01-17-2021, 02:23 AM
Ronald_D Ronald_D is offline
Free Member
Join Date: Jan 2021
Posts: 6
Thanked 0 Times in 0 Posts
Hi there,

Before starting digitising VHS and S-VHS videotapes i like to know how to start with the best possible video-signal from my Panasonic NV FS-200 recorder. Logical to use the S-VHS output from the Panasonic NV FS-200 but the manual says the AV1 scart output can be switched to NORMAL or S-VIDEO. In the layout of the scart-connection i see R-G-B on pins 7 - 11 and 15 offered when the switch is set to NORMAL at both scart outputs. I made a scart - RGB cinch for this 3 connections to connect the Panasonic NV FS-200 to my TV but no signal. Is the S-VIDEO output the best quality output i can get from this recorder?

Attached Images
File Type: jpg panasonic scart.jpg (62.8 KB, 5 downloads)
Reply With Quote
Someday, 12:01 PM
admin's Avatar
Ads / Sponsors
Join Date: ∞
Posts: 42
Thanks: ∞
Thanked 42 Times in 42 Posts
01-17-2021, 06:36 AM
hodgey hodgey is offline
Free Member
Join Date: Dec 2017
Location: Norway
Posts: 1,659
Thanked 440 Times in 378 Posts
You want to use S-Video. VCRs, including this one, do not normally output RGB, they can only pass RGB from one scart input to another scart output. VHS is natively Y/C
Reply With Quote

panasonic nv-fs200

Similar Threads
Thread Thread Starter Forum Replies Last Post
JVC TBC always stabilizes s-video output? via Email or PM Capture, Record, Transfer 1 11-13-2019 11:00 PM
Panasonic DMR-ES10 (PAL) no video output? lordsmurf Video Hardware Repair 9 07-27-2019 07:30 AM
Panasonic NV-HS1000 has no video output? peter847 Video Hardware Repair 30 09-01-2015 01:35 PM
Womble MPEG Video DVD Wizard - Choppy Video Output jbd5010 Edit Video, Audio 3 07-24-2014 03:17 PM
Panasonic NV-HS1000 NTSC output Medusaman Capture, Record, Transfer 2 02-19-2013 05:05 PM

Thread Tools

All times are GMT -5. The time now is 11:05 AM