SAMPLE Encodes for KDVD, KVCD, CVD, SVCD, VCD and "x"
Hi everyone :lol: :lol:
I thought it was time for me to post my first kdvd sample, being that it was long over due. I hope it lives up to some of your expectations. Kwag.. if you're reading.. sorry for the LONG delay in sharing these. Sample # ----------------------------------------------- 7 - 2ndpc.redplanet.cq(74.72x2000x518).ave909.m2v 6 - matrix.mpg.sample.21min.cq(39.86).rar 5 - 1.061403.a.01a03g(duce).(704x480).cq(60x2500x0300x 0x0).rar 4 - N/A - divx.5.02.sci-fi.01.rar 3 - N/A - (kdvd-352x480-half-d1).(osprey-210).mtb.punkd.mpg 2 - N/A - (kdvd-352x480-half-d1).(osprey-210).tmobil.phones.mpg 1 - N/A - kdvd.352x480.half.d1.sable-torrie.rar PowerDVD users: --------------------------------- To play my 16x9 encodes videos in the way they were intented to be played under powerdvd, please apply the follow settings: 4:3 Pan&Scan Screen: [Change to 1024 x 768] [x] Ask me before change -- -- -- -- 16:9 Widescreen: [Change to 1024 x 768] [ ] Ask me before change -- -- -- -- Screen Control: [ ] Run full screen [x] Keep screen aspect ratio Note, all other SW players will play incorrectly, and result in 4:3 view. Fullscreen view in SW players ie, WinDVD incorrectly displays 16x9 encoded videos. Only True DVD disks w/ 16x9 are played properly in WinDVD. -vhelp |
The sample ( and the two samples :mrgreen: ) looks great :wink:
-kwag |
I have U/L'ed my 2nd Sample kvcd clip.
This latest sample clip is based on my NEW Osprey-210 analog capture card, by ViewCast. Read HERE for more info. So far, it's an awsome card, though it's based on an A/D 8 bits and Conexant 878A chip. So far, doesn't seem to drop any frames, and actually captures TRUE frame (based on final quality I have observed so far) After looking at the clip in PDVD, and looking so good, I was fooled into beleaving that it was a 720x480 encode by mistake he he.. but it's not. Well, in my eyes anyways :wink: Another one is on the way - an based on Interlaced origin. But, maybe tomorrow, I'll U/L it. Then, maybe, I'll do some VHS samples, PICs etc. maybe. Enjoy for now. -vhelp |
That sample #2 looks REALLY good :D
Are you using the drivers that came with the card, or are you using btwincap :?: -kwag |
Hi Kwag..
I got caught up in the MTV Modona special this evening and did a bunch of caps w/ my new toy (card, he he) and then I took a nap.. work is just too demanding these days, you know ? Anyways.. >> That sample #2 looks REALLY good Thank you. (still experimenting) >> Are you using the drivers that came with the card, or are you using btwincap Actually, yes. I"m using the drivers that came w/ the device, v1.37 I think. I'm running the card under W98 Gold, not the Win98 SE. I also used AVI_IO as the capture app, but so far, in the short time I've spent w/ it, I've only used the BTYUV mode with the caps I done so far.. including the one you D/L'ed :D Also, the driver I'm using is VFW based. Not WDM. Yeah.. I got the card up and running in know time. Drivers installed rather quickly too. (there's an order to these things - - course, you already know that) If you are still curious, I'm gonna try and squeeze in another sample.. Like I woudn't, hah !! But, I still haven't tested VHS yet. So, we'll see. -kwag |
Sample #3
Here's my other sample clip I promised yesterday.. check it out if you like. I don't know.. I think it looks pretty good to me. - - (LINK is on top of page 1) :lol: :lol: http://www.digitalfaq.com/archives/error.gif Code:
Card: Osprey-210 (analog cap card) -vhelp |
Hey vhelp,
You have a hell of a clean satellite system :D That sample is one of the best I've seen :!: I wish my 4DTV would look like that :roll: Edit: Not to mention that your sample is a 29.97fps "video" sample (not FILM), so it would have looked even better if it was a real FILM, captured and then IVTC'ed and encoded at 23.976. How about a sample like that, maybe from a movie :idea: -kwag |
where did you capture that mtv from? i got cable and my captures always come out with lots of noise.
|
Quote:
Im seriously thinking on getting a new receiver :!: @vhelp, Was that capture done via S-Video or Composite :?: Note: That sample is less than 12MB in size, and it's almost one minute long. So that means it would fit ~360 minutes (6 hours) on one DVD at that quality :mrgreen: Not bad for being a 29.97fps encode :lol: -kwag |
Hi Kway..
Quote:
bringing me much richer/vibrant color than my ADVC-100, but I would have ta do some testing on that - cause, it could be just my eyes 8O Quote:
to the card. Listen, do me a favor, check out Punk'd on MTV. It's on for the next ~2 hours. I ask, becaues it's in very good quality. It's all in the source, and who is airing it (most sources are tainted or bitrate starved, though I don't understand that factor in louzy quality) MTV, BET, CBT, VH1, MTV-2 and BET are always in great quality. But, ine one clip I did, I found that one of the videos' was actaully black-bared, cause they didn't do a good job.. they left the top viewable 8O Quote:
to my monthly. I already just upgraded my account to the next level, no thanks to DirectTV cutting out channels ie, Sci-Fi and TNN for starters. I had decided (was gonna do it anyways) to step up, cause I mainly wanted don't laugh.. 8O TVLand 8O cause I wanted Batman (to figure out HOW to de-SCREWA-lace their source. It's pretty screwed up.. the telecining process that is. But, you gotta see the quality they are airing it on TVLND. I was happy even with 352x480 captures. Anyways, I'm gonna try it w/ my new card he he.. conquest10.. Quote:
kwag.. Quote:
hay, Kwag.. (and others) set your capture to MTV. They are doing Punk'd on Osborns daughter. It's a repeat, and I recall the quality very good. I'll do the same, and you can compare your's to mine ?? Good idea ? Thanks all for your response. -vhelp |
Quote:
So DirectTV receives the C-Band transmissions, demodulates them, recompresses them, and re-transmits on DirectTV KU Band. So DirectTV is a "third" generation signal, which in theory, has to be worse than the primary C-Band signal which is what I receive. So definitively my receiver is flaked up :roll: BTW: Are you aware that DirectTV limits their MPEG-2 DVB broadcast resolutions to 480x480 :?: -kwag |
Kwag..
Quote:
the sharpness and overall quality (from a capture and encode) will not suffer. Like, it will be as if you were doing a re-encode from a DVD rip of someone else's RIP to Encode ie, SVCD. But, assuming they did it perfect. As for Satellite and quality, I do see artifacts in their MPEG-2's and as such, I live with it, and factor that into my final MPEG quality analisys. Interlace.. What makes Interlaced encodes poor in quality, is the way the user applies a de-Interlace method. Please believe guys, there are lots of various forms of Interlacing sources, and that explains the reasons why one clip will look great, while another one will look bad. Plus, their station airing the source. Is it bad (due to the Interlace) etc. So many things to consider. I have found that you have (MUST) come up with more than one form of de-Interlace method. And, lable them so that you can track them per source materials. I'm still working on a number of de-Interlace method. -vhelp |
Quote:
|
@vhelp,
What filter chain did you use for those samples in avisynth :?: -kwag |
Quote:
-kwag |
Kwag..
Quote:
found myself working more on the de-Interlacing. As you know, they are a great pain in the butt. As I posted earlier, that not all de-Interlacing methods are (or act) the same. ie, I was desapointed at another clip I did, using the same method. So, that's why you have to have various methods, and to lable them, so you can better easily apply them to various encodes :wink: As I do each new TV show, I keep a record of the form factor Example: * Interlace; progressive; IVTC or B-IVTC I'd love to try some filters that I haven't ben able to try yet. Being that I'm still useing AVIsynthv1 Beta 5 LOL. But, I might install it on my 2nd pc w/ my new capture card :wink: and keep the old version here on my first pc. I don't know, we'll see. Just that things are working on both pc's w/out issues, and I'd hate to disrupt that 8O Edited by vhelp for content.. snip snip..a got off track of my own thread.. snip snip.. :lol: :lol: so much more to say, but so little time.. ah, but the fun of it all.. -vhelp |
Sorry about the other post. I wanted to change some things around and
posted two posts too quickly. It's deleted now. It's very late for me, as you can see. Anyways.. Well, I'm heading for bed. It there are typos in above post, so be it. I'm too tired to bother :( I'm heading for bed. See you all tomorrow. -vhelp |
- #4 -
hi all. Here's a sample capture and encode to divx 5.02, from the Sci-Fi channel. I was surfing the channels and this happen to catch my eye (and ears) and I coudn't resist. See page 1 for LINK. -vhelp |
Sample #5
I'm U/L'ed a sample clip I did early this week, since it's small enough. For optimum viewing quality: ---------------------------- Please remember to view it ONLY w/ PowerDVD and set under Configure(Ctrl+C) under Screen and Video tab, the following: Code:
* 4:3 Pan&Scan: [1024x768] normal window view and FullScreen window view - correctly. Weather your source is DVD media, or your own MPEG-2 encodes. Warning: --------------- * Note, if any other software player is used ie, WinDVD, it will not play ...the movie in correct 16:9 AR and will also add lots of NOISE/BLOCKS. * Also, based on my experience, these apps do not have good AR viewing, ...as they seem to be ment only for 4:3 Aspect Ratio's, and will stretch ...the Height incorrectly, when making your own MPEG-2 16:9 encodes.. which ...adds noise/blocks, giving you the wrong impression of the encode. Sample clip is at top of Page 1 (this page) Enjoy the sample, and as always, feel free to comment. -vhelp |
Hi vhelp,
That sample looks great :D BTW, what movie is that :?: -kwag |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.