digitalFAQ.com Forums [Archives]
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

digitalFAQ.com Forums [Archives] (http://www.digitalfaq.com/archives/)
-   Video Encoding and Conversion (http://www.digitalfaq.com/archives/encode/)
-   -   DockingGate is a powerful tool! (http://www.digitalfaq.com/archives/encode/9506-dockinggate-powerful-tool.html)

Prodater64 06-10-2004 01:25 PM
Quote:
Originally Posted by oxycotton420
hello again :D
alright i got a big .VOB file i extracted audio and all that and extracted a D2V. Moviestacker only reads D2V and AVI. so i loaded the D2V in there and copied my avisynth source, now the probelm:
:arrow: when i get to the MencodeMe part, i load the D2V and then which Filter would be best to use :?:
And i didn't make an AVS because its not an AVI :) please correct me if i'm wrong
Hi: You must to rename your bigvob.d2v to bigvob.vob. Then use it as input for mencoder. Don't need avs script, load it in MencodeMe and choice combo DVD. Select all others settings (movie time: Take it from DVD Decrypter), and press encode.

:D


--------------------------
Visit: Intermediate guide: MencodeMe/Win32 - Avisynth - MakeAvis by Prodater64.
Visit: KVCD - MencodeMe - Auxiliar Task - KVCD Docking Gate by Prodater64.
Visit: Mencoder scripting with AVSEdit and Guide for Multiple Files by Prodater64.
Visit: Mini-guide quick and easy - DVD to (S)KVCD with MencodeMe by Maurus.
Visit: Mencode-me: a newbie oriented GUI - 0.23 is out! by VMesquita.
--------------------------
http://www.digitalfaq.com/archives/error.gif

oxycotton420 06-10-2004 01:29 PM
hehe yeah alright thanks man. btw very nice script. i was reading your other one that you made didn't quite understand :lol: what it was for but anyways thanks bro GREAT GUIDE

Prodater64 06-10-2004 02:04 PM
Quote:
Originally Posted by oxycotton420
hehe yeah alright thanks man. btw very nice script. i was reading your other one that you made didn't quite understand :lol: what it was for but anyways thanks bro GREAT GUIDE
Well, you only need post your question in script thread, and I will answer you. (taking in account that you are the only one that say me something good about my scripts)
:wink:


--------------------------
Visit: Intermediate guide: MencodeMe/Win32 - Avisynth - MakeAvis by Prodater64.
Visit: KVCD - MencodeMe - Auxiliar Task - KVCD Docking Gate by Prodater64.
Visit: Mencoder scripting with AVSEdit and Guide for Multiple Files by Prodater64.
Visit: Mini-guide quick and easy - DVD to (S)KVCD with MencodeMe by Maurus.
Visit: Mencode-me: a newbie oriented GUI - 0.23 is out! by VMesquita.
--------------------------
http://www.digitalfaq.com/archives/error.gif

oxycotton420 06-10-2004 03:48 PM
okay this is a post just for my educational purpose and my curiousity hehe

okay in the temp.conf i would like to know how do i find out the following from a srouce (VOB/AVI) without loading the source and the use of Mencode-ME:
Code:

vf=yuvcsp,scale=480:572:0:0:60,crop=0:0:-1:-1,unsharp=l3x3:0.6,hqdn3d=3:6:8,unsharp=l3x3:-0.7:c3x3:-1.5,noise=2uh,expand=480:576:-1:-1:1
of=rawvideo=1
ovc=lavc=1
nosound=1
sws=2
lavcopts=vcodec=mpeg2video:vrc_eq=tex:vmax_b_frames=2:vrc_maxrate=2500:aspect=1.3333:keyint=24:vrc_buf_size=917:preme=2:precmp=2:vstrict=-1:autoaspect=1:scplx_mask=0.3:vqblur=0:mbqmin=1:vqmin=1:mbqmin=1:lmin=1
the ones underlines and bold i don't know what they mean the rest i know what it is thanks

Prodater64 06-10-2004 04:37 PM
You need to read http://www.mplayerhq.hu/DOCS/man/en/manpage.html


--------------------------
Visit: Intermediate guide: MencodeMe/Win32 - Avisynth - MakeAvis by Prodater64.
Visit: KVCD - MencodeMe - Auxiliar Task - KVCD Docking Gate by Prodater64.
Visit: Mencoder scripting with AVSEdit and Guide for Multiple Files by Prodater64.
Visit: Mini-guide quick and easy - DVD to (S)KVCD with MencodeMe by Maurus.
Visit: Mencode-me: a newbie oriented GUI - 0.23 is out! by VMesquita.
--------------------------
http://www.digitalfaq.com/archives/error.gif

oxycotton420 06-10-2004 05:13 PM
alright great thanks helpin me a lot, k now i got another problem lol that just ocured with the big VOB to 1cd KSVCD its a PAL so i did it at 25 FPS. but this is waht i got when it got to 2 PASS mode
[mpeg2video @ 0x9b50a0]rc buffer underflowmin 0mb A-V:0.000 [764:0]
..........
.................
[mpeg2video @ 0x9b50a0]rc buffer underflowmin 0mb A-V:0.000 [1121:0]
Pos:1366.4s 34161f (20%) 15fps Trem: 142min 0mb A-V:0.000 [903:0]]

so i stoppd it can u please tell me whats causing the problem thanks :)

Prodater64 06-10-2004 05:39 PM
Quote:
Originally Posted by oxycotton420
alright great thanks helpin me a lot, k now i got another problem lol that just ocured with the big VOB to 1cd KSVCD its a PAL so i did it at 25 FPS. but this is waht i got when it got to 2 PASS mode
[mpeg2video @ 0x9b50a0]rc buffer underflowmin 0mb A-V:0.000 [764:0]
..........
.................
[mpeg2video @ 0x9b50a0]rc buffer underflowmin 0mb A-V:0.000 [1121:0]
Pos:1366.4s 34161f (20%) 15fps Trem: 142min 0mb A-V:0.000 [903:0]]

so i stoppd it can u please tell me whats causing the problem thanks :)
Well, this message is often viewed with mencoder, but it seems that final encode will play fine in your PC as in your standalone.
It will be helpfull that you encode the movie and later tell us your experience.


--------------------------
Visit: Intermediate guide: MencodeMe/Win32 - Avisynth - MakeAvis by Prodater64.
Visit: KVCD - MencodeMe - Auxiliar Task - KVCD Docking Gate by Prodater64.
Visit: Mencoder scripting with AVSEdit and Guide for Multiple Files by Prodater64.
Visit: Mini-guide quick and easy - DVD to (S)KVCD with MencodeMe by Maurus.
Visit: Mencode-me: a newbie oriented GUI - 0.23 is out! by VMesquita.
--------------------------
http://www.digitalfaq.com/archives/error.gif

Koekies 06-11-2004 04:17 AM
Can anybody make a fakeavi with makeavis with the avisynth filter DCTFilter :?:


-Koekies

Prodater64 06-11-2004 04:24 AM
Quote:
Originally Posted by Koekies
Can anybody make a fakeavi with makeavis with the avisynth filter DCTFilter :?:
-Koekies
All my AVIS to SKVCD convertions uses Dialhot V4 script, with DCTFilter line active, of course. And I give this avs to mencoder as usual MakeAvis way.
Whats your problem Koekies?


--------------------------
Visit: Intermediate guide: MencodeMe/Win32 - Avisynth - MakeAvis by Prodater64.
Visit: KVCD - MencodeMe - Auxiliar Task - KVCD Docking Gate by Prodater64.
Visit: Mencoder scripting with AVSEdit and Guide for Multiple Files by Prodater64.
Visit: Mini-guide quick and easy - DVD to (S)KVCD with MencodeMe by Maurus.
Visit: Mencode-me: a newbie oriented GUI - 0.23 is out! by VMesquita.
--------------------------
http://www.digitalfaq.com/archives/error.gif

incredible 06-11-2004 08:16 AM
Watch out when using DCTfilter!!!
At 352x288(240) target resolution its a NO-GO! As it will soften the encoding significantly. Also at 352x576(480) it blurs too much.
Some users reported a "horizontal lines"-Problem even at 480x576(480), so u should test before ... I never had problems when using it on 480x576 targets, but for shure I did not use any blurring before like i.E. MergeLuma(blur()) etc.

Koekies 06-11-2004 11:06 AM
I allways encode 704x480. makeavis says

Evaluate: Unrecognized exception!
(ffvfw_avisynth_script, line 15)

and the script is

Code:
LoadPlugin("C:\utils\MovieStacker\Filters\MPEG2Dec3dg.dll")
LoadPlugin("C:\utils\MovieStacker\Filters\Undot.dll")
LoadPlugin("C:\utils\MovieStacker\Filters\Convolution3DYV12.dll")
LoadPlugin("C:\utils\MovieStacker\Filters\GripFit_YV12.dll")
LoadPlugin("C:\utils\MovieStacker\Filters\BlockBuster.dll")
LoadPlugin("C:\utils\MovieStacker\Filters\DctFilter.dll")

AviSource("C:\movies\Timeline\test.avi", false)
BlindPP(cpu=4)
BlockBuster(method="noise", detail_min=1, detail_max=3, variance=0.1, seed=1)
Convolution3D(1, 6, 12, 6, 8, 2.8, 0)
LanczosResize(672, 334, 4, 0, 568, 240)
Undot()
TemporalSoften(2,7,7,3,2)
DctFilter(1, 1, 1, 1, 1, 1, 0.5, 0)
AddBorders(16, 73, 16, 73)
Line 15 is the DctFilter

incredible 06-11-2004 11:14 AM
You found another filter which is not supported by Makeavis ;-)

till now we know:

- GripFit
- DCTFilter

Prodater64 06-11-2004 11:18 AM
A cup of questions?
1 - Does your script play fine in mplayer2 or virtual dub, without error messages?
2 - Do you perform in MakeAvis any color space conversion?


--------------------------
Visit: Intermediate guide: MencodeMe/Win32 - Avisynth - MakeAvis by Prodater64.
Visit: KVCD - MencodeMe - Auxiliar Task - KVCD Docking Gate by Prodater64.
Visit: Mencoder scripting with AVSEdit and Guide for Multiple Files by Prodater64.
Visit: Mini-guide quick and easy - DVD to (S)KVCD with MencodeMe by Maurus.
Visit: Mencode-me: a newbie oriented GUI - 0.23 is out! by VMesquita.
--------------------------
http://www.digitalfaq.com/archives/error.gif

Koekies 06-11-2004 12:03 PM
Well I copied the script in notepad. Used moviestacker to get the right values for lanczos and add borders.
Tmpegenc can use the script and when i load it in makeavis it gives that error.
Which version do you use?


-Koekies

Prodater64 06-11-2004 12:17 PM
http://cultact-server.novi.dk/kpo/av...S-20031113.exe


Do you perform with MakeAvis any color space conversion?


--------------------------
Visit: Intermediate guide: MencodeMe/Win32 - Avisynth - MakeAvis by Prodater64.
Visit: KVCD - MencodeMe - Auxiliar Task - KVCD Docking Gate by Prodater64.
Visit: Mencoder scripting with AVSEdit and Guide for Multiple Files by Prodater64.
Visit: Mini-guide quick and easy - DVD to (S)KVCD with MencodeMe by Maurus.
Visit: Mencode-me: a newbie oriented GUI - 0.23 is out! by VMesquita.
--------------------------
http://www.digitalfaq.com/archives/error.gif

Koekies 06-11-2004 12:27 PM
Do you mean force output colourspace?
I don't use that option. Should I?


-Koekies

oxycotton420 06-11-2004 12:31 PM
@Prodater64

thanks man yes it did work fine on my DVD player and my computer as well just to tell ya. anyways soon i will be learning your other guide. :)

Koekies 06-11-2004 12:32 PM
I've got the same version as you tried every option you can select and they all give the same error even if I deselect video :?

Prodater64 06-11-2004 12:38 PM
Quote:
Originally Posted by Koekies
Do you mean force output colourspace?
I don't use that option. Should I?
-Koekies
No, you don't. I asked just in case.
I had seen that kind of error only with gripcrop, gripsize and gripborders, that are not supported by MakeAvis. Maybe your version is not the mentioned above. If it is the case, please uninstall previous version and install quoted version.


@oxicotton420: Thank you.


--------------------------
Visit: Intermediate guide: MencodeMe/Win32 - Avisynth - MakeAvis by Prodater64.
Visit: KVCD - MencodeMe - Auxiliar Task - KVCD Docking Gate by Prodater64.
Visit: Mencoder scripting with AVSEdit and Guide for Multiple Files by Prodater64.
Visit: Mini-guide quick and easy - DVD to (S)KVCD with MencodeMe by Maurus.
Visit: Mencode-me: a newbie oriented GUI - 0.23 is out! by VMesquita.
--------------------------
http://www.digitalfaq.com/archives/error.gif

Koekies 06-11-2004 12:40 PM
VirtualDubMod gives this error when loading the script:

Avisynth open failure:
Sorry, DctFilter test version needs sizes multiples of 16x16

The source is 568, 240
568/16=35,5
Is this why it doesn't work?
Do I have to resize my avi now to get it to work :(


All times are GMT -5. The time now is 09:00 AM  —  vBulletin © Jelsoft Enterprises Ltd
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.