE OF THE BUTTONS ARE BLOCKED WHILE EXECUTING ANOTHER APPLICATION OF THE PACKAGE, THEREFORE, NOT TO PLAY WITH THEM. IF THE ENCODER OR THE MATRICES CHANGE WHILE A PROGRAM IS CODIFYING, CAN GO TO RUIN ALL THE WORK.*



Requirements:*

1 -* Window XP. Not tested another Windows operating systems.

2 -* NOT TO CHANGE THE NAME of "001 - Utilidades Pro64" folder, created within the DIKO directory,


Install instructions:

1 -* If it had already installed the utilities just delete the folder "001 - Pro64 Utilities" or "001 - Utilidades Pro64" in DIKO directory.*
2 -* The exe file of FreeEnc version 0.31 will be overwritten.* Updated versions will be added when these been more stable.* You will be able to use the version that you want want whenever change name to FreeEnc_O.exe.*
3 -* HCBatch exe file will be overwritten. The last one tested is the 0,14 in the folder "...* \DIKO\FreeEnc\". You will be able to use the version that you want whenever change the name to HCBatch.exe (it is included with the package, thanks hank315).
4 -* In "001 - Utilidades Pro64\BK ReplaceEM" folder, there is an app, replacem.exe. It will execute at end of installation. Go to menu, view, options and configure as it is showed in "001 - Utilidades Pro64\bkrep options for launcher.gif". Once you do it, you can close the program.
5 -* Look in DIKO folder, for DIKO-UT-LAUNCHER.exe file and create a direct access to your desktop.
6 -* In folder " 001 - Utilities Pro64 \DLL Backups " are the defenses of the DLLs avicodec of FreeEnc the 0,31 and package of of NuEnc 0,21, (by the doubts).*


Instructions of use: When executing GUI (DIKO-UT-LAUNCHER.exe) will find several buttons. When happening the mouse over any of them it will appear a tooltip that will orient you in its use.

1 -* Switch FreeEnc - Hc - NuEnc: It interchanges between FreeEnc, HC and NuEnc. To execute and to choose the corresponding option.
For FreeEnc and HC it will be able also to select the matrix whereupon it will make the codification, according to the mentioned thing previously.*
When you select NuEnc opens the GUI of the same one.* ATTENTION: THIS DOES NOT MEAN THAT IT MUST CODIFY FROM THE GUI. SIMPLY DOES ALL (I REPEAT, ALL) the SETTINGS, INCLUDING the MATRIX, the RESOLUTION, ETC., BUT NOT Av. VALUE (avg bitrate) SINCE THIS VALUE IS GIVED BY DIKO. CONSIDERS THAT IF THEY ARE SEVERAL FILMS THOSE THAT YOU CODIFIES (in a single session), ALL WILL BE AFFECTED BY THESE SETTINGS.* This is must as NuEnc keeps settings in the registry, and therefore, the best form to select them is from its own GUI.
Adding manually matrices to the NuEnc matrix.ini file, can extend the possibilities of encoder.* Also there is a button for it (SINGLE ADVANCED USERS, Please).*
2 -* There are other options (ONLY ADVANCED USERS, Please.* See HC Encoder documentation.)* for HC that can be edited manually in files INI in "C:\Program files\DIKO\001 - Utilidades Pro64\HC Templates\", "HC BDVD.ini" and "HC NO BDVD.ini".* There are 2 buttons for that in the Launcher.
3 -* Switch Diko CCE-FreeEnc Matrix: It modifies DIKO .ini files so FreeEnc will use the matrices mentioned previously. It is advisable that makes an endorsement of the archives ini of FreeEnc, modified according to your tastes previously to install this package, if you have any.*
4 -* Switch Diko CCE-FreeEnc Matrix: It modifies templates of DIKO so that CCE uses the matrices mentioned previously.*

5 -* We can codify a list of tasks with NuEnc. FOR THIS IT IS NECESSARY THAT FOR EACH ONE OF THE TASKS, A DIFFERENT DIKO WORKING FOLDER BE SELECTED (in DIKO configuration).* Of this form the resulting archives will not be overwritten.
Also there is a file, Fake.ac3 in utilities folder that is for to select as audio file when we want to make a batchlist file. Selecting that ac3 file DIKO will encode that (just seconds) and it will be free to create another task.

6 - It encodes audio with BeSweet or with SoftEncode.

7 - It permits to codify audio or video isolates. Very useful if you want to process 2 audi files for one film.


Prodater64

DIKO - Utilidades Pro64

Reply With Quote
Someday, 12:01 PM
admin's Avatar
Site Staff / Ad Manager
 
Join Date: Dec 2002
Posts: 42
Thanks: ∞
Thanked 42 Times in 42 Posts
  #2  
05-09-2005, 07:09 PM
kwag kwag is offline
Free Member
 
Join Date: Apr 2002
Location: Puerto Rico, USA
Posts: 13,537
Thanks: 0
Thanked 0 Times in 0 Posts
Hi Prodater,

DIKO, or anything related, is no longer discussed in this forum. You already know the story.
We really don't want to bring back all of the "DivX Downloaders" again.
Remove DIKO references, and then it's all fine

-Karl
Reply With Quote
Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
First 2011 post! tengo6dedos Off-topic Lounge 2 01-27-2011 08:24 PM
GPL Version 3 (Hilarious, in my opinion!) kwag Computers 8 08-23-2007 07:42 AM
DVRs: Opinion on MythTV? MrTibs Players, DVRs, Media Centers 8 05-27-2004 02:13 PM
Libertad de opinión Anonymous Convertir y Codificar Video (Español) 8 12-11-2003 04:12 PM
I just wanted to be the first to post :) EightBall Off-topic Lounge 3 09-15-2002 08:21 AM

Thread Tools



 
All times are GMT -5. The time now is 05:15 AM  —  vBulletin © Jelsoft Enterprises Ltd