Fix VHS dot crawl problem in Hybrid?
 

Hello once again.
Im using Pinnacle Dazzle as everyone know, so i got a dot crawl problem witch i tried to fix via Hybrid.
But that was unsuccessful.
I just need to fix this trouble...
And yep the recording on LP speed.

It seems i got Chroma dots (Hooray to MESECAM/PAL)

If you use composite cable anywhere in your chain, you might need to start using S-Video connection.

Unfortunately, i could not have an access to perform this (SCART ADAPTORS arent count)
And they are ruining the capture quality

Actually, SCART adapter would not be that bad. I'm talking about a dongle which has male connector to SCART to connect to your VCR socket and female socket to plug in your S-video cable.
Assuming, of course, your VCR support S-Video over SCART.
Also, it doesn't guarantee it will solve the problem. Dot-crawl might be already recorded on your tape.

I already got it, but it getting a worse result when recording a MESECAM recordings

amarec_20260420-191759 - Direct Composite
amarec_20260420-191817 - SCART adaptor with SVideo

Double check your setting for your SCART in VCR set to S-Video, not just Video.
Btw, all your attached png files give me empty white rectangle.

Jeez... this is cuz amarec is giving me .bmp not png...
And how i could check this at my Samsung SV-DVD 645P?

I'm not familiar with that device, but usually you call the menu and browse it.
Look for connections, input/output settings. They might call it AV1, AV2 etc.
By default this setting is set for Video. It means your luma wire of S-Video connector gets a mixture of luma and chroma (composite signal) and you chroma wire gets chroma. I've seen that before. Dot-crawl is given in that scenario.

Do you got any social media?
I could send the result of this (It worse at any case no matter what i set)

That's not needed.
Put the images in a .7z or .zip file, attach that here.

Okay i'll do it right now

Here it is.

Don't you have S-Video jack on the back of your SV-DVD645P?

I have only for DVD output

Have you tried playing VCR and connecting S-Video?
Anyways, the setting for the SCART from your menu:
DVD -> Display Setup -> DVD Out -> S-Video.
Something tells me if you can get S-Video from the SCART, you should have in from S-Video jack too.
Good luck!

Nah, same result even if i connect to dvd jack it will stuck in DVD menu

So, where you able to switch SCART to S-Video?

You mean I need to connect to SVideo Jack instead of SCART?
Well I did already, and I described what result I’ve got

No. I was talking about changing SCART mode through the menu.
See above.

I could not do this.

May I ask why?

Idk it just isnt set to SCART only Video/SVideo/RGB

Sorry, not sure what you are trying to say.
Just change the setting and test the SCART -> dongle-> S-Video cable chain to see if your tape video became better.
You always can change your setting back.

Okay i'll try.

GUYS! I only now noticed that fact is Samsung SECAM VCR could transcoder ur MESECAM recording to a clean SECAM (I tried to copy and it has no color loss)