Welcome.
Quote:
Originally Posted by ethanchal
Symphonic combo VHS player in the garage that only outputs composite over its Scart output. The VHS-C camcorder used was a Panasonic NV-S5B which I still have but now fails to playback - I've read that these playback mechanisms are generally poorly made for decent capture anyway.
|
Correct, junk.
Symphonic is one of the worst brands of electronics ever made, the lowest of the low-end. We bought some of that cheap junk for our garage back in the late 80s to early 90s, and it never lasted. Even when it was new, it worked poorly.
Quote:
|
So, my first question is why are S-VHS players recommended for VHS/VHS-C capture when those sources don't store the improved resolution/frequencies on the tape in the first place? Is it just the playback mechanism of these players that we benefit from? Or do camcorder VHS-C recordings still store separate Y/C regardless of tape which can only be pulled cleanly via a player with S-Video support?
|
Correct:
- better quality internals
- tape data is Y/C (s-video aka separated video), so no crosstalk noises, no massive lowering of quality like composite
- it's not about the tiny % of resolution boost from S-VHS tapes
Quote:
|
Capture Card = I-O Data GV-USB2
|
This is not a good card. Lots of issues. It has a few overly vocal fans online, but they're never anywhere to be found when issues always arise. Or they just blame you, often with horsey attitudes.
Quote:
This is not a TBC. It's a passthrough DVD recorder with a strong+crippled line TBC and non-TBC frame sync. But it always has AGC aggression, hot luma issues (especially for PAL), posterization, and some other problems. It's the "better than nothing" approach, but it's not at all a TBC. It does not prevent dropped/inserted frames, but rather bakes in. It does clean the image nicely, which is why it is suggested for anti-tearing. (There are some other items that are much better, overall, at anti-tearing, but ES10/15 type is much easier to locate.)
Quote:
|
VHS-C adapter = Panasonic VW-TCA7E
|
This is a powered Matsushita, essentially "clone" of recommended JVC C-P7U. So you're good here.
Quote:
|
Regarding Hi8 I still have the original Canon UC-X10HI camcorder that was used and from reading this forum is the optimal player for capturing Hi8. I'm happy with the workflow of using the S-Video out into the ES10 and out (via AV1) into the GV-USB2.
|
This best Hi8 camcorders have internal line TBC for playback, and the ES10 is just used for non-TBC frame sync. But again, you're degrading the quality from the tape. It looks better with the ES10, but a real TBC is needed to prevent dropped/inserted frames (and thus also maintain audio sync).
Quote:
|
I've seen a decent JVC HC-S5955 on Facebook for £20 but I've heard that JVC like to eat VHS-C tapes for breakfast.
|
Don't screw around with Facebook, it almost never ends well. It's actually worse than eBay, and eBay junk VCRs are infamous. Those are dumping grounds, not the location of properly functioning nice gear. Get your PAL deck from VCRShop, and then resell it when done.
Yes, JVC HR series do not play nice with -C tapes, so I'd instead look at the Panasonic NV-FS88. The image quality is overall worse on Panasonic compared to JVC, though still vastly better than low-end VHS VCRs, but eating a tape is definitely worse.
