ATI AIW 9600 connector broken?
 

Hi guys. So I have this working ATI AIW 9600 which I have used to capture my VHS'. However it has always bothered me that the tips of the tightening screw had broken off, so that I hadto hold it up with zip ties. I decided to take out the card and loosen the "standoff screws" - if that's what they are even called. In that process the remainder of the pin broke off inside one of the standoff screws.

I will be linking to some photos, so you can see what I am talking about, but my question is of course if the screws can be purchased somewhere or if you perhaps can MacGyver something smart.

Any and all ideas are welcome. I have of course considered salvaging a broken 9600, but they are still pretty expensive and I am in Europe.

Image 1
Image 2
Image 3
Image 4


Thx,

https://www.digikey.com/en/products/...-standoffs/582
https://www.digikey.com/en/products/...QTAGhDOl5gL6aA
I don't know where your from but digi key has a selection.
Doug