For sale: TBC-1000, TBC-3000, green AVT-8710, more

[lateralus]

Lordsmurf - I'm very sorry for your loss, and I hope you are doing well otherwise.

It seems like most others here have purchased items after I purchased the TBC, but I haven't heard anything back after sending the payment or after reaching out several times via PM / email. I also see from a few weeks ago that you have started to ship items from the backlog and that you've been responsive to others in that time, so I'm hoping that my payment and messages haven't slipped through the cracks. If you could please confirm that you did receive payment for that TBC and / or any other quick update, that would be really appreciated. I also apologize if my request comes off as pushy - it's just that I've been waiting in the dark and I'm not sure how else to get in touch with you.

Thank you, and I'm looking forward to hearing from you again!

[karlswagan]

I understand, I lost a coworker suddenly last month. Tomorrow isn't promised, and sometimes you need to take time to grieve or grapple with whatever life throws at you.

Not angry, just due to my circumstances I was worried the device would be shipped when I wasn't around to receive it, or worse, when I had already moved.

I look forward to your email. We can figure out when is best to ship it out.

And I hope you're doing ok personally.

-- merged --

Lordsmurf, I sent an email with my new address information which you replied to, but I haven't heard from you

-- merged --

Thank you! There was more to that message I wrote than got posted, not sure where the rest of it went. Sorry didn't mean to sound so short. I'll wait to hear from you tomorrow.

-- merged --

LordSmurf once again reaching out here because I don't know if you're seeing my emails. I'm asking for an update on the shipping of the TBC you said you would ship out 2 weeks ago. Please let me know, thank you.

[lordsmurf]

I just wanted to update this post...

Theogen, karlswagan, amvoith, lateralus: Thanks, loss can be hard to deal with, and time is always needed to process. Not just emotionally, but the many tasks you now have to face.

To others reading, all backlogs have been dealt with.

And at the moment, only a handful of TBCs are left. (The world of TBCs is currently an arid desert.)

Quote:

Originally Posted by karlswagan

Lordsmurf, I sent an email with my new address information which you replied to, but I haven't heard from you

I'll email you back tomorrow.

[Technicolour]

I'm chasing Lordsmurf as well. I purchased a Tbc and Capture card from him. I haven't been getting any response to my PMs either..

[phoenix96]

Quote:

Originally Posted by lordsmurf

...

Lordsmurf, I need an update on my purchase. It sounds like several other people are due updates as well.

[lordsmurf]

Health, got knocked down, better now.
Email me if needed, but all should be resolved this week and next.

Hindsight note: This was a false start. That happens at times. Feel better, then knocked down again, and harder the 2nd time.

[Rno_1]

I'm looking around for an NTSC TBC. When you get info on those NTSC DataVideo models, could you please PM me, lordsmurf?

[lordsmurf]

Quote:

Originally Posted by pkntl

karlswagan, phoenix96, Technicolour, have any of you received any news from lordsmurf? I've had no news from him after his message last week about resolving all shipments either last week or this current week.

See this thread for updates: https://www.digitalFAQ.com/forum/new...s-updates.html

[pkntl]

Lordsmurf, any updates on the TBC I purchased? I haven't been getting any replies to my PMs. Do you have an ETA as to when it will be shipped? Thanks.

-- merged --

I'm also waiting for an update that he said he'd send 2.5 weeks ago.

-- merged --

karlswagan, phoenix96, Technicolour, have any of you received any news from lordsmurf? I've had no news from him after his message last week about resolving all shipments either last week or this current week.

-- merged --

Quote:

Originally Posted by lordsmurf

See this thread for updates: https://www.digitalFAQ.com/forum/new...s-updates.html

Thanks for the info.

-- merged --

Would also like to get an estimate on the potential ship dates. Thanks.

[Chupperson]

Just checking in to see if you have an estimate when the rest of your shipments might get done or where I am on the waiting list. Thanks.

[lordsmurf]

@Chupperson, TBC sent, enjoy!
@pkntl, PM me.

After a long dry spell, several months, I have several TBCs again. Due to health, TBC refurbs took longer than normal, in the back half of this year. But all are finished now, units ready to go. Anybody owed a TBC has gotten theirs, or is getting soon.

And I have a few left!

Remember, this isn't some random eBay crap in random condition, that won't work correctly, as sold by some random person (often some recycler) that doesn't know a TBC from a toaster. Refurb'ing and even rebuilding takes time and skill. My goal has always been to grant these devices a second wind, to last another decade or more. And so far, to my knowledge, since 2016, it's been happening. And I'm quite proud of that.

[lordsmurf]

All NTSC+PAL TBCs are now on sale for a limited time. Need to move a few units.

[Hushpower]

Disregard.

[Mack]

I am interested in a PAL TBC.

[vacantrush]

Payment sent for the "DataVideo TBC-1000, rebuilt and refurb'd"

[t4c0c4t]

I'm looking for a TBC that can handle circuit bends in a live video performance scenario. Would the blue DataVideo produce desirable results (No drops, smooth interpolation)? Currently using a Videotronics MX1 and looking for something smaller.

[lordsmurf]

Quote:

Originally Posted by t4c0c4t

I'm looking for a TBC that can handle circuit bends in a live video performance scenario. Would the blue DataVideo produce desirable results (No drops, smooth interpolation)? Currently using a Videotronics MX1 and looking for something smaller.

If you're patient, I'll have something for this, PM me to be put on wait list.

The blue is somewhat more hit-or-miss, hence only a TBC(ish), not 100% reliable TBC, and priced as such, but still way better than the MX-1.

[aoe204]

Hi, I am looking to purchase a premium workflow set up to transfer VHS tapes. I have a Mac studio and edit with Davinci resolve. I could use some guidance.