DVD drive firmware for M-DISC support?
 

Where do I find out if my 2009 Samsung Sh-s223b DVD drive has a firmware update with M-DISC support?

Probably the Samsung site. Search it.

i searched but i didn't find any firmware on the samsung website

My DVD drive is a Samsung SH-S223F / BRDH is there any firmware for this drive that fully supports the M-DISC?

Is there any software to test my dvd drive and optical reader and show if it is bad, reasonable, good or excellent?

SH-S223B
https://www.google.com/search?q=sh-s223b+firmware
https://www.firmwarehq.com/Samsung/SH-S223b/files.html

SH-S223F
https://www.google.com/search?q=sh-s223f+firmware
https://www.firmwarehq.com/Samsung/SH-S223F/files.html

A drive from 2008/2009 won't have anything "new".

The M-DISC was launched in 2009

my drive model is written SH-S223F / BRDH but does the model SH-S223F have a difference in firmware between them?

is this samsung SH-S223F / BRDH model good or bad?

is it possible to correct the defect in the button to eject the drive tray that has fallen and been lost?

-- merged --

what software do i use to write this firmware update file to the drive memory????

samsung drive SH-S223F firmware is the same as SH-S223F / BRDH???

One of my drives will not eject using the button on the drive. But the software command works. So I just eject in the software. It's bad to just shove a drive back in, so I use the load function. If the software doesn't have a load, I'd usually use my other drive (I have multiples per system). But sometimes I need to "no eject" drive (for scanning), so I use DVD Decryper just to open/close the drive, then do what I want, close scanning program, DVD Decrypter again to open/close. Or Imgburn, same thing really.

You use whatever tool it needs. Most are actually using command-line (DOS), but it varies on manufacturer.

what software do i use to update firmware of my drive dvd????
I only have the .exe firmware

samsung drive SH-S223F firmware is the same as SH-S223F / BRDH???