Set-up for Behringer Xenyx 802 with EQs
Hello,
I did purchased this tool. I want to do test with a standard old audio tape... I never use mixer table and I look like a kid when I am looking the deck... First I did use the CD/Tape stereo INPUT/OUTPUT cables (with a headphone in the phones jack hoping to heard some difference when playing with buttons) but then I noticed that EQ high-mid-low have no effect on audio.... Now I have the impression that I must used the 3/4 level column to capture audio to my computer? Meaning that I nead 1/4" TRS headphons connectors that will match my stereo RCA cables? THanks for you light Mejnour |
Some mixer boards only use EQ on 1/4" stereo inputs. The RCA inputs can only use gain and fade.
1/4-to-RCA cables are readily available at many electronics stores, as well as many music/guitar stores. For example, Amazon sells a cable for $6 total: http://www.amazon.com/gp/product/B00...SIN=B000TTHVYK ... although that RCA wire looks rather flimsy and unshielded. Therefore... This $7 non-wired adapter may be better: http://www.amazon.com/gp/product/B00...SIN=B002JDVBYU The only problem may be if it fits properly against the board. I realize you may not be in USA, and may not buy from Amazon.com, but you get the idea. Amazon.ca, Amazon.de, Amazon.fr, Amazon.at, etc -- lots of Amazons have them for low cost, in addition to the aforementioned local/online electronics and music stores. Just look around, get an adapter, and you'll be fine. |
It is better to buy the cable, like this:
http://www.amazon.com/Hosa-CPR201-Du...d_rhf_se_shvl2 http://www.digitalfaq.com/forum/imag...0_AA300_-1.jpg But, at least, I suggest you to buy 2 x these (you will find the need to use them in other situations too, studying your mixer further): http://www.digitalfaq.com/forum/imag...0_AA300_-1.jpg (they are working better then Y-like items, you will have more possibilities to use it!) |
1 Attachment(s)
Quote:
|
Surely there are mono, and it what is needed for him. Because he uses two RCA outputs from tape deck.
He should use them on 3/4 or 5/6 channel strip. http://www.digitalfaq.com/forum/error.gif |
Yeah, I must be tired. Looking at the board (instead of going off memory like I was), you're right. :)
It's about that time of day for me -- time to step away from the computer. |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.