digitalFAQ.com Forum - SV-5000W shuts down after play or eject?

digitalFAQ.com Forum (https://www.digitalfaq.com/forum/)

- Video Hardware Repair (https://www.digitalfaq.com/forum/vcr-repair/)

- - SV-5000W shuts down after play or eject? (https://www.digitalfaq.com/forum/vcr-repair/13004-sv-5000w-shuts.html)

joonas

10-05-2022 01:33 PM

SV-5000W shuts down after play or eject?

My SV-5000W shuts down after pressing play.

The unit takes the cassette fine, but after pressing PLAY the VCR shows "STOP" and powers itself off, as the cassette will get stuck inside and I am not able to eject it without using extra force.

I have cleaned the mode switch and cleaned the heads without further improvement.

joonas

10-07-2022 04:17 AM

I have the same issue as in this video: https://www.youtube.com/watch?v=4MDbcos-cNA

themaster1

10-08-2022 03:18 AM

Check here for your problem: https://www.youtube.com/watch?v=DFIk...nel=12voltvids

joonas

10-08-2022 06:43 AM

1 Attachment(s)

I have attached POV of my problem to this post

joonas

10-15-2022 03:14 PM

Ok, I have tested the mechanism in the other Samsung machine.

The tape inserts, ejects, forwards/rewinds and plays fine!

What could be the problem then in the SW-5000W machine?

All times are GMT -5. The time now is 12:29 PM