Quote:
Originally Posted by Jayce72
My Panasonic DMR ES10 has no audio output.
|
ES10/15 usually (though not always) has audio delay internally. So audio must be routed through the unit. If routed external, it must be somehow delayed prior to capture.
I have an ES10 with no delay, but it was apparently an NTSC early version unit. Latter units have delay. I've never seen (or heard about, read) a PAL unit that not delay.
But also remember: the ES10/15 is not a true TBC. It is a minimalist TBC(ish) device, with strong+crippled line TBC, and non-TBC frame sync. This can matter, and often does. This item was
never suggested as some sort of "TBC replacement" because it's not. The ES10/15 can still pass or even induce dropped frames, thus cause audio sync issues. It needs to be chased by at least a weak frame TBC (example: the "also has" non-TBC DataVideo items "with TBC").
Quote:
I am capturing using:
Windows 10
VirtualDub (64 bit)
|
Sometimes Win10 can induce issues. It's a really crap OS for capturing. It can work, and well. But more often, it does not, and is a glorious orgy of problems.
I am getting audio sync issues - I have tried differing combinations in the timing section and getting issues
So I dont know whether:
1. I cant by bass audio without issues
2. I have my timing settings all messed up[/QUOTE]
Quote:
Originally Posted by Jayce72
Didnt think that was relevant to the precise question I asked. But its
- Panasonic video player
- Dazzle DVC100 capture device
|
Everything is relevant when it comes to capture.
That's a "meh" VCR combo deck, bog standard "better" low end unit from 2000s (VHS EOL). But for this base setup, perhaps fine.
That is a known terrible capture card. The DVC100 boxes completely screw up with image values (color, brightness, contrast, etc), and are especially awful at overexposing. Your videos tend to be extremely butchered. This all gets double worse, since the PAL ES10/15 can have luma gain issues. And the audio on it is not great, and sync issues can be there as well.
Overall:
- the Dazzle is a problem, replace it with a known quality card
- that ES10 may not function for you, for this setup, you'll have to get another with audio passing