Replacement remote control for Admiral JSJ-20451
Hello everyone! :)
I recently got an Admiral JSJ-20451 for my NTSC tapes I want to capture, but the remote control was missing. I need to be able to cycle the audio modes on it, and I couldn't figure out how using the buttons on the front panel. Can it be done without the remote? If not, will any Admiral-branded VCR remote work or is it model specific? Thank you in advance for any help, and sorry if I posted this in the wrong section. |
This is a really nice VHS VCR. :)
The "Admiral" brand was Montgomery Ward's in-house rebadge label, and it's almost always a Sharp. I have 3 of these myself. In fact, I may have an extra remote for it. I can tell you exactly what you need. I'll look tomorrow. |
I thought you would approve of the VCR, I got it because of this old thread - https://forum.videohelp.com/threads/...hich-Sharp-VCR :wink2:
If you have a spare remote, and if you're willing to sell it and send it to Europe (Norway), then that is great. I see that I could get a custom remote for it on eBay, but it's really expensive (especially GSP shipping) and I don't know how well it works. Appreciate your reply, lordsmurf. EDIT: By the way, thank you for the VCR buying guide, it's a great resource which I've used a lot. I got a JVC HR-S7965 a few years back based on that thread. :) Are you aware if Sharp made a PAL equivalent to the JSJ-20451? |
I figured it out!
In the menu, the tracking buttons moves the cursor up and down (had already worked that out), and the FF/REW buttons controls side to side (like when choosing the audio modes from L, R or LR). It baffles me that I didn't try this sooner. Well, at least now I know, right? I guess I won't be needing that remote after all, but really appreciate the help regardless. :) |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.