ok so i finally got the correct driver disk for the AIW 7500VE PCI card.
however having a weird audio issue. the white audio input only works about half the time. if i start MMC and it isnt working, i i have to close and restart MMC sometime a few times and then it will work. tried 2 different brakeout cables and did an uninstall/reinstall - no dice i have 2 7500ve cards and both do the same thing. running MMC 9.03 any ideas? |
The wire could be buggy? Never seen that issue before, not in 10 years.
|
after more screwing around and even trying MMC 8.8 and still the same issue.
i connected the audio outs from the VCR directly to the sound cards line in using a RCA to phono jack adapter. bypassing the capture card completely. doing this it works perfect every time - i did a few test captures and it did not seem out of sync. is there any disadvantage doing it this way? im using a Soundblaser Audigy 2 ZS |
Quote:
never had this issue with the AGP card i use prior. i seem to have found a workaround by connecting directly to the sound card as opposed to the breakout box, as long as it isnt going to create any new issues... |
I was referring to the breakout box (purple or domino dongle/wire). ;)
|
i tried 2 different purple boxes - included the one i used with my AGP AIW.
have you ever tried connecting audio outs from the vcr directly to a sound card line-in? i did it on a whim and was surprised it captured without running through the AIW at all. -- merged -- another weird issue: it is fine with CBR, but when i capture VBR the bitrates are way off. i set a 352x480 for 4000 target and 4500 max and i end up with 2800 completed captures??? i never had these issue with my AGP card, wonder if i got a defective card? it was brand new sealed but... this is running 4gb of DDR2 and a 3.0Ghz dual-core cpu i also tired it on a Intel setup with 2gb of DDR2 and a 3.2ghz P4 with same results.(both the audio and VBR issues) i have searched and searched but cant find any decent AGP boards that have at least 3 sata ports,DDR2, and not a Via chipset. i have good CPU's here for sockets 478, 775 and AM2 |
Every run across MMC 9.04? Goggling finds some hits for folks saying it worked for their 550/650. Apparently was never made available as a download. Those who said it worked said they found it "hidden" on their orig install cd. Didn't find it on my 550 (180-V01105-200) or 650 (180-V0118-100) cds.
|
1 Attachment(s)
RE: ATI MMC 9.04
It would be nice. I've emailed some others online. This one is our best lead: http://www.dslreports.com/forum/r137...heater-550-Pro I'm also a member of dslreports.com, and sent him a private message. He's an active user, and was last online just 14 hours ago. I hope he has it, and we can attach it on the forum for others. Unfortunately, this is NOT one that is in our archive. It was only on a few early ATI 550 discs. We'll have to wait and see what happens. :wait: Have you tried to use ATI MMC 9.08? We do have that one. See attached. |
1 Attachment(s)
Octavian is a 550 user that'd posted on a number of forums in years past. This post he wrote on ATI MMC hacking may be useful. (I've edited it to be concise and quoted below.)
Quote:
I'm going to look into ATI MMC for the ATI 600 USB card on Windows XP. I doubt it'll work, but it something I can at least try. ATI MMC does work in Vista and Win7, though I've found it very a difficult scenario to recreate. |
kpmedia, I have mmc 9.08 that I downloaded back in 2009. Vaguely remember trying it, but don't remember results, so suspect it was not successful. I was only up to W2K at that time on the (slow) desktop boxes, so that may have been the cause. See that I also downloaded the release notes then. Any use here? Have Release Notes for a few of the Catalyst (6.2, 6.11, 6.13, 10.2, 10.9) downloads too.
lordsmurf, this mmc 9.03/9.08 hybrid sounds promising. Will try. Thanks. |
2 Attachment(s)
couple ATI driver files i had - not AIW but my be useful to someone
1 is for an ATI E-Home Wonder and the other is a PCI VE |
Importatnt question
Does the Ati card has to be AIW or only have to have Rage Theatre chipset ?
Have 9550 vivo with ATI Rage Theater ( not Theatre ) 213RT1ZUA43 MKLPW 0516AA. What's up ? Regards |
This guide has been great for me to get caught up quickly with what needs to get done.
Unfortunately for me it looks like it's missing ISOs and/or install listings that would work for my AIW 7500 VE PCI card. If available, can we get an installation listing or ISO for 180-V01060-100? I have an NT line with XP SP3 (missed my exit with SP2 when Microsoft still supported XP) Thank you very much. Appreciate any help I can get to get this card rolling |
I think i actually have the same card.
I have two different Driver setups, not sure which of them is correct, please try this one, if it doesn't work i will upload the other (It's to big for SendSpace). https://www.sendspace.com/file/6g5l7b |
Thanks zerowalker,
That ISO is already available here and doesn't work for my card/set up. http://www.digitalfaq.com/forum/vide....html#post9470 What's the other CD's version? |
The other one is: 180_V01060_100
|
That's the one people were looking for
|
know where i can upload it?
It's a bit over 300mb. |
Yup. Right here. =)
http://www.digitalfaq.com/forum/news...ly-upload.html |
It doesn't allow over 32mb, mine is 310mb.
EDIT: Oh guess you want me to split it up? Damn hate stuff like that. Will do like this, i will upload it to my google drive, when you got it, i will remove it from there as it takes to much space:P Here: https://drive.google.com/file/d/0B_U...it?usp=sharing |
Site design, images and content © 2002-2024 The Digital FAQ, www.digitalFAQ.com
Forum Software by vBulletin · Copyright © 2024 Jelsoft Enterprises Ltd.