JVC HR-S5800AM, 4 dashes, auto off in 3 seconds?
 

Hi,

I have a HR-S5800AM/HR-S5880AM which has been plugged in on the rack and showing the 4 dashes for maybe 8 years. Yesterday I had to use it for the first time for ages. I put a tape in and it got stuck in there.

After a while it did come out but when it goes in again all the LED lights up for a few secs then it goes back to the 4 dashes. Happens all the time.

The 2025 battery was very low but replaced it but it didn't change anything.

This is the best box I have ever had so don't want to lose it and I am now ready to transfer so many VHS tapes to PC.

I am in Sydney Australia.

I have found this place and am awaiting a quote but would like to know if there are any suggestions.

I've taken the top off, but none of the capacitors I can see are bloated. All looks very clean an good actually. When I put the cassette in the tape does go to the drum, then back, then back to the drum and stops.

http://www.jvpservicecentre.com.au/:

Thanks

oz
:question:

As you already know, similar issues happen with many JVCs: http://www.digitalfaq.com/forum/vcr-...0am-keeps.html
It's a self-protection error, it shuts off.
You must locate the problem.
Finding the problem is generally pretty easy for the dynamic drum units -- of which this is not one.

Without seeing it, hearing it, hard to say. If you can't find a local repairman, perhaps you'll need to shoot some images and video of the internals of the deck, and perhaps somebody here has some ideas.

While I'm good at JVC repair/maintenance -- merely a side effect of having used them for 20+ years now -- others here are better than I at finding some of these issues. At I'm at a loss on this one.

I also see you other post in the 7600AM thread