4 Attachment(s)
Ending up having a hell of a summer and wasn't able to work on any of this video stuff... but I've started the process up again tonight and did my first capture with the Hauppauge Live2 USB. Recording went smoothly with zero dropped frames. I did a recording using the JVC DR M100 DVD Recorder to compare against, both with pass through from the Panasonic DMR ES-10.
Just finished the Live2 USB recording and the main issue I've noticed so far is there is quite a lot of noise in the audio track. Typical VHS noise, but this tape is in good shape, my VCR heads are clean and I have not had this noise issue using any of my DVD recorders for the same tape.. that's 3 different DVD recorders and none have picked up this noise which is constant and distracting on the Live2 USB recording. Will have to do some recordings of different tapes to see if its always present or what.. but I'll get some clips made of the different recordings to post for the sake of reference. -- merged -- Ok, here are a couple comparison clips of transfers: VCR: JVC HR-S3500U SVHS using S-Video connection One transfer is using the JVC DR-M100SU DVD Recorder Other transfer is using the Hauppauge USB-Live 2 Both of these recordings had the video signal passed through the Panasonic DMR-ES10 DVD recorder to apply its TBC function to the video The only issue I had with the Hauppauge is the presence of audio noise in the right channel that sounds similar to audio noise during tracking, and its present through the whole recording and quite loud. It seems to be just this VHS tape but I have not gotten this audio noise problem when I record the tape off to 3 different DVD recorders... strange. Since the lossless avi clips are quite large, I have encoded all clips to x264 to reduce size and also correctly display AR/cropped out the black. I haven't filtered the picture or anything otherwise and used sufficiently high bitrate to where quality shouldn't be affected. I don't know if anyone really cares to see these comparisons at this point or not, if anyone wants uncompressed clips for comparison I can provide them |
Quote:
|
Quote:
-- merged -- I should also mention the clips are from a 1999 movie "The Apartment Complex" and the VHS release is a very cheap, shoddy release with a lot of problems in the video. So if anyone's looking at these clips for an idea on the recording quality of the equipment, that should be factored in. I will be transferring some other tapes, if there's any interest I can post more example clips from different sources |
3 Attachment(s)
The videos have been compressed, so I do not know if the comparison is fully appropriate. In addition the USB-Live 2 capture has been downsampled to YV12.
I can comment that Hauppauge capture is nice for details, colors and overall look; the levels are well distributed (and do not present the classic "spiky" histograms because the post-processing operation). Attachment 15698 The levels of JVC capture are shifted-up compared to USB-Live 2, and extends in Y higher levels, if you need a 16-235 range for whatever reason you need to shrink them. Attachment 15699 I did not equalize the levels to USB-Live 2 for the comparison, here is some sample: https://imgsli.com/MTI5OTA3 use fullscreen and zoom https://imgsli.com/MTI5OTQ3 use fullscreen and zoom The is some ugly image distorsion in JVC capture in the lower part of the gate in the background, easibly seen when sliding the images in the above comparison; it should not be related to its original MPEG-2 compression, and I ignore the reason for it. Attachment 15700 There are inserted and dropped frames in JVC capture in the second clip (I did not check intensively the first). About your audio noise problem with a specific tape, I do not know what to say, I never had a significant problem with USB-Live 2 capturing the audio. If you experience that the audio recorded by the JVC is better, than you can try to mix it to the USB-Live 2 video, but be careful of the dropped/inserted frames in the first. An AviSynth denoise/sharpening post-processing on the USB-Live 2 capture can improve a bit. And finally, if if wish to redo the comparisons, do it on original captures, and eventually equalize the levels to have a better reference. Also an |
Quote:
Quote:
Quote:
Quote:
Quote:
|
Quote:
Quote:
Quote:
Quote:
|
I will post up some different, very short clips that are uncompressed - they will have to be extremely short because the clips I posted here all exceed the size limit for the uncompressed lossless avi capture from the USB Live2. The uncompressed mpeg isn't a problem for size, but the lossless avi is quite large.
Yes, the audio problem so far is limited to just this tape - at least based on my *limited* testing. I have only popped in a couple other tapes to check and they so far have not had this audio issue. But I can't get rid of it for this particular tape. I will sync the DVDR recording audio instead, which isn't a problem for me as I do audio syncs regularly for years... I just don't want to have to do this every time I make a recording. I've also tried moving the VCR and changing power outlets in case its some kind of interference, no luck. The audio from the USB Live2 is actually quite good aside from this noise - it is much more clear and crisp than the DVDR. I haven't tried to rerecord the tape to DVDR again, so perhaps the noise would appear on DVDR now if I tried (maybe the tape has somehow degraded, although seems unlikely) This movie varies in how bad certain issues are - outside daylight scenes look awful and I didn't post any of those clips. After comparing many different scenes, the USB-Live 2 wins for me by quite a lot in overall perceived quality I wasn't sure how much people would still be interested in these clips - I can post some different tapes if there is interest. I also have this same tape recorded by the ES10 if that's of interest for comparison Also, regarding inserted frames - it could be that when I encoded the clips to x264 I left the framerate at 29 instead of doing an IVTC to get it back to 23.976, which has worked very well for this recording. |
Quote:
|
8 Attachment(s)
Ok here's a variety of clips that are untouched aside from clipping them out. I haven't done anything to them. I tried to get a decent assortment of different light/dark levels
I didn't realize originally that you are only limited to the size upload per upload, I thought it was the total attachment size. So if some of the clips are too short to use properly, let me know |
2 Attachment(s)
The new raw samples confirm the previous impressions, and the differences are even more evident.
I quickly equalize the brightness, and the details are different in the JVC capture: Attachment 15711 The image comparison here: https://imgsli.com/MTMwMDc4 The distortion is not present in the new JVC sample, it was probably due to a bad postprocessing: https://imgsli.com/MTMwMDM0 Thanks for your samples, and good luck with your captures! |
Very keen eye, lollo2. Thanks for sharing the comparison. The USB Live2 looks better to me just on initial glance overall, but I hadn't noticed those levels of difference when zoomed in on the detail
-- merged -- I've done a little more testing and I think the audio noise issue I was having is mostly fixed by fine adjustments on the manual tracking. Although the tracking seemed to be set well, hitting the tracking button a few times seems to find a magic spot for the audio where it mostly avoids the noise. So it seems it was not an issue with the USB Live2, just for reference -- merged -- Ok, I'm capturing a new tape and its very dark so I have to make some levels adjustments. I've been experimenting with the best way to do this and wanted to try just using the Proc Amp settings available in the USB Live2 Input Device Settings (it has brightness, contrast, hue, saturation, sharpness in the proc amp settings) When I adjust in the settings, it clearly shows the changes in the preview window but when I hit capture to start recording, the capture display resets to the default values and it ignores the proc amp settings entirely. It doesn't actually reset the settings, because they remain the same, it just captures at the default settings regardless. I'm using AmarecTV 3.10 and after a little searching, it seems I'm not the only one to encounter this: https://www.digitalfaq.com/forum/vid...ive2-proc.html https://forum.videohelp.com/threads/...Dub-Don-t-Work Doesn't look like a solution was ever figured out. Any chance you know what is going on here, lollo2? I know levels can be adjusted in Avisynth, but I find it easier to do it via the Proc Amp in the initial capture, if possible (or at least get it in the ballpark) |
2 Attachment(s)
Quote:
With AmarecTV it works for me: Attachment 15725 If you experience a reset of your settings when you start recording, try to use GraphStudioNext: open the program, load the filter "Hauppauge Cx23100 Video Capture", go to the procamp menu and set the values. Then start the capture. You can also use the AviSynth histograms before capturing to check the setting on a significant segment of the video, which is a wonderful feature: https://forum.videohelp.com/threads/...TV#post2614699 And you can also capture with GraphStudioNext building a dedicated graph, but that's another story, and the audio/video synch only relies on the presence of the coming audio and video frames at the right time, so if there is any dropped frame, the capture will be asynch: Attachment 15726 |
Quote:
I'll also have to play with viewing the Histogram levels in Avisynth for the captures to get everything right. Thanks for the tip |
Lollo, is it valid to use the Virtual Dub histogram to set the levels, then capture with AmarecTV (if necessary, using Graphstudio)?
|
Sure, you can fix the levels with Virtualdub Histogram utilty, and apply the values later in Amarec.
The AviSynth Histogram approach should also work with VirtualDub (I never tried), allowing a more detailed analysis; but it is only a nice to have feature, not strictly necessary. |
You need to understand (or remember) certain aspects of AmaRecTV
It was newer software, only around for about 6 years (late 00s to 2013/4). Far fewer people used it. So it never had the bugs sorted out like the VirtualDub capturing function. And it has MANY issues. When it works, it (usually) works well. But more often it doesn't. It hates quite a few capture cards too, so the scope was always narrow, probably mostly focused on cards available in Japan in the late 2000s (ie, not too many). The dropped frames issue needs further study. I'm not convinced that it magically doesn't drop frames, as compared to VirtualDub. The more likely issue is in how drops are reported, at best how badly timed frames are handled. It's not magic, something is going on there, and to date nobody has explained it (because nobody probably knows how). Remember, you can easily make VirtualDub "not drop frames" by simply ticking those two upper timing settings, which essentially just disables the reporting. AmaRecTV mostly works with several Hauppage cards, Japanese cards, and maybe something like the VC500 (which is a crappy card, AGC issues). So if it works for the basic functions as needed, and you're not seeing dropped/duped frames (LOOK FOR THEM!), then don't push your luck. Those "other features" of the software are not suggested. Proc amp controls in-card are already digital, so you can just do it in software later anyway (and probably much better than the weak AmaRecTV controls), it's not an actual analog domain proc amp. |
Quote:
Quote:
|
Quote:
When it comes to this software, do try it if needed, but proceed with caution. It's not the best software, but has narrow uses, not too different from other aspects of video hardware and software. What I don't want to read is cheerleader-like glowing gushing praises, as it doesn't deserve that whatsoever. Realism needed. I do this with anything, be it JVC VCRs, ATI AIW cards, or various TBCs. It ain't all roses. When things get a bit too rosy, time for a douse of cold water, back to reality. That's what keeps you grounded, when it comes to ... well, anything, really. But for sure SD analog video capture. I get tired of seeing undeserved over-the-top praises for JVC 9800 decks, TBC-1000, etc. These are tools, not lovers you're trying to bed. Understanding is knowing. ^ and I surely stole that from a 1980s cartoon! :laugh: |
Quote:
What I read, on the other hand, are non sense comments about unknown issues, dropped frames assumptions never rised and out of contest, confusion about procamp setting of the card mixed with the capture software capabilities, AmarecTV nice for Hauppauge cards while in the last days we had 3 ATI USB users solving problems with it, and so on. There is enough. Today is not your best "posting" day, LS, it happens sometimes (not stolen from any cartoon :)) |
Quote:
Quote:
Quote:
But I don't know about the toons thing. I'm not sure Megatron never uttered "Today is not your best Prime". :laugh: |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.