Quantcast Look what I found- Jig-RCU! - digitalFAQ Forum
  #1  
01-26-2022, 11:11 PM
drzapp drzapp is offline
Premium Member
 
Join Date: Dec 2018
Posts: 97
Thanked 10 Times in 8 Posts
I've had a web crawler looking for the PTU94023B for over a year, and a few months ago, I got a hit on a site in the Netherlands. They would only mail it to EU countries, for some reason, but I have a good friend in Germany, so I had them send it to her. She then sent it to me- took 3 months for this process, but it is finally here and it works! Now I can do the final dynamic drum adjustments after a rebuild.
*happy dance*


Attached Images
File Type: jpg 0126222148[1].jpg (67.0 KB, 19 downloads)
Reply With Quote
Someday, 12:01 PM
admin's Avatar
Ads / Sponsors
 
Join Date: ∞
Posts: 42
Thanks: ∞
Thanked 42 Times in 42 Posts
  #2  
01-27-2022, 01:03 AM
latreche34 latreche34 is offline
Free Member
 
Join Date: Dec 2015
Location: USA
Posts: 2,134
Thanked 364 Times in 334 Posts
Keep us posted with your findings here please, Can you share the manual for DD adjustment? I've been looking for one for years, I've never found it in the service manual, at least the models I've owned.

https://www.youtube.com/user/latoak34/videos
Reply With Quote
  #3  
01-27-2022, 01:25 AM
drzapp drzapp is offline
Premium Member
 
Join Date: Dec 2018
Posts: 97
Thanked 10 Times in 8 Posts
It is in a few I have, this is the most complete description I found, in the 9800u service manual section 3.2.3 (attached).


Attached Files
File Type: pdf JVC HR-S9800U Service Manual 82805.pdf (1.28 MB, 4 downloads)
Reply With Quote
  #4  
01-27-2022, 02:48 AM
latreche34 latreche34 is offline
Free Member
 
Join Date: Dec 2015
Location: USA
Posts: 2,134
Thanked 364 Times in 334 Posts
I've seen that before, I was expecting a detailed mechanical adjustment. Why would you want to re-adjust the DD system? have you replaced the video drum or any gears in the DD system, Otherwise there is really no need to mess with the adjustment especially if the gears are cracked.

If you have taken the gears a part, first a mechanical adjustment is required to balance the left and right screw gears before you do any electronic adjustment to the DD motor. So that there is no slack or overload on the bottom of the drum.

https://www.youtube.com/user/latoak34/videos
Reply With Quote
  #5  
01-27-2022, 02:58 AM
drzapp drzapp is offline
Premium Member
 
Join Date: Dec 2018
Posts: 97
Thanked 10 Times in 8 Posts
Yes, I am taking the DD apart and replacing or repairing gears. I already have the mechanical adjustment figured out- I just mark where everything is before taking it apart, seems to work well enough, but still some noise that could be cleaned up with the Jig.
Reply With Quote
  #6  
01-27-2022, 02:05 PM
latreche34 latreche34 is offline
Free Member
 
Join Date: Dec 2015
Location: USA
Posts: 2,134
Thanked 364 Times in 334 Posts
Do you have the stair step JVC alignment tape for that test?

https://www.youtube.com/user/latoak34/videos
Reply With Quote
  #7  
01-27-2022, 02:20 PM
drzapp drzapp is offline
Premium Member
 
Join Date: Dec 2018
Posts: 97
Thanked 10 Times in 8 Posts
I do have a stairstep alignment tape, not sure if it is from JVC.
Reply With Quote
  #8  
01-27-2022, 02:49 PM
latreche34 latreche34 is offline
Free Member
 
Join Date: Dec 2015
Location: USA
Posts: 2,134
Thanked 364 Times in 334 Posts
No one made dynamic drum, it's either a JVC tape or a tape from another manufacturer for a different test, Be careful when you use test tapes, Always use the right tape for the right test by checking tools part numbers or you will be setting off of wrong frequencies.
Reply With Quote
Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot locate TBC [FOUND] Dan316 Marketplace 1 06-27-2020 04:59 PM
Found old Betamax VCR, should I get it? bobbintb General Discussion 6 08-21-2019 10:59 AM
Wanted: PAL TBC [FOUND] Sousuke Marketplace 0 08-09-2018 03:56 AM
Wanted: PAL TBC [FOUND] TechWizard Marketplace 2 08-01-2018 06:49 AM
Wanted: ATI TV Wonder HD 600 USB [FOUND] Igotquestions Marketplace 1 06-13-2018 07:32 AM

Thread Tools



 
All times are GMT -5. The time now is 04:47 AM