Go Back    Forum > Digital Video > Blank Media

Reply
 
LinkBack Thread Tools Search this Thread
  #1  
10-25-2016, 01:11 PM
gamemaniaco gamemaniaco is offline
Invalid Email / Banned / Spammer
 
Join Date: Aug 2013
Posts: 711
Thanked 15 Times in 14 Posts
1 I received and burned my verbatim dvd-r and the code of which is: MCC 03RG20, this media is good and durable?

2 after burning the medias I did a reading test in ImgBurn (0 error), DiscSpeed nero 5 (100% good but when I check all individual files burned on the disc, a file is not 100% but 48 or 50% but I can extract and run the file normally on the pC, I did not understand anything, this album is bad and little reliable? I throw it away because of that 48% file?

3 I also did the test c1 / c2 test pi-po in nero DiscSpeed 5 and all my burned discs the same file appears with PIF 101, it is also problem to preserve the files on disk?

-- merged --

I bought 25 units pack dvd-r verbatim azo made in taiwan id code MCC 03RG20, how to find out if that media is 100% original genuine Verbatim? I bought the medias on ebay but I know I have a lot of fake verbatim media in Europe
Reply With Quote
Someday, 12:01 PM
admin's Avatar
Ads / Sponsors
 
Join Date: ∞
Posts: 42
Thanks: ∞
Thanked 42 Times in 42 Posts
  #2  
10-29-2016, 06:36 PM
lordsmurf's Avatar
lordsmurf lordsmurf is offline
Site Staff | Video
 
Join Date: Dec 2002
Posts: 14,233
Thanked 2,585 Times in 2,197 Posts
- It's not fake Verbatim. It's genuine.
- C2/C2 is for CD, not DVD, so not sure what you're referring to.
- I'm not commenting on random numbers. I need to see a screenshot of the test results.

- Did my advice help you? Then become a Premium Member and support this site.
- For sale in the marketplace: TBCs, workflows, capture cards, VCRs
Reply With Quote
The following users thank lordsmurf for this useful post: gamemaniaco (11-05-2016)
  #3  
10-29-2016, 06:41 PM
gamemaniaco gamemaniaco is offline
Invalid Email / Banned / Spammer
 
Join Date: Aug 2013
Posts: 711
Thanked 15 Times in 14 Posts
ATAPI drive liteon iHAS122 F Firmware EL06 is reliable to scan jitter, pie, pif, pi-po? I burned 4 dvds-r 16x verbatim azo MCC03RG20 with this drive and then used the scan nero DiscSpeed c1 / c2 - pi-po test to check the 4 tests of 4 DVD disks the same and single file presented PIF: 107 and other files presented results PIE values between 53, 71, 65, 61, 70, 51, 66, 49, 65, 62, 56, 67, 54, 57, 60, 132, 138, 163, 181, 152, 165, 181, 169, 178, 164, 179, 159, 150, 162, 190, 194, 201, 164

PIF value of 1, 2, 1, 107, 0, 4

I think these disks with these error rates are recommended for long-term storage or should I throw them in the trash? I burned discs at 6x minimum speed drive

scandisc read test of nerodisc speed 5 and scan imgburn discs 100% good



Last edited by gamemaniaco; 10-29-2016 at 07:09 PM.
Reply With Quote
  #4  
10-31-2016, 08:41 PM
lordsmurf's Avatar
lordsmurf lordsmurf is offline
Site Staff | Video
 
Join Date: Dec 2002
Posts: 14,233
Thanked 2,585 Times in 2,197 Posts
Re-scan at 4x.
Were the burns made at 8x-12x, not 16x?

- Did my advice help you? Then become a Premium Member and support this site.
- For sale in the marketplace: TBCs, workflows, capture cards, VCRs
Reply With Quote
The following users thank lordsmurf for this useful post: gamemaniaco (11-01-2016)
  #5  
11-01-2016, 07:09 AM
gamemaniaco gamemaniaco is offline
Invalid Email / Banned / Spammer
 
Join Date: Aug 2013
Posts: 711
Thanked 15 Times in 14 Posts
Quote:
Originally Posted by lordsmurf View Post
Re-scan at 4x.
Were the burns made at 8x-12x, not 16x?
1 I burned the 5 dvd-r 16x discs verbatim azo MCC 03RG20 speed 6x which is the minimum speed that the drive accepts

2 I did the scan at 4x and the result was similar, I wonder if through the analysis of a DVD disc 25 units pin to have a parameter if all other 24 media are good or bad for long-term archiving, the other 4 burned discs I kept on dvd black cases and I am using a single media to test if I use the other 4 can scratch

I have to test all 25 disks?

3 ScanDisc read test of Nero Discspeed 5 and scan read imgburn two scans results discs 100% good, but the long term is reliable?

one disc tested of the pin 25 units


Attached Images
File Type: png ATAPI___iHAS122___F_EL06_30-October-2016_18_12.png (51.6 KB, 1 downloads)
Reply With Quote
  #6  
11-03-2016, 06:18 AM
gamemaniaco gamemaniaco is offline
Invalid Email / Banned / Spammer
 
Join Date: Aug 2013
Posts: 711
Thanked 15 Times in 14 Posts
1 I burned the 5 dvd-r 16x discs verbatim azo MCC 03RG20 speed 6x which is the minimum speed that the drive accepts

2 I did the scan at 4x and the result was similar, I wonder if through the analysis of a DVD disc 25 units pin to have a parameter if all other 24 media are good or bad for long-term archiving, the other 4 burned discs I kept on dvd black cases and I am using a single media to test if I use the other 4 can scratch

I have to test all 25 disks?

3 ScanDisc read test of Nero Discspeed 5 and scan read imgburn two scans results discs 100% good, but the long term is reliable?

one disc tested of the pin 25 units


Attached Images
File Type: png ATAPI___iHAS122___F_EL06_30-October-2016_18_12.png (51.6 KB, 3 downloads)
Reply With Quote
  #7  
11-06-2016, 05:40 PM
gamemaniaco gamemaniaco is offline
Invalid Email / Banned / Spammer
 
Join Date: Aug 2013
Posts: 711
Thanked 15 Times in 14 Posts
help, respond???

Last edited by gamemaniaco; 11-06-2016 at 05:51 PM.
Reply With Quote
  #8  
11-06-2016, 06:34 PM
gamemaniaco gamemaniaco is offline
Invalid Email / Banned / Spammer
 
Join Date: Aug 2013
Posts: 711
Thanked 15 Times in 14 Posts
new photos of test nero discspeed 5, tested one media verbatim azo dvd-r 16x ID: MCC03RG20 of the pin pack 25 units 5 discs burned, 1 disc for test, is necessary test all others discs of pin for find out if all others discs are good or bad in jitter, pie, pif?

tested in 8x read test nero discspeed 5 result high PIF in one file in all four discs, high values pie, tested one disc of four discs burned of pin in 4x no appears high pif, has the need to test all other burned discs to see if they are good or bad as the DVD disc tested? one disc tested jitter 11% good or bad? has the need to test all other burned discs to see if they are good or bad as the DVD disc tested?


Reply With Quote
  #9  
12-15-2016, 06:59 AM
gamemaniaco gamemaniaco is offline
Invalid Email / Banned / Spammer
 
Join Date: Aug 2013
Posts: 711
Thanked 15 Times in 14 Posts
Could someone tell me if the disks of this analysis are bad or good according to the images of the test in 4x? I burned the disk in 6x with imgburn and drive liteon iHAS122 Firmware F EL06, media dvd-r verbatim mcc 03rg20, PIE is bad?
Reply With Quote
Reply




Tags
media, verbatim

Similar Threads
Thread Thread Starter Forum Replies Last Post
Best free software for security, registry cleaning - Have doubts! gamemaniaco Computers 7 02-17-2015 07:53 AM
Computer humming noise as DVD drive burns Reading Bug Computers 3 04-15-2011 10:22 AM
Question about audio sync on certain burns Damien Videography: Cameras, TVs and Players 1 03-20-2009 09:22 PM
Inconsistency in burns, some successful, some not admin Blank Media 0 03-19-2009 12:40 AM
Bad Burns, Part Deux Neuroslicer Blank Media 7 09-17-2005 07:23 AM

Thread Tools Search this Thread
Search this Thread:

Advanced Search



 
All times are GMT -5. The time now is 08:58 AM