Good thinking Karl :)
I had already forgotten that possibility.
That just shows how long I have dropped Tmpgenc :roll:
I will add that possibility as the 1st reference.
The other two will remain just as an option for those that don't have/use Tmpgenc.
Thanks for your opinion ;-).
Cheers

I am sorry to not having seen that before but I do not agree with you at all ! FitCD does the crop exactly as it should be done !
For intance :
Source = 720 * 576
Border (L/T/R/B) = 4,70,4,70
Result = LanczosResize(704,432,4,70,712,436)

Source = 720 * 576
Border (L/T/R/B) = 4,70,10,70
Result = LanczosResize(704,432,4,70,706,436)

Source = 720 * 576
Border (L/T/R/B) = 10,70,4,70
LanczosResize(704,432,10,70,706,436)

You can see that if you change the right border only, the change is taken into account by modifying the crop area, and if you change the left one, the offset of left corner is changed also. This is the correct way to process.

Not necessary at all, as explained above.

That is done (more or less) automatically by using the "accurate" mode. Doing it manually is not really better.

Yep, this one's clear to me.

This one isn't. I did a small test and you are correct, I just wonder how does Avisynth know that it should crop more on the left than the right side (and vice versa)? That was my point for doing the manual cropping.

That is done (more or less) automatically by using the "accurate" mode. Doing it manually is not really better.[/quote]

Doing it manually allows to leave the film pixels intact, FitCD crops more to maintain a correct A/R. But as always, it's a matter of taste. If you use the script FitCD gives, it's of course the easiest way to let the program do the automatic cropping.

In short, maybe Rui should edit his guide again :lol:

That's why I said I was sorry to see that only today :-D

:twisted:
No problem :lol:
Noone else wants to change their opinion :rotf: :?:
Then I'll wait for tonight to change everything needed.
Thanks for helping guys.
Cheers

Makes the user's download slower, but doesn't raise my ISP's transfer, because the downloads are coming from your links ;)

-kwag

I'm confused... :)
Shall I live those as they are, or make download links as jeo advised?
Cheers

In my opinion they should stay visible, much easier that way as they are available without clicking each and every one of them.

That's also my opinion.
But then, some are really big in resolution size and data space.
Karl, says space is not an issue because it's being downloaded from another site.
But it is for guys that are viewing the guide because in slow links it can take a while to download everything...
As to size (almost full 1024x768) I'm only uncertain because maybe it won't look too good...
But I guess I'll go for full pics on page.
Cheers

Come on guys.
No need for anybody to get annoyed over a small tutor, right?
Besides, and since my wife is not feeling so good today, I'll only have time to update it tomorrow.
So for today, I'll enjoy 5 more minutes of forum browsing and tomorrow I'll do all the changes based on everybody's valuable oppinion.
Cheers

@Rui,

Post both pictures. The thumbnails, and the large ones. Then everyone will be happy :roll:
If anyone has a fast connection, they can click on the large ones. For slow connections, they can click on the small ones.
Happy everyone :) :?:

-kwag

I agree to that, but then, add a text that says just that, or something like: "Slow connections, click here", and another text that says: "Fast connections, click here", etc.
That will accomodate everyone. Could you please explain this :?:
I didn't understand that :roll: Maybe now it's more clear with what I added :?:

-kwag

Ok,
Everybody made their point :lol:
I'll let Karl decide what's in the best interest of the forum and it's users.
Then I'll repost everything with the corrections needed.
I just need to finish a couple of pictures.
And then maybe we should clean this thread, a bit ;-)
Thanks to everybody that is contributing.
Cheers

Do not be surprised if some posts seem to have disappeared, it's normal ;-)

I just add my two cents :
- when a site offers free service, it is normal that it does "propaganda". So please do NOT use other links than the ones provided by the site

- a tutorial is attractive only if it has pictures. A long post with no image is boring, so I suggest to let the thumbnails. I am the one that decided that the post must become a tuto and I wouldn't have done this is there was no picture.

Last but not least :

- I ask to normal users to not discuss moderators hints. This is a normal rule for any forum, including kvcd.net. Pro64 and Boulder are moderators of the present forum section.

Oi Correia, excelente tutorial, eu não li a thread inteira (estou no trabalho agora) mas parece ter bastante informações interessantes, assim que chegar em casa vou ler tudo (ou melhor, tentar pelo menos, meu inglês é fraco), mais pra frente, quando você estiver com tempo, teria como você disponibiliza-lo em português também ?

Realmente ficou muito bom e bem detalhado, parabéns!

Um abraço!

Hum hmu... I know two guys (giniboy and rui) are portuguese natives but please, do post in english here. Thanks :-)

@ginoboy,
Thanks gino :)
It was basically team work ;-)
As to translating it to Portuguese, I'm affraid I don't have much time.
Maybe in the near future.
Cheers

Ok Phil, thanks. :wink:

@Rui

Ok, thanks.. :wink:

[]'s