#1  
06-21-2007, 12:09 PM
Tom_n_Jonna Tom_n_Jonna is offline
Free Member
 
Join Date: Jun 2005
Location: Montgomery, Alabama, USA.
Posts: 58
Thanked 1 Time in 1 Post
Hi guys...need some help.

I've been searching the net and have found nothing but conflicting info.

I picked up an ATI x1900 AIW and installed Catalyst 7.1, then MMC 9.15 and my system started uncontrolably rebooting itself. It would start, get into windows XP, then shut itself down again.

I have an ASUS board using an AMD X2 5200+.

Any suggestions besides getting another board? Which versions of Catalyst and MMC can I safely use and still leverage the capabilities of the board?

Thanks!

Cheers...Tom
Reply With Quote
Someday, 12:01 PM
admin's Avatar
Ads / Sponsors
 
Join Date: ∞
Posts: 42
Thanks: ∞
Thanked 42 Times in 42 Posts
  #2  
06-21-2007, 12:54 PM
wheezer210 wheezer210 is offline
Free Member
 
Join Date: Jun 2005
Posts: 101
Thanked 0 Times in 0 Posts
I had an AIW x800xt for a LONG time, and I always used the 5.10 drivers and the MMC 9.06. (never updated even for gaming)

No matter what I did, if I used any other driver combo my pc crashed like a mofo but using these it aways worked.

here are the 5.10:
http://support.ati.com/ics/support/d...estionID=20767

here is the mmc 9.06:
http://support.ati.com/ics/support/d...estionID=20767

good luck I know what a frustrating pain in the arse driver combinations can be.
Reply With Quote
  #3  
06-21-2007, 08:51 PM
Tom_n_Jonna Tom_n_Jonna is offline
Free Member
 
Join Date: Jun 2005
Location: Montgomery, Alabama, USA.
Posts: 58
Thanked 1 Time in 1 Post
Thanks Wheezer...

I checked these out....seems 5.10 does not have native x1900 support. Not sure how that will work, but am desparate enough to try it anyway at this point. More to come.

Cheers...


Cheers...Tom
Reply With Quote
Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
JVC SR VS20U VCR having trouble Jpass992 Video Hardware Repair 15 08-09-2013 04:06 PM
Dell PC hang at start up, afraid to shut down again Sossity Computers 8 11-04-2011 06:59 AM
Accidently shut down computer by turning off surge switch - Did I do damage? Sossity Computers 1 02-09-2011 05:23 AM
Trouble with TBC...HELP! Tom_n_Jonna Restore, Filter, Improve Quality 3 01-21-2006 12:39 AM
Having some trouble... Daniel Capture, Record, Transfer 9 06-06-2005 10:25 AM

Thread Tools



 
All times are GMT -5. The time now is 05:44 AM