Here's a simple/cheap thing I had to make, to keep my cats from loosening/chewing on my equipment wires, while keeping hairs out, and allowing air-flow for cooling, plus allows a visual, but still be removable for access. It's not perfect, yes they could jump over, and in if they wanted too, But by now they have been trained to stay out!. It's made from Nylon screen, (Not Metal!, a wrap-around screen made of metal could cause RF or other problems) and stapled to 2 old picture frames, which are loosely inserted into both sides. At first I was using a removable,cut-to-fit cardboard box around equipment, but I couldn't see anything, and there was no airflow!..(Heat from the PC,UPS and Ext Drives had nowhere to go).
KAT GUARD Front view (640x480).jpg
^ Kat Guard laid on floor
You must be logged in to view this content; either login or register for the forum. The attached screen shots, before/after images, photos and graphics are created/posted for the benefit of site members. And you are invited to join our digital media community. |
^ Kat Guard Dis-Engaged
KAT GUARD DIS-ENGUAGED (640x480).jpg
^ Kat Guard Engaged
You must be logged in to view this content; either login or register for the forum. The attached screen shots, before/after images, photos and graphics are created/posted for the benefit of site members. And you are invited to join our digital media community. |
^ Kat Guard Working..Bad Kitty!
KAT GUARD ENGUAGED (640x480).jpg
^ Kat Guard Working..Good Kitty!