How it works:
- Input a video signal into the TBC-100 using s-video or composite input. Connect the signal cable to the TBC-100's Input connector marked as "SIN
" for s-video input or "VIN
" for composite input.
- Output the corrected signal from the TBC-100's output connection marked as "SOUT
" for s-video output or marked as "VOUT
" for composite output. Connect the output cable to a capture device.
- The TBC in the Panasonic NV-HS1000 is a line-level tbc. The TBC in the TBC-100 PCI is a frame level tbc.
You need both types of TBC for VHS capture.
- The TBC-100 PCI is not a capture device. It was designed primarily to interface with either a PCI or AGP capture card mounted above or below it in the same computer.