How to edit IFO/ISO/VOB files?
I have a DVD that has a single 6GB title. I used DVDDecrypter to copy it to my hard drive and want to create 2 single layer DVDs. There are logical points within the 6GB where I could chop it up and create 2 single layer DVDs (about halfway through to give 2 3GB pieces). I don't want to compress it or re-encode it. Is there an easy to use tool which can edit the IFO/ISO/VOB file(s) to accomplish this? I tried VideoRedo but it grabs the wrong audio stream (the special features stream) and it does not do a good job with VOBs (they plan to support this in the future). And title set blanker is of no use since there is only 1 title.
|
How to split a DVD9 to TWO DVD-Rs using DVD Shrink
Note: This guide uses the old version of DVD Shrink. New versions should be the same, or very similar. STEP 1: Start DVD Shrink, load the disc (or files from hard drive) and select the main movie. http://www.digitalfaq.com/forum/uplo...inksplit01.gif STEP 2: Select No Compression. http://www.digitalfaq.com/forum/uplo...inksplit02.gif STEP 3: Select Re-Author. A new window opens. http://www.digitalfaq.com/forum/uplo...inksplit03.gif STEP 4: Drag main movie titleset from the first window to this new one. http://www.digitalfaq.com/forum/uplo...inksplit04.gif STEP 5: Select No Compression and then click Start / End. http://www.digitalfaq.com/forum/uplo...inksplit05.gif STEP 6: In End Frame you are going to select where you want it to split. http://www.digitalfaq.com/forum/uplo...inksplit06.gif STEP 7: Here I selected Chapter End at 24 instead of original 47. Then select OK to get the first disc. http://www.digitalfaq.com/forum/uplo...inksplit07.gif STEP 8: It should look like this. Select Backup! to save the first disc. http://www.digitalfaq.com/forum/uplo...inksplit08.gif STEP 9: Under Target Folder select where you want to save first disc. http://www.digitalfaq.com/forum/uplo...inksplit09.gif STEP 10: Wait for the encoding to finish. Then you have the first disc of the 2 disc set. NOTE! This is not really "encoding" as in "encoding video" but merely a poor way of saying "making the new files". No "encoding" is happening here. http://www.digitalfaq.com/forum/uplo...inksplit10.gif STEP 11: Repeat process. Start frame will be the next chapter after the one you ended with in step 6. Proceed same as before. http://www.digitalfaq.com/forum/uplo...inksplit11.gif STEP 12: Select another folder for disc 2. The "encoding" window comes up again. When it is finished "encoding" the split is done and ready to burn, using your favorite DVD-Video burning software. http://www.digitalfaq.com/forum/uplo...inksplit12.gif Please note: Portions of this guide actually came from another site, but I figured it would be nicer to keep you on site, help you here. Not merely redirect you all over the Internet. Have therefore reproduced it here for your convenience. Have also edited and streamlined it some, to keep it easy. |
Let me know if this did what you needed.
|
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.