Guide to Convert Divx to KVCD - Page 10

Tutankhamun · #**181** 03-09-2003, 01:45 PM

Hey CheronAph, thanks for the reply. I only get the error when I add ConvertToYUY2. I get that error "Must Be YUY Format" with all the filters that are commented out. So if I add ConvertTo.... then it wont load! If I dont add that it will load but I cant apply any filters. I tried the ReadAVS and followed the directions and I cant get it to work. I edited the reg file and pointed to readavs dll in tmpgenc directory with the double \\ like it says and then double clicked to install and it wont work. I thought I was missing something that is why I asked if I needed a .dll for the ConvertToYUY2 line. I figured I didnt need one since I didnt see one in any of the posted scripts but I still thought I'd ask. I'm stumped!

CheronAph · #**182** 03-09-2003, 02:08 PM

Try the .avs file that is in the first page of this thread just change the shortcut to your filters, it´s so simple that it has to work!

Tutankhamun · #**183** 03-09-2003, 02:28 PM

OK, just tried the script from the first page and changed plugins to my directory and when I loaded I got the must be yuy error for first legal clip so then i put in converttoyuy2() and i get the same error, cannot open unsupported. Man am I totally bummed!!!!!!!!!! Thanks for all the help guys but I dont know what else to do!

CheronAph · #**184** 03-09-2003, 03:53 PM

You should propably load all programs again and start from scratch...

Tutankhamun · #**185** 03-10-2003, 09:35 PM

CheronAph, I did that three times already! That is why I am just about ready to give up on the downloaded clips, or at least take a break before I pull my hair out

Thanks for all the help! I will keep playin with it in hopes that I will figure it out.

CheronAph · #**186** 03-11-2003, 02:12 AM

And you have tried other .avi files too so you know that the file is allright?

Xenocide · #**187** 03-14-2003, 11:34 PM

Sorry, complete newb here. I followed the instructions as well as I could, but when I run ToK and it loads up TMPGEnc, it gives me this message -

sampler: samples must be >=2
f:\complete movies\here\video.avs, line 26

Any reason why I'm getting this? Is it supposed to do this?

Thanks...

kwag · #**188** 03-14-2003, 11:44 PM

Hi Xenocide,

Did you download the latest "ToK" just posted earlier today?
Version 0.0.4.1 here: http://www.kvcd.net/forum/viewtopic.php?t=3096

-kwag

Xenocide · #**189** 03-14-2003, 11:51 PM

Same damn error message with new version.. just says line 28 now instead of 26...

Xenocide · #**190** 03-15-2003, 12:01 AM

My AVS script made with Moviestacker says...

#==============================================#
# -= AviSynth script by MovieStacker v1.1.1 =- #
#==============================================#

LoadPlugin("C:\avi2vcd\MovieStacker\Filters\MPEG2D ec.dll")
LoadPlugin("C:\avi2vcd\MovieStacker\Filters\Tempor alCleanerOld.dll")
LoadPlugin("C:\avi2vcd\MovieStacker\Filters\GripFi t_preview.dll")
LoadPlugin("C:\avi2vcd\MovieStacker\Filters\BlockB uster.dll")
LoadPlugin("C:\avi2vcd\MovieStacker\Filters\DustV5 .dll")
LoadPlugin("C:\avi2vcd\MovieStacker\Filters\LegalC lip.dll")
LoadPlugin("C:\avi2vcd\MovieStacker\Filters\Sample r.dll")

AviSource("F:\Complete Movies\hero.avi")
LegalClip()
GripCrop(352, 576, overscan=1, source_anamorphic=false)
GripSize(resizer="BilinearResize")
SpaceDust()
TemporalCleaner()
BlockBuster(method="noise", detail_max=7, variance=0.5, seed=1)
GripBorders()
LegalClip()

Sampler(length=24)
## MPEG size = ((Total frames/MovieTimeInMinutes)/24) * MPEG sample file size * .98 ##

I've tried KVCD_352x240_PLUS.pst, KVCD_352x480_PLUS.pst, KVCD_704x480_PLUS.pst, and KVCDx3_528x480.pst and all of these templates give the same error as above.. The movie I'm trying to convert from divx is 640x240 / 25fps.

kwag · #**191** 03-15-2003, 12:19 AM

Try to open a .d2v with ToK, and see if you get the same error. It could be a problem with your source

Xenocide · #**192** 03-15-2003, 01:27 AM

Well, I just tried a completely different movie and I am still getting the error... one thing about this new ToK that I notice, is that when I load the AVS script, ToK gives the error message of

" is not a valid integer value

Stranger and stranger... any help appreciated, I would really love to get this all working

kwag · #**193** 03-15-2003, 02:00 AM

Quote:

Originally Posted by Xenocide

one thing about this new ToK that I notice, is that when I load the AVS script, ToK gives the error message of

" is not a valid integer value

Go to the "Audio & More" tab and select "Calculated audio size".
Now close ToK, re-open it, and load your file again.

-kwag

Xenocide · #**194** 03-15-2003, 02:37 AM

How do I load my audio file after that? Do I choose External Audio file again?

Xenocide · #**195** 03-15-2003, 02:40 AM

Still getting that error in TMPGEnc even if I leave it on Calculated Audio Size..

Tutankhamun · #**196** 03-30-2003, 11:21 PM

Now that I finally got tmpgenc to open my avs script I was wondering if anyone had any suggestions as to a good script for downloaded episodes? I have a bunch of MacGyver - yes I'm a MacGyverism nut - episodes that I would like to put on cd but some have strange quality. If I view in WMP, it has some blocks, but if I view in Divx Player it look beautiful. I know it sounds weird but . . . ?

Cyanide/lsd · #**197** 04-01-2003, 04:06 PM

Hiya m8! I followed your guide got all the tools clicked staart in tok and i got an error message.

The instruction at "0x01cf515b" referenced memory at "0x02079fac"
The memory could not be "read"

Click on ok to terminate programme.

Any ideas what the prob might be, or is it something i've done, please help as i have been at this since 10am this morning and it's driving me crackers.

Thanx in advance

Ian

AmericanKickboxer · #**198** 04-01-2003, 09:55 PM

Hey,

I've been searching throughout this huge, wonderful site just flowing with info. for about 4 hours, and I can't seem to get a break.

I am looking for a way to take a 110 Min. movie which is an *.AVI file, and turn it into the KVCD format using your KVCD sequence so it will fit onto an 80 min. CD-R disc to play in my DVD player.I have read several guides, but they seem to have pieces missing, for example;the listing of some softwares that aren't used in the process!

confused... and I am reading such good things and I am so fired up about it and have alot of these required software to do this : TMPGenc, VCDeasy, Moviestacker, many others and your kool little KVCD prediction meter. I have all the materials but don't have the plans to build such a breakthru in VCD technology.

(well compared to my 3 CD collections with no quality...

) I have created a VCD using the guides from VCDhelp.com just to name a few, and stumbled across ya'lls ideas then I was hooked. My videos usually skip and audio would still advance, then the picture would catch up to the audio.

It is blocky also, because it was kind of "blown up" from the computer version by my DVD player

I used TMPGenc and Ulead's DVD moviefactory for menus. WHAT WENT WRONG?

PLEASE HELP

THANX

[/i][/url]