Hello,
I am trying to digitize video8 tapes using this setup:
CCD-TR512E PAL -> (AV Composite) -> Panasonic DMR-ES10 (European) -> (AV Composite) -> Elgato Video Capture ->
VirtualDub
DMR-ES10 Settings: Progressive=on, Comb Filter=on, AV line NR=off
I attached a sample capture. The addition of the ES10 helps greatly, but it sometimes introduces bouncing during damaged sections of the tape (First 5 seconds of attached clip). I am using a European version of ES10 where AV1 and AV2 are both SCART (Image Attached). I do not think that the video capture card is at fault here, since I tested the setup with a TV Screen and I saw similar results.
I tested different input ports of ES-10: AV3 (front) and AV4 (back). I also tested the output ports: AV out, S-Video, AV2 (SCART). They all exhibit the same behavior.
Why does the ES-10 introduce bouncing? What is the easiest way to reduce it?
Thanks a lot.